Optoma Hd806 Projector User Manual

English
41
Appendices
Replacing the lamp
The projector automatically detects the lamp life.  When the lamp 
life is nearing the end of use, you will receive a warning message.
When you see this message, please contact your local reseller or 
service center to change the lamp as soon as possible. Make sure 
the projector has been cooled down for at least 30 minutes before 
changing the lamp. 
Warning: Lamp com-partment is hot!  Allow it to cool down before changing lamp!
Warning: To reduce the risk of...

42
Appendices
Remark :  “*”com-pressed computer image.
Compatibility Modes
NoteNote
ModeResolutionV.Frequency (Hz) AAnalogDigital
VESA SVGA800 x 60060
VESA SVGA800 x 60072
VESA SVGA800 x 60075
VESA XGA1024 x 76860
VESA XGA1024 x 76870
VESA XGA1024 x 76875
VESA XGA1024 x 76885
VESA WXGA1280 x 72060
VESA WXGA1280 x 76860
VESA WXGA1280 x 76872
VESA WXGA1280 x 76885
HD1280 x 72060
HD1280 x 72072
VESA SXGA+1400 x 120060
VESA UXGA1600 x 120060
* HD1920 x 108024
* HD1920 x...

English
43
Appendices
RS232 Commands and Protocol 
Function List
Pin no.NameI/O (From Projector Side
1NC__
2RXDIN
3TXDOUT
4NC__
5GND__
6NC__
7NC__
8NC__
9NC__
RS232 Pin Assignments
351
96       

44
Appendices
RS232 Protocol Function List
Interface: 9 wires RS-232C
Baud Rate: 115200
D
ata Bit: 8
Parity: none
Stop Bits: 1
Flow Control: none
Terminatro 1Terminator 2Silence/OSD Modeset/get
Viewed AsFunction DescriptionACKHexOKOKOKOKOK

English
45
Appendices
Comand HeaderBlankBlankAddress CodeCommandBlankTerminator 1HeaderTerminator 2Silence/OSD Modeset/get
Viewed AsFunction DescriptionACKHex
s/g
TERM2
TERM1
SILN
HEADB
ADDRB
COMHB
COM* 0 IR 035 * 0 IR --sBrightnessDefault ACK2A 20 30 20 49 52 20 30 33 35 0D* 0 IR 036 * 0 IR  --sContrastDefault ACK2A 20 30 20 49 52 20 30 33 36 0D* 0 IR 037 * 0 IR  --sTintDefault ACK2A 20 30 20 49 52 20 30 33 37 0D* 0 IR 038 * 0 IR  --sColorDefault ACK2A 20 30 20 49 52 20 30 33 38 0D* 0 IR 039 * 0 IR...

46
Appendices
Please note that dam-age resulting from incorrect installation will invalidate the war-ranty.
Ceiling Mount Installation
1. To prevent damaging your projector, please use the ceil-
ing mount package for installation.
2. If you wish to use a third party ceiling mount kit, please 
ensure the screws used to attached a mount to the projec-
tor met the following specifications:
  Screw type: M4
  Maximum screw length: 10mm
  Minimum screw length: 8mm
Warning: 1.  If you buy the ceiling mount...

English
47
Appendices
Optoma Global Offices
For service or support please contact your local office.
USA
715 Sycamore DriveTel : 408-383-3700 
Milpitas, CA 95035, USAFax: 408-383-3702
www.optomausa.comService : [email protected]
Canada
5630 Kennedy Road, Mississauga,
ON, L4Z 2A9, CanadaTel : 905-361-2582
www.optoma.caFax: 905-361-2581
Europe
42 Caxton Way, The Watford Business Park
Watford, Hertfordshire, 
WD18 8QZ, UK Tel : +44 (0) 1923 691 800
www.optoma.euFax: +44 (0) 1923 691 888
Service Tel : +44...

48
Appendices
Taiwan
231,台北縣新店市民權路108號5樓
R.O.C.傳真：+886-2-2218-2313
電話：+886-2-2218-2360www.optoma.com.tw
服務處：[email protected]
Hong Kong
Unit A, 27/F Dragon Centre, 79 Wing Hong Street,
Cheung Sha Wan Kowloon, Hong Kong
Tel : +852-2396-8968Fax: +852-2370-1222
www.optoma.com.hk
China
上海市长宁区凯旋路1205号5楼电话：+86-21-62947376
邮编: 200052传真：+86-21-62947375
www.optoma.com.cn
Japan
東京都足立区綾瀬 3-25-18サポートセンター:0120-46-5040
オーエス本社ビル
E-Mail: [email protected]://www.os-worldwide.com/
Korea
WOOMI...

English
49
Appendices
Regulation & safety notices
This appendix lists the general notices of your Projector. 
FCC notice 
This device has been tested and found to comply with the limits 
for a Class B digital device pursuant to Part 15 of the FCC rules. 
These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This 
device generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the instruc-...

50
Appendices
Operation conditions 
This device complies with Part 15 of the FCC Rules. Operation 
is subject to the following two conditions:
1.this device may not cause harmful interference, and
2.this device must accept any interference received, includ-ing interference that may cause undesired operation. 
Notice: Canadian users 
This Class B digital apparatus complies with Canadian 
ICES-003. 
Remarque à l’intention des utilisateurs cana-
diens 
Cet appareil numerique de la classe B est conforme a la...