Home > Optoma > Projector > Optoma Projector Ex525st User Manual

Optoma Projector Ex525st User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Optoma Projector Ex525st User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    2English
    
     User Controls
    
    The Projector has multilingual On-screen Display menus 
    that allow you to make image adjustments and change a 
    variety of settings. The projector will automatically detect 
    the source. 
    How to operate 
    1.  To open the OSD menu, press “Menu” on the Remote Control or 
    Projector Keypad.
    2  When OSD is displayed, use   keys to select any item in the 
    main menu. While making a selection on a particular page, press 
     or “Enter” key to enter sub menu.
    3. Use   keys to select the desired item and adjust the settings 
    by   key.
    4.  Select the next item to be adjusted in the sub menu and adjust as 
    described above.
    5. Press “Enter” to confi  rm, and the screen will return to the main 
    menu.
    6.  To exit, press “Menu” again. The OSD menu will close and the 
    projector will automatically save the new settings.
     On-screen Display Menus
    Main Menu
    Sub Menu
    Setting 
    						
    							
    22English
    
    User Controls
    
    Menu Tree
    	(*) “Signal” menu is only supported in Analog VGA (RGB) signal.* 
    						
    							
    23English
    
     User Controls
    
    Image
      Display Mode
    There are many factory presets optimized for various types of 
    images.
     Presentation: Good color and brightness from PC input.
     Bright: Maximum brightness from PC input.
     Movie: For home theater.
     sRGB: Standardised accurate color.
     Blackboard: This mode should be selected to achieve optimum 
    color settings when projecting onto a blackboard (green).
     Classroom: This mode is recommended for projecting in a 
    classroom.
     User: User’s own settings.
      Brightness
    Adjust the brightness of the image.
      Press the  to darken image.
      Press the  to lighten the image.
      Contrast
    The contrast controls the degree of difference between the lightest 
    and darkest parts of the picture. Adjusting the contrast changes the 
    amount of black and white in the image.
      Press the  to decrease the contrast.
      Press the  to increase the contrast. 
    						
    							
    24English
    
    User Controls
    
      Color
    Select  the  Red/Green/Blue  Gain  for  brightness  adjustments  and 
    Bias  for  contrast  adjustments  for  the  whole  picture.  Individual 
    color adjustments for Cyan, Magenta, Yellow can also be adjusted.
      Reset
    Choose “Yes” to return the factory default settings for color adjustments.
    Image | Color
    Image
      Sharpness 
    Adjust the sharpness of the image.
      Press the  to decrease the sharpness.
      Press the  to increase the sharpness.  
    						
    							
    25English
    
    User Controls
    
    Image | Advanced
     Degamma
    This allows you to choose a degamma table that has been  
    fine-tuned to bring out the best image quality for the input.
      Film: for home theater.
      Video: for video or TV source.
      Graphics: for image source.
      PC: for PC or computer source.
      White Peaking
    This adjustable item utilizes a new color-processing algorithm and 
    system level enhancements to enable higher brightness while  
    providing true, more vibrant colors in picture. The range is from 
    “0” to “10”. If you prefer a stronger enhanced image, adjust  
    toward the maximum setting. For a smoother, more natural image, 
    adjust toward the minimum setting.
     Color Temp.
    Adjust the color temperature. With cold temperature, the screen 
    looks colder; with warm temperature, the screen looks warmer. 
     Color Space
    Select an appropriate color matrix type from AUTO, RGB or YUV. 
    						
    							
    26English
    
    User Controls
    
    Image | Advanced
      Input Source
    Enable input sources. Press “” into the next menu as below and 
    then use  or  to select. Press “Enter” to fi  nalize the selection. 
    The projector will not search inputs that are de-selected. 
    						
    							
    27English
    
    User Controls
    
    Display
     Format
    Use this function to choose your desired aspect ratio.
      4:3: This format is for 4x3 input sources not enhanced for Wide 
    screen TV.
      16:9 I: This format is for 16x9 input sources, like HDTV and 
    DVD enhanced for Wide screen TV. (Better format: 576i/p)
      16:9 II: This format is for 16x9 input sources, like HDTV and 
    DVD enhanced for Wide screen TV. (Better format: 480i/p)
      Window: When a 4:3 image is bigger than a 16:9 screen, select 
    the “Window” mode to fit the image onto the screen without 
    changing the projection distance.
      AUTO: Automatically selects the appropriate display format.
    Source480i/p576i/p720p1080iPC
    4:3Scale to 1024 x 768
    16:9 IScale to 1024 x 576
    16:9 IIScale to   854 x 480
    WindowScale to   768 x 576 
    						
    							
    28English
    
    User Controls
    
    window format
    LBX     format
    16:9-I   formator
    or16:9-II  format
    4:3     format
    
    Input Signal
    Display area
    Picture area
    Display on Screen 
    						
    							
    29English
    
     User Controls
    
      Overscan
    Overscan  function  removes  the  noise  in  a  video  image.  Overscan the  image  to  remove  video  encoding  noise  on  the  edge  of  video 
    source.
      Zoom
      Press the  to reduce the size of an image.
      Press the  to magnify an image on the projection screen.
      H Image Shift
    Shift the projected image position horizontally.  
      V Image Shift
    Shift the projected image position vertically. 
     V Keystone
    Press the  or  to adjust image distortion vertically and makes a 
    squarer image. 
    Display 
    						
    							
    30English
    
    User Controls
    
      Language
    Choose the multilingual OSD menu. Press  or  into the sub 
    menu and then use the  or  key to select your preferred 
    language. Press “Enter” to fi  nalize the selection. 
    Setup | Language 
    						
    All Optoma manuals Comments (0)

    Related Manuals for Optoma Projector Ex525st User Manual