Optoma Projector Ex525st User Manual

2English

 User Controls

The Projector has multilingual On-screen Display menus 
that allow you to make image adjustments and change a 
variety of settings. The projector will automatically detect 
the source. 
How to operate 
1.  To open the OSD menu, press “Menu” on the Remote Control or 
Projector Keypad.
2  When OSD is displayed, use   keys to select any item in the 
main menu. While making a selection on a particular page, press 
 or “Enter” key to enter sub menu.
3. Use   keys to select the...

22English

User Controls

Menu Tree
	(*) “Signal” menu is only supported in Analog VGA (RGB) signal.* 

23English

 User Controls

Image
  Display Mode
There are many factory presets optimized for various types of 
images.
 Presentation: Good color and brightness from PC input.
 Bright: Maximum brightness from PC input.
 Movie: For home theater.
 sRGB: Standardised accurate color.
 Blackboard: This mode should be selected to achieve optimum 
color settings when projecting onto a blackboard (green).
 Classroom: This mode is recommended for projecting in a 
classroom.
 User: User’s own settings....

24English

User Controls

  Color
Select  the  Red/Green/Blue  Gain  for  brightness  adjustments  and 
Bias  for  contrast  adjustments  for  the  whole  picture.  Individual 
color adjustments for Cyan, Magenta, Yellow can also be adjusted.
  Reset
Choose “Yes” to return the factory default settings for color adjustments.
Image | Color
Image
  Sharpness 
Adjust the sharpness of the image.
  Press the  to decrease the sharpness.
  Press the  to increase the sharpness.  

25English

User Controls

Image | Advanced
 Degamma
This allows you to choose a degamma table that has been  
fine-tuned to bring out the best image quality for the input.
  Film: for home theater.
  Video: for video or TV source.
  Graphics: for image source.
  PC: for PC or computer source.
  White Peaking
This adjustable item utilizes a new color-processing algorithm and 
system level enhancements to enable higher brightness while  
providing true, more vibrant colors in picture. The range is...

26English

User Controls

Image | Advanced
  Input Source
Enable input sources. Press “” into the next menu as below and 
then use  or  to select. Press “Enter” to fi  nalize the selection. 
The projector will not search inputs that are de-selected. 

27English

User Controls

Display
 Format
Use this function to choose your desired aspect ratio.
  4:3: This format is for 4x3 input sources not enhanced for Wide 
screen TV.
  16:9 I: This format is for 16x9 input sources, like HDTV and 
DVD enhanced for Wide screen TV. (Better format: 576i/p)
  16:9 II: This format is for 16x9 input sources, like HDTV and 
DVD enhanced for Wide screen TV. (Better format: 480i/p)
  Window: When a 4:3 image is bigger than a 16:9 screen, select 
the “Window” mode to...

28English

User Controls

window format
LBX     format
16:9-I   formator
or16:9-II  format
4:3     format

Input Signal
Display area
Picture area
Display on Screen 

29English

 User Controls

  Overscan
Overscan  function  removes  the  noise  in  a  video  image.  Overscan the  image  to  remove  video  encoding  noise  on  the  edge  of  video 
source.
  Zoom
  Press the  to reduce the size of an image.
  Press the  to magnify an image on the projection screen.
  H Image Shift
Shift the projected image position horizontally.  
  V Image Shift
Shift the projected image position vertically. 
 V Keystone
Press the  or  to adjust image distortion vertically and...

30English

User Controls

  Language
Choose the multilingual OSD menu. Press  or  into the sub 
menu and then use the  or  key to select your preferred 
language. Press “Enter” to fi  nalize the selection. 
Setup | Language