Optoma Hd806 Projector User Manual

							English
1
Table of contents
Table of Contents ...................................................................................1
Usage Notice ..........................................................................................2
Safety Information  ........................................................................\
.................2
Precautions........................................................................\
............................3
Eye Safety Warnings ........................................................................\
.............5
Introduction.............................................................................................6
Product Features ........................................................................\
...................6
Package Overview........................................................................\
.................7
Product Overview  ........................................................................\
..................8
Main Unit .....................................................................................................\
...........8
Control Panel  .....................................................................................................\
....9
Connection Ports  .................................................................................................10
Remote Control ....................................................................................................11
Installation  ............................................................................................12
Connecting the Projector ........................................................................\
.....12
Powering On/Off the Projector.....................................................................13
Powering On the Projector ...................................................................................13
Powering Off the projector  ...................................................................................14
Warning Indicator .................................................................................................14
Adjusting the Projected Image.....................................................................15
Adjusting the Projector’s Height ...........................................................................15
Adjusting the Projector’s Zoom / Focus  ...............................................................16
Adjusting Projected Image Size ...........................................................................16
User Controls  .......................................................................................17
Control Panel & Remote Control .................................................................17
On-screen Display Menus  ........................................................................\
...20
How to operate  ....................................................................................................20
Menu Tree  .....................................................................................................\
.......21
Image  .....................................................................................................\
..............22
Display   .....................................................................................................\
...........26
Setup .....................................................................................................\
...............29
System  .....................................................................................................\
............32
Appendices...........................................................................................36
Troubleshooting ........................................................................\
...................36
Image Problems  ..................................................................................................36
Intermission Problems   ........................................................................................38
Projector Status Indication  ..................................................................................39
Remote Control Problems  ...................................................................................40
Replacing the Lamp........................................................................\
.............41
Compatibility Modes  ........................................................................\
............42
RS232 Commands and Protocol Function List............................................43
Ceiling Mount Installation  ........................................................................\
....46
Optoma Global Offices ........................................................................\
........47
Regulation & Safety notices  ........................................................................\
49     
						

							2
Usage Notice
Safety Information
The lightning flash with arrowheard within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous \
volt-age” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of import operating and maintenance (servicing) instructions in the literature accompanying the appliance.
 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limitsThis Class B digital apparatus meets all requirements of the Canadian In\
ter-ference-Causing Equipment Regulations.
Important Safety Instruction  1. Read these instructions –before using this projector.  2. Keep these instructions –for future reference.  3. Follow all instructions.  4. Install in accordance with the manufacturer’s instructions A. Do not block any ventilation openings  To ensure reliable operation of the projector and to protect it from ove\
r-heating, put the projector in a position and location that will not inte\
r-fere with its proper ventilation. For example, do not place the projecto\
r on a bed, sofa, carpet, or similar surface that may block the ventilatio\
n openings. Do not put it in an enclosure, such as a bookcase or a cabinet\
 that may keep air from flowing through its ventilation openings. B. Do not use this projector near water or moisture.  To reduce the risk of fire or electric shock, do not expose the projector to rain or moisture. C. Do not install near any heat sources, such as radiators, heaters, stoves or other apparatus (including amplifiers) that produce heat.  5.  Clean only with a dry cloth.   6. Only use attachments/accessories specified by the manufacturer.  7.  Refer all servicing to qualified service personnel. Servicing is required when the projector has been damaged in any way:▀■ Such as power supply cord or plug is damaged.▀■ Liquid has been spilled or objects have fallen into the apparatus.▀■ The projector has been exposed to rain or moisture, does not oper-ate normally, or has been dropped.Do not attempt to service this projector yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma to be referred to an authorized service center near you.  8. Do not let objects or liquids enter the projector –as they may touch \
dangerous voltage points or short-out parts that could result in a fire or electric shock.  9. See projector enclosure for safety related markings.10. The projector should not be adjusted or repaired by anyone except properly qualified service personnel.       
						

							English
3
Usage Notice
Precautions
 
Please follow all warnings, precautions and mainte-
nance as recommended in this user’s guide.
When the lamp reaches the end of its life, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp” section on page 41.
▀■ Warning-Do not look into the projector’s lens when the 
lamp is on.  The bright light may hurt your 
eyes.
▀■ Warning-To reduce the risk of fire or electric shock, do 
not expose this projector to rain or moisture.
▀■ Warning-Please do not open or disassemble the projec-
tor as this may cause electric shock.
▀■ Warning-When replacing the lamp, please allow unit to 
cool down, and follow all replacement instruc-
tions. See page 41.
▀■ Warning-This projector will detect the life of the lamp 
itself.  Please be sure to change the lamp when 
it shows warning messages.
▀■ Warning-Reset the “Lamp Reset” function from the on-
screen display “System|Lamp Setting” menu 
after replacing the lamp module (refer to page 
35).
▀■ Warning-When switching the projector off, please 
ensure the cooling cycle has been completed 
before disconnecting power. Allow 90 seconds 
for the projector to cool down.
▀■ Warning-Do not use lens cap when projector is in 
operation.
▀■ Warning-When the lamp is approaching to the end 
of its life time, the message “Replacement 
suggested” will show on the screen. Please 
contact your local reseller or service center to 
change the lamp as soon as possible.
NoteNote        
						

							4
Usage Notice
  Do:
▀■   Turn off the product before cleaning.
▀■   Use a soft cloth moistened with mild detergent to clean the 
display housing.
▀■   Disconnect the power plug from AC outlet if the product is not 
being used for a long period of time.
  Do not:
▀■   Block the slots and openings on the unit provided for ventila-
tion.
▀■   Use abrasive cleaners, waxes or solvents to clean the unit.
▀■   Use under the following conditions:
-   Extremely heat, cold or humidity.
-   In areas susceptible to excessive dust and dirt.
-   Near any appliance generating a strong magnetic field.
-   In direct sunlight.        
						

							English
5
Usage Notice
Eye Safety Warnings
 
▀■  Avoid staring directly into the projector beam at all times.
▀■  Minimize standing facing into the beam. Keep your back to 
the beam as much as possible.
▀■ A stick or laser pointer is recommended to avoid the need for 
the user to enter the beam. 
▀■ Ensure that projectors are located out of the line of sight from 
the screen to the audience; this ensures that, when presenters 
look at the audience, they do not also have to stare at the pro-
jector lamp. The best way to achieve this is by ceiling-mount-
ing rather than floor or table-mounting the projector.
▀■ When projector is used in a classroom, adequately supervise 
students when they are asked to point out something on the 
screen.
▀■ In order to minimize the lamp power needed, use room blinds 
to reduce ambient light levels.       
						

							6
Introduction
Product Features
 
This product is a 1080p single chip 0.95” DLP® projector. Out-
standing features include:
▀■ Native 16:9 1080p DLP® Technology
▀■ Complete 10-bit video processing (decoding, deinterlac-
ing, scaling, image enhancement and color) 
▀■ PixelWorksTM video processor chip
▀■ Studio-grade 480i/576i Standard Definition de-interlac-
ing and 1080i High Definition de-interlacing
▀■ Video Compatibility: 
▪ 480i-NTSC, NTSC4.43
▪ 576i-PAL/PAL-M/PAL-N/SECAM
▪ SDTV compatible (480i/p, 576i/p)
▪ HDTV compatible (720p, 1080i/p)
▪ RGB signal: HD, XGA, SVGA, VGA res-sizing
▀■ Macintosh compatible
▀■ Full function IR remote control with back light
▀■ Advanced vertical digital keystone correction and high 
quality full screen image re-scaling
▀■ User friendly control panel
▀■ Optoma’s patent-pending O2AirTM Photo Catalyst air 
purification technology
▀■ HDMI & DVI support HDCP function. 
▀■ HDMI(support HDMI 1.3) x2, DVI-I (support HDMI 1.1, 
SCART, HDTV) x1, YPbPr (RCA) x1, S-Video x1, Com-
posite x1       
						

							English
7
Introduction
Power Cord 1.8m
IR Remote Controller
Package Overview
This projector comes with all the items shown below.  
Check to make sure your unit is complete.  Contact your 
dealer immediately if anything is missing.
Documentation : 
	User’s Manual
	Warranty Card
	Quick Start Card
Due to the difference in applications for each country, some regions may have different ac-cessories.
2 x AA Batteries
Projector with lens cap
RCA Component Cable for YPbPr 2.0m
RS232 Cable 1.8m
DVI to VGA Adaptor
Available in European version only
SCART RGB/S-Video AdaptorVGA Cable 1.8mNoteNote        
						

							8
Introduction
1. Control Panel
2. Zoom Lever
3. Focus Ring
4. Elevator Button (one on each side)
5. Elevator Feet
6. Zoom Lens
7. IR Receivers
8. Connection Ports
9. Power Socket
10. Tilt-Adjustment Feet
11. Air exhaust vent
Main Unit
Product Overview
35
5
46
118
10
10
2
7
7
59
1
10
7
1       
						

							English
9
Introduction
Control Panel
1. Power and IR Receiver
2. Power Indicator LED 
3. Lamp Indicator LED
4. Temp Indicator LED
5. Menu (On/Off)
6. Four Directional Select Keys
7. Source Select
8. Re-Sync
9. Enter
432
65789
1       
						

							10
Introduction
Connection Ports
1. +12V Relay Connector
2. Composite Video Input Connector
3. RS232 Input Connector
4. S-Video Input Connector
5. DVI-I Input Connector (PC Digital and DVI-HDCP)
6. HDMI 1 Connector
7. HDMI 2 Connector
8. Component Video Input Connector
9. Power Socket
10. Kensington MicrosaverTM Lock Port
6541
1098
237