Optoma Projector HD50 User Manual

11
Remote Control
1.Power On
2.DynamicBlack
3.PureEngine
4.Gamma
5.HDMI Link
6.Brightness
7.Contrast
8.Mode
9.Source / ◄
10.Menu
11.HDMI1
12.HDMI2
13.VGA
14.4:3
15.16:9
16.Power Off
17.Color Temp
18.Color
19.Depth
20.3D Format
21.Keystone + / ▲
22.Re-sync / ►
23.Enter
24.Keystone - / ▼
25.YPbPr
26.Video
27.Native
28.LBX




























English  
\034
English   

12
Installation
Connecting the Projector
Connect to Notebook
1.................................DVI/HDMI Cable (Optional Accessory)
2........................................HDMI Cable (Optional Accessory)
3.................................VGA Input Cable (Optional Accessory)
4...........................................................................Power Cord
5.......................................RS232 Cable (Optional Accessory)
NoteNote
Due to the 
difference in 
applications for 
each country, 
some...

13
Connect to Video Sources
Video Output
DVD player, Set top Bo x
HD TV receive r
DVD player, Set top Bo x
HD TV receiver
E62405SPR
3
76
2
4
3D Adapter
1
5
1....................................3D Sync Cable (Optional Accessory) 
2........................................HDMI Cable (Optional Accessory)
3............SCART RGB/S-Video Adapter (Optional Accessory)
4......RCA Component Cable for YPbPr (Optional Accessory)
5...........................USB Power Charger (Optional Accessory)...

14
Powering On/Off the Projector
Powering On the Projector
1. Connect the power cord to the projector.
2. Turn On the connected devices.
3. Ensure the Power LED is flashing and then press the 
power button to turn On the projector.
The projector’s startup logo screen displays and connected 
devices are detected. If the connected device is a laptop, 
press the appropriate keys on the computer keyboard to 
switch the display output to the projector. (Check the user 
manual of the laptop to determine the...

15
Warning Indicator
▀■ When the Lamp LED indicator lights red, the projector will 
automatically shut itself down. Please contact your local 
reseller or service center. See page 54.
▀■ When the Temp LED is on a steady (not flashing) red, the 
projector will automatically shut itself down. Under normal 
conditions, the projector can be switched on again after it 
has cooled down. If the problem persists, you should contact 
your local dealer or our service center. See page 54.
Powering Off the...

16
Adjusting the Projected Image
Adjusting the Projector’s Height
The projector is equipped with tilt-adjuster feet for  
adjusting the image height.
 To adjust the angle of the picture, turn the tilt-adjuster right 
or left until the desired angle has been achieved.
 
Adjusting the vertical image position
The Lens Shift function can be used to adjust the  
position of the vertically.
Down
UP
Lens shift adjustment for 1080P
The display 
position can be 
shifted upward up 
to 9% and down 
to 5% elevation...

17
Diagonal 
length (inch) 
size of 16:9 
Screen
Screen Size W X H (16:9)Projection distance (D)Offset (A)(m)(feet)(m)(feet)
WidthHeightWidthHeightwidetelewidetele(m)(feet)
300.66 0.37 2.18 1.23 0.92 1.393.03 4.550.06 0.18 
40 0.89 0.50 2.91 1.63 1.23 1.854.04 6.070.07 0.25 
60 1.33 0.75 4.36 2.45 1.85 2.786.06 9.110.11 0.37 
80 1.77 1.00 5.81 3.27 2.46 3.708.08 12.14 0.15 0.49 
100 2.21 1.25 7.26 4.09 3.08 4.6310.10  15.18 0.19 0.61 
120 2.66 1.49 8.72 4.90 3.69 5.5512.11  18.22 0.22 0.74 
140 3.10 1.74...

18
User Controls
Remote Control
NoteNote
Due to the 
difference in 
applications for 
each country, 
some regions may 
have different 
accessories.
Using the Remote Control
Power On/Off
Refer to the “Powering Off the Projector” on 
page 15.
Refer to the “Powering On the Projector” on 
page 14.
PureEngine
The PureEngine is a collection of advanced 
image processing technologies that enhances 
the quality of the displayed image.
 Color 
TempRefer to the “Color Temp.” on page 30.
 GammaSet up gamma curve...

19
Using the Remote Control
 EnterConfirm your item selection.
Re-sync / ►
1. Automatically synchronizes the projector to 
the input source.
2. Navigates and changes settings in the 
OSD.
Keystone - / 
▼
1. Adjust the image Keystone negatively.
2. Navigates and changes settings in the 
OSD.
 Menu
Press “Menu” to launch the on-screen display 
(OSD) menu. To exit OSD, press “Menu” 
again.
HDMI 1Press “HDMI 1” to choose source from HDMI 1 
connector.
HDMI 2Press “HDMI 2” to choose source from HDMI 2...

20
On-screen Display Menus
The Projector has multilingual On-screen Display menus 
that allow you to make image adjustments and change a 
variety of settings. The projector will automatically detect 
the source.
How to operate
1. To open the OSD menu, press “Menu” on the Remote 
Control or Control Panel.
2. When OSD is displayed, use ▲ or ▼ keys to select any 
item in the main menu. While making a selection on a 
particular page, press ◄ or ► or “ENTER” key on the 
Remote Control or “Enter” on the...