Optoma Projector Hd8600 User Manual

							English

User Controls
Image | Advanced 
| PureEngine
 PureDetail
PureDetail is an edge enhancement tool that better defines the 
edges in the projected image thus providing more perceived detail.
 PureColor
This adjustable item utilizes a new color-processing algorithm and 
enhancements to enable the picture’s vividness to be significantly 
increased. The range is from “0” to “5”.
 PureMotion
PureMotion uses sophisticated algorithms to ensure that the   
natural motion in the image is preserved.
  PureEngine Demo
This feature enables you to see the difference in the image quality 
between the raw unprocessed image and the image processed by 
the PureEngine. Use this mode to check the adjustments that you 
make to the PureEngine settings.      
						

							
User Controls
 Format
Use this function to choose your desired aspect ratio.
 4:3: This format is for 4x3 input sources.
 16:9: This format is for 16x9 input sources, like HDTV and DVD 
enhanced for Widescreen TV.
 LBX: This format is for non-16x9, letterbox source and for users 
who use external anamorphic lens to display 2.35:1 aspect ratio 
using full resolution. 
Detail informations about LBX mode :
1.   Some Letter-Box DVDs are not enhanced for 16x9 TVs. In 
this situation, the image will not look right when displayed in 
16:9 mode. 
In this situation, please try to using the 4:3 mode to view the 
DVD.
If the content is not 4:3, there will be black bars around the 
image in 16:9 display. For this type of content, you can use 
LBX mode to fill the image on the 16:9 display. 
2.  If you use an external anamorphic lens, this LBX mode also 
allows you to watch a 2.35:1 content (include Anamorphic 
DVD and HDTV film source) that support anamorphic wide is 
enhanced for 16x9 Display in a wide 2.35:1 image. 
In this case, there are no black bars. Lamp power and   
vertical resolution are fully utilized.
Display      
						

							English

User Controls
 Native: This format displays the original image without any  
scaling.
  Overscan
Overscan function removes the noise in a video image. Overscan 
the image to remove video encoding noise on the edge of video 
source.
 Edge Mask
 Press the  to reduce the size of an image.
 Press the  to magnify an image on the projection screen.
 V Image Shift
Shift the projected image position vertically. 
 V Keystone
Press the  or  to adjust image distortion vertically and make a 
squarer image.
Each I/O has  
different settings of 
“Overscan”.
NoteNote
When “AUTO235” is 
enabled for 12v OUT B, 
display “Format” is set 
to “Auto235” and can -
not be changed.
NoteNote
Input Signal
Display area
Picture area
Display on Screen      
						

							
User Controls
“SuperWide” is Off“ 
as default.
How to use  
“SuperWide”
1.   Obtain a 2.0:1 aspect ratio screen
2.  Switch SuperWide ON
3.  
Align the projector image correctly on 
the screen
4.   Enjoy movies without black bars
NoteNote
 SuperWide
SuperWide is a feature that uses a special 2.0:1 aspect ratio 
screen enabling both 16:9 and 2.35:1 aspect ratio movies to be 
shown without black bars at the top and bottom of the screen
 Off: Your desired aspect ratio can be selected - 4:3, 16:9, LBX 
and Native.
 Auto: To solve the differences of the film formats, the option 
can keep the format in the same ratio.
 On: a. On (16:9): Fixed 2.0:1 mode for 16:9 content.
b. On (2.35:1): Fixed 2.0:1 mode for 2.35:1 content.      
						

							English

User Controls
 Menu Location
Choose the menu location on the display screen. 
 Lamp Settings
Choose this menu to adjust your desired lamp setting.
 Projection
   Front-Projection
This is the default selection. The image is projected straight on 
the screen.
   Rear-Desktop 
When selected, the image will appear reversed.
   Front-Ceiling 
When selected, the image will turn upside down.
   Rear-Ceiling 
When selected, the image will appear reversed in upside down 
position.
  Test Pattern
Display a test pattern. There are Grid, White pattern and None.
 Background Color
Use this feature to display a “Dark Blue”, “Gray”, or “Black” screen 
when no signal is available.  
System
Rear-Desktop and 
Rear-Ceiling are to be 
used with a translucent 
screen.
NoteNote      
						

							
User Controls
 Startup Image
Select the screen to display during startup.
 12V OUT A
12V OUT A provides a standard DC voltage for motorized screens.
 12V OUT B
 Off: disables the OUT.
 On: enables the OUT and the programmable sub-menu. The 
sub-menu is accessed by selecting the ON option then   
pressing the ENTER button on the remote control. Checking an 
option in the sub-menu will activate the OUT when the selected 
display mode is selected. In the example below 16:9 has been 
selected – this means that OUT B will be active when the   
projector display mode is set to 16:9. The OUT will be inactive 
for all the other display mode options.      
						

							English

User Controls
 Auto235: When AUTO235 is enabled the projector will  
automatically detect when a 2.35:1 ratio presentation is being 
shown and will activate the trigger on this port which, in turn, 
can be used to activate a motorised anamorphic lens   
assembly. The AUTO235 setting and a motorized anamorphic 
lens assembly can be used in this way to provide a fully   
automated “Constant Height” projection system.      
						

							
User Controls
 Lamp Hour
Display the cumulative lamp operating time.
 Lamp Reminder
Choose this function to show or to hide the warning message 
when the changing lamp message is displayed. The message will 
appear up 30 hours before suggested replacement of lamp.
 Brightness Mode
Choose “Bright” to increase the lamp brightness. Choose “STD” to 
return to normal mode.
 Lamp Reset
Reset the lamp life hour after replacing the lamp.
System | Lamp 
Settings      
						

							English
39
User Controls
	 Image
Select	the	screen	to	display	during	startup.
	Default	—	the	supplied	default	startup	screen.
	User	—	customized	screen	capture	using	the	Image	Capture	
function.
	 Image	Capture
Capture	a	displayed	screen	to	use	as	the	startup	screen.
1.	Display	the	desired	screen	on	the	projector.
2.	Select	Image	Capture	from	the	Advanced	menu.
3.	Select	OK.	Screen	capture	in	progress	will	display.	
When finished, Screen capture Succeeded will display.	
The	captured	screen	is	saved	as	User	in	the	Image	menu.
System | Startup  Image
Startup	Capture		support	in:	HDMI	720p/1080p	VGA	1920X1080@60Hz		YPbPr	720p/1080p
NoteNote      
						

							0
User Controls
 Language
Choose the multilingual OSD menu. Press  or   into the sub 
menu and then use the   or  key to select your preferred  
language. Press “Select (Enter)” to finalize the selection.
  Input Filter
Enable the input filter. Press  or   into the next menu as below 
and then use  or  to select. Press “Select (Enter)” to finalize 
the selection. The projector will not search inputs that are   
de-selected.
Setup