Optoma Projector HD50 User Manual

							1
Table of contents
Table of contents ................................................................1
Usage Notice ......................................................................3
Safety Information ...................................................................3
Precautions ........................................................................\
......5
Eye Safety Warnings ...............................................................7
Introduction .........................................................................8
Package Overview ...................................................................8
Standard Accessories ..................................................................8
Optional Accessories ...................................................................8
Product Overview  ....................................................................9
Main Unit ......................................................................................9
Connection Ports........................................................................10
Remote Control ..........................................................................11
Installation .........................................................................12
Connecting the Projector .......................................................12
Connect to Notebook .................................................................12
Connect to Video Sources .........................................................13
Powering On/Off the Projector ...............................................14
Powering On the Projector  .........................................................14
Powering Off the Projector  .........................................................15
Warning Indicator .......................................................................15
Adjusting the Projected Image ...............................................16
Adjusting the Projector’s Height .................................................16
Adjusting the vertical image position ..........................................16
Adjusting Projection Image Size (1080p) ...................................17
User Controls  ....................................................................18
Remote Control .....................................................................18
On-screen Display Menus .....................................................20
How to operate ...........................................................................20
Menu Tree  ........................................................................\
.....21
Image .........................................................................................25
Image | Advanced ......................................................................27
Image | Advanced | PureEngine ................................................29
Image | Advanced | Color Settings .............................................30
Display .......................................................................................32
English    
						

							2
Display | 3D ................................................................................38
System
 .......................................................................................40
System | Lamp Setting
 ...............................................................42
Setup
 ..........................................................................................44
Setup | Language
 .......................................................................46
Setup | Input Source
 ..................................................................47
Setup | HDMI Link Settings
 ........................................................48
Setup | Signal (VGA/Component)
 ..............................................49
Setup | Signal (Video)
 ................................................................50
Setup | Advanced
 .......................................................................51
Appendices .......................................................................52
Troubleshooting .....................................................................52
Image .........................................................................................52
Other
 ..........................................................................................53
Projector LED Status Indicator
 ...................................................54
Remote Control
 ..........................................................................55
Replacing the Lamp ...............................................................56
Compatibility Modes
 ..............................................................59
Video Compatibility ....................................................................59
Video Timing Detail Describe
 .....................................................59
Computer Compatibility - VESA standards
 ................................60
Input Signal for HDMI/DVI-D
 ......................................................61
True 3D Video Compatibility table ..............................................62
RS232 Commands and Protocol Function List ......................63
RS232 Pin Assignments (projector side) ...................................63
RS232 Protocol Function List ..................................................... 64
Trademarks ........................................................................\
...80
Ceiling Mount Installation
 ......................................................81
Optoma Global Offices
 ..........................................................82
Regulation & Safety Notices
 ..................................................84 Ver.: 2  
\037   
						

							3
Usage Notice
Safety Information
The lightning flash with arrow head within an 
equilateral triangle is intended to alert the user to 
the presence of uninsulated “dangerous voltage” 
within the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of electric 
shock to persons.
The exclamation point within an equilateral triangle 
is intended to alert the user to the presence of 
important operating and maintenance (servicing) 
instructions in the literature accompanying the 
appliance.
 WARNING: TO REDUCE THE RISK OF FIRE OR 
ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE 
TO RAIN OR MOISTURE. DANGEROUS HIGH 
VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. 
DO NOT OPEN THE CABINET. REFER SERVICING TO 
QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the 
Canadian Interference-Causing Equipment Regulations.
Important Safety Instruction
  1.  Do not block any ventilation openings. To ensure reliable 
operation of the projector and to protect from over heating, 
it is recommended to install the projector in a location that 
does not block ventilation. As an example, do not place the 
projector on a crowded coffee table, sofa, bed, etc. Do not 
put the projector in an enclosure such as a book case or a 
cabinet that restricts air flow.
  2. Do not use the projector near water or moisture. To reduce 
the risk of fire and/or electric shock, do not expose the 
projector to rain or moisture.
  3. Do not install near heat sources such as radiators, heaters, 
stoves or any other apparatus such as amplifiers that emits 
heat.
  4. Clean only with dry cloth.
English    
						

							4
  5. Only use attachments/accessories specified by the manu-
facturer.
  6. Do not use the unit if it has been physically damaged or 
abused. 
Physical damage/abuse would be (but not limited to):
▀■ Unit has been dropped.
▀■ Power supply cord or plug has been damaged.
▀■ Liquid has been spilled on to the projector.
▀■ Projector has been exposed to rain or moisture.
▀■ Something has fallen in the projector or something is 
loose inside.
Do not attempt to service the unit yourself. Opening or 
removing covers may expose you to dangerous voltages or 
other hazards. Please call Optoma before you send the unit 
for repair.
  7. Do not let objects or liquids enter the projector. They may 
touch dangerous voltage points and short out parts that 
could result in fire or electric shock.
  8. See projector enclosure for safety related markings.
  9. The unit should only be repaired by appropriate service 
personnel.   
\036   
						

							5
Precautions
 
Please follow all warnings, precautions and  
maintenance as recommended in this user’s 
guide.
▀■ Warning-Do not look into the projector's lens when 
the lamp is on. The bright light may hurt your 
eyes.
▀■ Warning-To reduce the risk of fire or electric shock, do 
not expose this projector to rain or moisture.
▀■ Warning-Please do not open or disassemble the  
projector as this may cause electric shock.
▀■ Warning-When replacing the lamp, please allow the 
unit to cool down. Follow instructions as de-
scribed on page 56.
▀■ Warning-This projector will detect the life of the lamp  
itself. Please be sure to change the lamp 
when it shows warning messages.
▀■ Warning-Reset the "Lamp Reset" function from the  
on-screen display "System|Lamp Setting" 
menu after replacing the lamp module  
(refer to pages 42-43).
▀■ Warning-When switching the projector off, please 
ensure the cooling cycle has been completed 
before disconnecting power. Allow 90 sec-
onds for the projector to cool down.
▀■ Warning-Do not use lens cap when projector is in 
operation.
▀■ Warning-When the lamp is approaching to the end of 
its life time, the message "Replacement sug-
gested" will show on the screen.  
Please contact your local reseller or service 
center to change the lamp as soon as pos-
sible.
NoteNote
When the lamp 
reaches the end 
of its life, the 
projector will not 
turn back on until 
the lamp module 
has been replaced. 
To replace the 
lamp, follow the 
procedures listed 
under "Replacing 
the Lamp" section 
on page 56.
English  
sage otice
English    
						

							6
  Do:
▀■   Turn off and unplug the power plug from the AC outlet 
before cleaning the product.
▀■   Use a soft dry cloth with mild detergent to clean the 
display housing.
▀■   Disconnect the power plug from AC outlet if the product 
is not being used for a long period of time.
  Do not:
▀■   Block the slots and openings on the unit provided for  
ventilation.
▀■   Use abrasive cleaners, waxes or solvents to clean the 
unit.
▀■   Use under the following conditions:
   - In extremely hot, cold or humid environments.
    
Ensure that the ambient room temperature is  
within 5 - 40°C
    
Relative Humidity is 10 - 85% (Max.),  
non-condensing
-   In areas susceptible to excessive dust and dirt.
-   Near any appliance generating a strong magnetic 
field.
-   In direct sunlight.
NoteNote
Keep this 
manual for future 
reference.   
sage otice   
						

							7
Eye Safety Warnings
 
▀■ Avoid staring/facing directly into the projector beam at 
all times. Keep your back to the beam as much as  
possible.
▀■ When projector is used in a classroom, adequately 
supervise students when they are asked to point out 
something on the screen.
▀■ In order to minimize the lamp power, use room blinds 
to reduce ambient light levels.
English  
\036
English   
						

							8
Introduction
Package Overview
Unpack and inspect the box contents to ensure all parts 
listed below are in the box. If something is missing, 
please contact Optoma customer service.
Standard Accessories
ProjectorPower Cord 1.8m
Remote Control2 x AAA Batteries
Optional Accessories
Carrying CaseLens Cap
HDMIHDMI
VGA CableHDMI Cable
NoteNote
Optional 
accessories 
vary depending 
on model, 
specification and 
region.
Documentation:
	User's Manual
	Warranty Card
 		Quick Start 
Guide      
						

							9
Product Overview
Main Unit
10
9
8
7
6
5
4
3
2
1
1.IR Receiver
2.Tilt-Adjustment Feet
3.Function Keys
4.LED Indicators
5.Power Button
6.LENS SHIFT
7.Zoom
8.Focus
9.Lens
10.Connection Ports
English  
ntroduction
English   
						

							10
Connection Ports
1211
10987654321
1.Power Socket
2.3D Sync Out (5V) connector
3.HDMI 2 Connector (v1.4a 3D supported)
4.HDMI 1 Connector (v1.4a 3D supported)
5.USB for firmware upgrad
6.VGA-IN/YPbPr/ 
7.RS-232 Connector (9-pin)
8.Component Video Input Connector (YPbPr)
9.USB for Power ([email protected])
10.Kensington Lock Port
11.Composite Video Input Connector
12.12V OUT (12V, 500mA, 3.5mm mini jack)   
ntroduction