Home > Optoma > Projector > Optoma Projector Ew762 User Manual

Optoma Projector Ew762 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Optoma Projector Ew762 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							51English
    Appendices
     Image is out of focus
     Make sure the lens cap is removed.
     Adjust the Focus Ring on the projector lens. 
     Make sure the projection screen is between the required distance. 
    See page 16.
     The image is stretched when displaying 16:9 DVD title
     When you play anamorphic DVD or 16:9 DVD, the projector will 
    show the best image when the projector display mode is set to 
    16:9 in the OSD.
     If you play 4:3 format DVD titles, please change the format to 4:3 
    in the projector OSD.
     If the image is still stretched, you will also need to adjust the 
    aspect ratio by referring to the following:
     Please setup the display format as 16:9 (wide) aspect ratio type 
    on your DVD player.
     Image is too small or too large
     Move the projector closer to or further from the screen.
     Press “Menu” button on the remote control or projector panel, go 
    to “DISPLAY  Format” and try the different settings.
     Image has slanted sides
     If possible, reposition the projector so that it is horizontally 
    centered on the screen and below the bottom of the screen.
     Press “Keystone +/-” button on the remote control or press  
    “ / ” on the projector panel, until the sides are vertical.
     Image is reversed
     Select “SETUP  Projection” from the OSD and adjust the  
    projection direction.
    	Use of Keystone is not recom-mended. 
    						
    							52English
    Appendices
     The projector stops responding to all controls
     If possible, turn off the projector, then unplug the power cord and 
    wait at least 60 seconds before reconnecting power.
     Check that “Keypad Lock” is not activated by trying to control the 
    projector with the remote control.
     Lamp burns out or makes a popping sound
     When the lamp reaches its end of life, it will burn out and may 
    make a loud popping sound. If this happens, the projector will not 
    turn on until the lamp module has been replaced. To replace the 
    lamp, follow the procedures in the “Replacing the Lamp” section on 
    pages 54-55.
     LED lighting message
    Steady light    
    No light  
    MessagePOWER/STAND-BY LEDTemp-LEDLamp-LED
    (Green/Amber)(Red)(Red)
    Standby State
    (Input power cord)Amber
    Power on (Warming)Flashing Green
    Lamp lightingGreen
    Power off (Cooling) Flashing Green
    Error (Over Temp.)Flashing Amber
    Error (Fan fail)Flashing AmberFlashing
    Error (Lamp fail)Flashing Amber
    *  POWER/STANDBY LED be ON when OSD appears, be OFF when OSD disappears.                    
    						
    							53English
    Appendices
     On Screen Messages 
     Temperature warning:
     
     Fan failed:
     
     Lamp warning:
     
     Out of display range:
     
     If the remote control does not work
     Check the operating angle of the remote control is within ±15° both horizontally and vertically of one of the IR receivers on the projector.
     Make sure there are not any obstructions between the remote control and the projector. Move to within 7 m (±0°) of the projector.
     Make sure the batteries are inserted correctly.
     Replace batteries if they are exhausted. 
    						
    							54English
    Appendices
    Replacing the lamp
    The projector automatically detects the lamp life. When the 
    lamp life is nearing the end of use, you will receive a warning 
    message.
    When you see this message, please contact your local reseller 
    or service center to change the lamp as soon as possible. 
    Make sure the projector has been cooled down for at least 30 
    minutes before changing the lamp. 
     Warning: Lamp compartment may be hot! Allow it to cool 
    down before changing the lamp!
     Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shat-ter and cause injury if it is dropped.
     Warning: If ceiling mounted, please use caution when  
    opening the lamp access panel. It is recommended to wear 
    safety glasses if changing the bulb when ceiling mounted. 
    “Caution must be used to prevent any loose parts from fall-
    ing out of projector.”  
    						
    							55English
    Appendices
    Lamp Replacement Procedure:
    1. Switch off the power to the projector by pressing the “” button. 
    2. Allow the projector to cool down for at least 30 minutes.
    3. Disconnect the power cord.
    4. Unscrew the two screws on the cover. 1
    5. Lift up and remove the cover. 2
    6. Unscrew the two screws on the lamp module. 3
    7. Lift up the lamp handle and remove the lamp module slowly and carefully . 4
    To replace the lamp module, reverse the previous steps.
    8.  Turn on the projector and use “Lamp Reset” after the lamp module is  
    replaced.
    Lamp Reset: (i) Press “Menu”  (ii) Select “OPTIONS”  (iii) Select  “Lamp Settings”  (iv) Select “Lamp Reset”  (v) Select “Yes”.
    	The screws on the lamp cover and the lamp cannot be removed.  	The projector cannot be turned on if the lamp cover has not been 
    placed back on the projector.  	Do not touch the glass area of the lamp. Hand oil can cause the lamp to shatter. Use a dry cloth to clean the lamp module if it was accidentally touched.
    1
    2
    3
    4  
    						
    							56English
    Appendices
    	For widescreen resolution (WXGA), the compatibility support is dependent on Notebook/PC models.
    	120Hz input signals may be dependent on graphics cards support.
    	Please note that using resolutions other than native 1024 x 768 (XGA model), 1280 x 800 (WXGA model) may result 
    in some loss of image clarity.
    Compatibility Modes
    Computer Compatibility 
    ModeResolutionAnglog/Digital
    V-Sync (Hz)H-Sync (KHz)
    VGA640 × 3507031.50
    VGA640 × 3508537.90
    VGA640 × 4008537.90
    VGA640 × 4806031.50
    VGA640 × 48067-
    VGA640 × 4807237.90
    VGA640 × 4807537.50
    VGA720 × 4007031.50
    VGA720 × 4008537.90
    SVGA800 × 6005635.20
    SVGA800 × 6006037.90
    SVGA800 × 6007248.10
    SVGA800 × 6007546.90
    SVGA800 × 600120-
    832 × 62475-
    XGA1024 × 7686048.40
    XGA1024 × 7687056.50
    XGA1024 × 7687560.00
    XGA1024 × 768120-
    1152 × 87075-
    HD1280 x 7206045.00
    HD1280 x 720120-
    WXGA-8001280 x 80060-
    SXGA1280 x 10246064.00
    1366 x 76860-
    1440 x 9006055.935
    SXGA+1400 x 105060-
    UXGA1600 × 12006075.00
    1680 x 105060-
    HDTV1920 x 10803033.80 
    						
    							57English
    Appendices
    Video Compatibility
    Computer Compatibility
    ModeResolutionV-Sync (Hz)H-Sync (KHz)
    MAC LC 13”640 × 48066.6634.98
    MAC II 13”640 × 48066.6835.00
    MAC 16”832 × 62474.5549.73
    MAC 19”1024 × 7687560.24
    MAC1152 × 87075.0668.68
    MAC G4640 × 4806031.35
    i MAC DV1024 × 7687560.00
    i MAC DV1152 × 8707568.49
    NTSCM (3.58MHz), 4.43 MHz
    PALB, D, G, H, I, M, N
    SECAMB, D, G, K, K1, L
    SDTV480i/p@60Hz, 576i/p@50Hz 
    HDTV720p@50Hz/60Hz, 1080i@50Hz/60Hz, 
    1080p@24Hz/25Hz/30Hz/50Hz/60Hz
     
      
    						
    							58English
    Appendices
    RS232 Pin Assignments
    RS232 Commands and Protocol 
    Function List
    	RS232 shell is grounded.
    Pin no.Spec.  (from projector side)
    1N/A
    2RXD
    3TXD
    4N/A
    5GND
    6N/A
    7N/A
    8N/A
    9N/A
    1
    2
    3
    4
    5
    6
    7
    8
    9   
    						
    							59English
    Appendices
    RS232 Protocol Function List
    Baud Rate : 9600
    Data Bits: 8
    Parity: None
    Stop Bits: 1 
    Flow Control : None
    UART16550 FIFO: Disable
    Projector Return (Pass): P
    Projector Return (Fail): F 
    1.  
    There is a  after all ASCII commands. 2.   0D is the HEX code for  in ASCII code.
    XX=00-99, projector's ID,
    XX=00 is for all projectors  
    Optoma EW762 RS232 Command Table. ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    Baud Rate : 9600               Note :  There is a  after all ASCII commands
    Data Bits: 8              0D is the HEX code for  in ASCII code
    Parity: None
    Stop Bits: 1
    Flow Control : None
    UART16550 FIFO: Disable
    Projector Return (Pass): P                 
    Projector Return (Fail): F                 XX=01À99, projector's ID, XX=00 is for all projectors
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    SEND to projector                  
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    232 ASCII CodeHEX CodeFunctionDescription---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    ~XX00 1 7E 30 30 30 30 20 31 0D Power ON
    ~XX00 0 7E 30 30 30 30 20 30 0D Power OFF (0/2 for backward compatible)
    ~XX00 1 ~nnnn 7E 30 30 30 30 20 31 20 a 0D Power ON with Password ~nnnn = ~0000 (a=7E 30 30 30 30)
      ~9999 (a=7E 39 39 39 39)
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    ~XX01 1 7E 30 30 30 31 20 31 0D Resync
    ~XX02 1 7E 30 30 30 32 20 31 0D AV Mute On
    ~XX02 0 7E 30 30 30 32 20 30 0D Off (0/2 for backward compatible)
    ~XX03 1 7E 30 30 30 33 20 31 0D Mute On
    ~XX03 0 7E 30 30 30 33 20 30 0D Off (0/2 for backward compatible)
    ~XX04 1 7E 30 30 30 34 20 31 0D Freeze
    ~XX04 0 7E 30 30 30 34 20 30 0D Unfreeze (0/2 for backward compatible)
    ~XX05 1 7E 30 30 30 35 20 31 0D Zoom Plus
    ~XX06 1 7E 30 30 30 36 20 31 0D Zoom Minus
    ~XX12 1 7E 30 30 31 32 20 31 0D Direct Source Commands HDMI
    ~XX12 5 7E 30 30 31 32 20 35 0D VGA 1
    ~XX12 6 7E 30 30 31 32 20 36 0D VGA 2
    ~XX12 8 7E 30 30 31 32 20 38 0D VGA 1 Component
    ~XX12 9 7E 30 30 31 32 20 39 0D S-Video
    ~XX12 10 7E 30 30 31 32 20 31 30 0D Video
    ~XX12 12 7E 30 30 31 32 20 31 33 0D VGA 2 SCART
    ~XX12 13 7E 30 30 31 32 20 31 33 0D VGA 2 Component
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    ~XX20 1 7E 30 30 32 30 20 31 0D Display Mode        Presentation
    ~XX20 2 7E 30 30 32 30 20 32 0D Bright
    ~XX20 3 7E 30 30 32 30 20 33 0D Movie
    ~XX20 4 7E 30 30 32 30 20 34 0D sRGB
    ~XX20 5 7E 30 30 32 30 20 35 0D User 
    ~XX20 7 7E 30 30 32 30 20 37 0D Blackboard
    ~XX20 8 7E 30 30 32 30 20 38 0D Classroom
    ~XX20 9 7E 30 30 32 30 20 39 0D 3D
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    ~XX21 n 7E 30 30 32 31 20  a 0D Brightness n = 0 (a=30) ~ 100 (a=31 30 30)
    ~XX22 n 7E 30 30 32 32 20  a 0D Contrast n = 0 (a=30) ~ 100 (a=31 30 30)
    ~XX23 n 7E 30 30 32 33 20  a 0D Sharpness n = 0 (a=30) ~ 31  (a=33 31)
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    ~XX24 n  7E 30 30 32 34 20 a 0D  Color Settings Red Gain n = -50 (a=2D 35 30) ~ 50 (a=35 30)
    ~XX25 n 7E 30 30 32 35 20 a 0D  Green Gainn = -50 (a=2D 35 30) ~ 50 (a=35 30)
    ~XX26 n  7E 30 30 32 36 20 a 0D Blue Gain n = -50 (a=2D 35 30) ~ 50 (a=35 30)
    ~XX27 n  7E 30 30 32 37 20 a 0D  Red Biasn = -50 (a=2D 35 30) ~ 50 (a=35 30)
    ~XX28 n  7E 30 30 32 38 20 a 0D  Green Bias n = -50 (a=2D 35 30) ~ 50 (a=35 30)
    ~XX29 n  7E 30 30 32 39 20 a 0D  Blue Bias n = -50 (a=2D 35 30) ~ 50 (a=35 30)
    ~XX30 n  7E 30 30 33 30 20 a 0D  Cyan n = -50 (a=2D 35 30) ~ 50 (a=35 30)
    ~XX31 n  7E 30 30 33 31 20 a 0D  Yellow n = -50 (a=2D 35 30) ~ 50 (a=35 30)
    ~XX32 n  7E 30 30 33 32 20 a 0D  Magenta n = -50 (a=2D 35 30) ~ 50 (a=35 30)
    ~XX33 1  7E 30 30 33 33 20 31 0D Reset
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    ~XX34 n 7E 30 30 33 34 20 a 0D BrilliantColorTM n = 0 (a=30) ~ 10 (a=31 30)
    ~XX35 1 7E 30 30 33 35 20 31 0D Gamma Film
    ~XX35 2 7E 30 30 33 35 20 32 0D Video
    ~XX35 3 7E 30 30 33 35 20 33 0D Graphics
    ~XX35 4 7E 30 30 33 35 20 34 0D PC
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    ~XX36 1 7E 30 30 33 36 20 31 0D Color Temp. Warm
    ~XX36 2 7E 30 30 33 36 20 32 0D Medium
    ~XX36 3 7E 30 30 33 36 20 33 0D Cold
    ~XX37 1 7E 30 30 33 37 20 31 0D Color Space Auto
    ~XX37 2 7E 30 30 33 37 20 32 0D RGB
    ~XX37 3 7E 30 30 33 37 20 33 0D YUV
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    
    						
    							60English
    Appendices
    ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    ~XX44 n 7E 30 30 34 34 20  a 0D Color (Saturation) n = 0 (a=30) ~ 100 (a=31 30 30)
    ~XX45 n 7E 30 30 34 35 20  a 0D Tint n = 0 (a=30) ~ 100 (a=31 30 30)
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    ~XX60 1 7E 30 30 36 30 20 31 0D Format 4:3
    ~XX60 2 7E 30 30 36 30 20 32 0D 16:9/16:10
    ~XX60 5 7E 30 30 36 30 20 33 0D LBX
    ~XX60 6 7E 30 30 36 30 20 36 0D Native
    ~XX60 7 7E 30 30 36 30 20 37 0D Auto
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    ~XX61 n 7E 30 30 36 31 20 a 0D Edgemask  n = 0 (a=30) ~ 10 (a=31 30)
    ~XX62 n 7E 30 30 36 32 20 a 0D Zoom  n = -5 (a=2D 35) ~ 25 (a=32 35)  
    ~XX63 n 7E 30 30 36 33 20 a 0D H Image Shift  n = -50 (a=2D  35 30) ~ +50 (a=35 30)
    ~XX64 n 7E 30 30 36 34 20 a 0D V Image Shift  n = -50 (a=2D  35 30) ~ +50 (a=35 30)
    ~XX66 n 7E 30 30 36 36 20 a 0D V Keystone  n = -40 (a=2D 34 30) ~ 40 (a=34 30)
    ~XX230 3 7E 30 30 32 33 30 20 31 0D 3D Mode IR
    ~XX230 1 7E 30 30 32 33 30 20 31 0D 3D Mode DLP-Link
    ~XX230 0 7E 30 30 32 33 30 20 30 0D 3D Mode Off 
    ~XX231 1 7E 30 30 32 33 31 20 31 0D 3D Sync Invert On
    ~XX231 0 7E 30 30 32 33 31 20 30 0D 3D Sync Invert Off
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    ~XX70 1 7E 30 30 37 30 20 31 0D Language English 
    ~XX70 2 7E 30 30 37 30 20 32 0D German 
    ~XX70 3 7E 30 30 37 30 20 33 0D French 
    ~XX70 4 7E 30 30 37 30 20 34 0D Italian 
    ~XX70 5 7E 30 30 37 30 20 35 0D Spanish 
    ~XX70 6 7E 30 30 37 30 20 36 0D Portuguese 
    ~XX70 7 7E 30 30 37 30 20 37 0D Polish 
    ~XX70 8 7E 30 30 37 30 20 38 0D Dutch 
    ~XX70 9 7E 30 30 37 30 20 39 0D Swedish
    ~XX70 10 7E 30 30 37 30 20 31 30 0D Norwegian/Danish
    ~XX70 11 7E 30 30 37 30 20 31 31 0D Finnish 
    ~XX70 12 7E 30 30 37 30 20 31 32 0D Greek 
    ~XX70 13 7E 30 30 37 30 20 31 33 0D Traditional Chinese 
    ~XX70 14 7E 30 30 37 30 20 31 34 0D Simplified Chinese 
    ~XX70 15 7E 30 30 37 30 20 31 35 0D Japanese 
    ~XX70 16 7E 30 30 37 30 20 31 36 0D Korean 
    ~XX70 17 7E 30 30 37 30 20 31 37 0D Russian 
    ~XX70 18 7E 30 30 37 30 20 31 38 0D Hungarian
    ~XX70 19 7E 30 30 37 30 20 31 39 0D Czechoslovak
    ~XX70 20 7E 30 30 37 30 20 32 30 0D Arabic
    ~XX70 21 7E 30 30 37 30 20 32 31 0D Thai
    ~XX70 22 7E 30 30 37 30 20 32 32 0D Turkish
    ~XX70 23 7E 30 30 37 30 20 32 33 0D Farsi
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    ~XX71 1 7E 30 30 37 31 20 31 0D Projection Front-Desktop
    ~XX71 2 7E 30 30 37 31 20 32 0D Rear-Desktop
    ~XX71 3 7E 30 30 37 31 20 33 0D Front-Ceiling
    ~XX71 4 7E 30 30 37 31 20 34 0D Rear-Ceiling
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    ~XX72 1 7E 30 30 37 32 20 31 0D Menu Location Top Left
    ~XX72 2 7E 30 30 37 32 20 32 0D Top Right
    ~XX72 3 7E 30 30 37 32 20 33 0D Centre
    ~XX72 4 7E 30 30 37 32 20 34 0D Bottom Left
    ~XX72 5 7E 30 30 37 32 20 35 0D Bottom Right
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    ~XX90 1 7E 30 30 39 31 20 31 0D Screen Type  16:10
    ~XX90 0  7E 30 30 39 31 20 30 0D 16:9 
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    ~XX91 n  7E 30 30 39 31 20 a 0D Signal  Automaticn=0 Off; n=1 On
    ~XX73 n 7E 30 30 37 33 20 a 0D Frequencyn = -5 (a=2D 35) ~ 5 (a=35) By signal
    ~XX74 n 7E 30 30 37 34 20 a 0D Phase n = 0 (a=30) ~ 31 (a=33 31)  By signal
    ~XX75 n 7E 30 30 37 35 20 a 0D H. Positionn = -5 (a=2D 35) ~ 5 (a=35) By timing
    ~XX76 n 7E 30 30 37 36 20 a 0D V. Positionn = -5 (a=2D 35) ~ 5 (a=35) By timing
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    ~XX77 n 7E 30 30 37 37 20 aabbcc 0D Security Security Timer Month/Day/Hour n = mm/dd/hh        
    mm= 00 (aa=30 30) ~ 12 (aa=31 32) 
    dd = 00 (bb=30 30) ~ 30 (bb=33 30) 
    hh= 00 (cc=30 30) ~ 24 (cc=32 34)
    ~XX78 1 7E 30 30 37 38 20 31 0D Security Settings Enable 
    ~XX78 2 7E 30 30 37 38 20 32 0D Disable 
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    ~XX79 n 7E 30 30 37 39 20 a 0D Projector ID   n = 00 (a=30 30) ~ 99 (a=39 39)
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    ~XX80 1 7E 30 30 38 30 20 31 0D Mute On 
    ~XX80 0 7E 30 30 38 30 20 30 0D Off (0/2 for backward compatible)
    ~XX81 n 7E 30 30 38 31 20 a 0D Volume   n = 0 (a=30) ~ 10 (a=31 30)
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    ~XX82 1 7E 30 30 38 32 20 31 0D Logo Optoma
    ~XX82 2 7E 30 30 38 32 20 32 0D User
    ~XX82 3 7E 30 30 38 32 20 33 0D Neutral
    ~XX83 1 7E 30 30 38 33 20 31 0D Logo Capture (Option)
    ------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------
    
    						
    All Optoma manuals Comments (0)

    Related Manuals for Optoma Projector Ew762 User Manual