Optoma Hd86 Projector User Manual

English
21
Installation
	This graph is for user’s reference only.
Diagonal
length (inch) size  of 16:9 Screen Screen Size W X H (16:9) Projection distance (D)
Offset
(Hd)
(m) (feet) (m)(feet)
Width Height Width Height wide tele wide tele (m) (feet)
35 0.77  0.44  2.54  1.43  - 1.50  - 4.91  0.48  1.57 
45 1.00  0.56  3.27  1.84  1.53  1.92  5.03  6.31  0.62  2.02 
50 1.11  0.62  3.63  2.04  1.70  2.14  5.59  7.01  0.68  2.25 
60 1.33  0.75  4.36  2.45  2.05  2.56  6.71  8.41  0.82  2.70 
70 1.55  0.87...

22
Installation
Long throw projection lens: TR: Wide ― 1.93 Tele ― 2.89
Diagonal
length (inch) size  of 16:9 Screen Screen Size W X H (16:9) Projection distance (D)
Offset
(Hd)
(m) (feet) (m)(feet)
Width Height Width Height wide tele wide tele (m) (feet)
35 0.77  0.44  2.54  1.43  - 2.24  - 7.35  0.48  1.57 
45 1.00  0.56  3.27  1.84  - 2.88  - 9.45  0.62  2.02 
50 1.11  0.62  3.63  2.04  2.14  3.20  7.01  10.50  0.68  2.25 
60 1.33  0.75  4.36  2.45  2.56  3.84  8.41  12.59  0.82  2.70 
70 1.55  0.87...

English
23
User Controls
Using the Remote Control
Power On/Off
Refer to the “Power On the Projector” 
section on page 16.
 Refer to the “Power Off the Projector” 
section on page 17.
 BrightnessAdjust the brightness of the image.
 ContrastControl the degree of difference between 
the lightest and darkest parts of the 
picture.
PureEngineThe PureEngine is a collection of  
advanced image processing technologies 
that enhances the quality of the displayed 
image.
 DynamicBlackEnable the projector to...


User Controls
Edge MaskChoose “On” to mask off a few pixels on 
each edge of the image to be displayed. 
Use Edge Mask “On” if image source 
happens to have encoding error near any 
edge of the displayable image.
OnActivate the 12V OUT A output.
OffDeactivate the 12V OUT A output.
 4:3Scale the image at a 4:3 aspect ratio.
 Letter BoxEnable the viewing of the letterboxed 
nonanamorphically enhanced movie at 
full screen width. Part of the original  
image will be lost if the image aspect ratio...

English

User Controls
The Projector has multilingual On-screen Display menus 
that allow you to make image adjustments and change a 
variety of settings. The projector will automatically detect 
the source. 
How to operate 
1.   To open the OSD menu, press “Menu” on the Remote Control or 
Control Panel.
2    When OSD is displayed, use      keys to select any item in the 
main menu.  While making a selection on a particular page, press 
   or “Enter” key to enter sub menu.
3.   Use      keys to...

26
User Controls
Menu Tree      

English

User Controls
Image
 Display Mode
There are many factory presets optimized for various types of   
images.
  Cinema 1/Cinema 2: For home theater.
 Reference: This mode is intended to reproduce, as close as 
possible, the image the way the movie director intended. Color, 
color temperature, brightness, contrast and gamma settings are 
all configured to standard reference levels.
 Photo: Optimized for displaying photographic images.
 Bright: Optimized for maximum brightness.
...


User Controls
 Brightness
Adjust the brightness of the image.
 Press the  to darken image.
 Press the  to lighten the image.
 Color
Adjust a video image from black and white to fully saturated color .
 Press the  to decrease the color saturation in the image.
 Press the  to increase the color saturation in the image. 
  Tint 
Adjust the color balance of red and green.
 Press the  to increase the amount of green in the image.
 Press the  to increase the amount of red in the image....

English

User Controls
Image | Advanced
 Noise Reduction
The motion Adaptive Noise Reduction reduces the amount of   
visible noise in interlaced signals. The range is from “0” to “10”.  
(0:Off)
  Gamma
This allows you to set up gamma curve type. After the initial setup 
and fine tuning is completed, utilize the Gamma Adjustment steps 
to optimize your image output.
 Film: for home theater.
 Video: for video or TV source.
 Graphics: for image source.
 Standard: for standardized setting....

0
User Controls
 Lens IRIS
This adjustable item opens and closes the len’s iris. The range is 
from “1” to “9”.
 Color Settings
 Color Temperature: Adjust the color temperature. Cold   
temperature, the screen looks colder; with Warm temperature, 
the screen looks warmer.
 Color Gamut: Select this menu to optomize the color gamut 
color range for Native, DLP-C, HDTV, EBU or SMPTE-C.
 CMS: Select this menu to optimize Color Management   
Settings.
 RGB Gain/Bias: Press  into the next menu as...