Optoma Hd800xlv Projector User Manual

English
21

User Controls

Menu Tree1 EnglishCurrent/All
IRIS On/
(1~16)Off
On/Off
Reset
Image AI
Menu Location
SYSTEM Phase/Trackin
g/H Position/V PositionY Gain/Pb Gain/Pr Gain/
Y Bias/Pb Bias/Pr Bias
High Altitude On/Off
Si
gnal
V Ima
ge Shift
Edge Mask
English/Deutsch/Français/Italiano/Español/
Português/Polski/Nederlands/ �������/
Suomi/Svenska/Norsk/Dansk/ ��������/撫繁��/趣雜��/��勤/���
HDMI 1/HDMI 2/DVI-Digital/DVI-Analog/
DVI-SCART/Component/S-Video/Video
On/Off
Auto Power Of
f
Language
Source Lock...

22

User Controls

Image
 Mode
There are many factory presets optimized for various types of im-
ages.
 Cinema: For home theater.
 Bright: For the brightest possible image, Use if ambient light is 
present.
 TV: For watching analogue or digital TV images.
 sRGB: For standard color.
 User: Memorize user’s settings.
 Contrast
The contrast controls the degree of difference between the lightest 
and darkest parts of the picture. Adjusting the contrast changes the 
amount of black and white in the...

English
23

User Controls

 Tint 
Adjusts the color balance of red and green.
 Press the  to increase the amount of green in the image.
 Press the  to increase the amount of red in the image.
 Sharpness 
Adjusts the sharpness of the image.
 Press the  to decrease the sharpness.
 Press the  to increase the sharpness.         

24

User Controls

 Noise Reduction
The motion Adaptive Noise Reduction reduces the amount of vis-
ible noise interlaced signals. The range is from “0” to “10”. (0:Off)
 Gamma
This unit comes with 10 preset gamma curves. After the initial setup 
and fine tuning is completed, utilize the Gamma Adjustment steps 
to optimize your image output.
 Degamma
This allows you to choose a degamma table that has been fine-tuned 
to bring out the best image quality for the input.
 Film: For home theater.
 Video: For...

English
25

User Controls

pre-set modes that allow the user to switch among the pre-sets to 
obtain different image effects. (0:Off/1:On)
 Color Temp.
Adjust the color temperature. At cold temperature, the screen 
looks colder; at warm temperature, the screen looks warmer. 
1)  For User mode adjustment, put cursor on “User”, and press 
“Enter” to select this adjustment item.
2)  Use “”, “” to highlight the desired adjustment items, then 
press “Enter” or “” to select it. The Menu disappears and 
only...

26

User Controls

 Format
Use this function to choose your desired aspect ratio.
 4:3: This format is for 4x3 input sources not enhanced for Wide-
screen TV.
 16:9: This format is for 16x9 input sources, like HDTV and DVD 
enhanced for Widescreen TV.
 Native: This format displays the original image without any scal-
ing.
Display
Input Signal
Display area
Picture area
Display on Screen         

English
27

User Controls

 LBX: This format is for non-16x9, letterbox source and for 
users who use external 16x9 lens to display 2.35:1 aspect ratio 
using full resolution. 
Detail informations about LBX mode :
1.  Some Letter-Box DVDs are not enhanced for 16x9 TVs. In 
this situation, the image will not look right when dis-
played in 16:9 mode. 
In this situation, please try to using the 4:3 mode to view 
the DVD.
But if the content itself is not 4:3, it will have black bars 
around the image in a...

28

User Controls

 V Keystone
Press the  or  to adjust image distortion vertically and makes a 
squarer image.         

English
29

User Controls

 Language
Choose the multilingual OSD menu. Press  or   into the sub 
menu and then use the   or  key to select your preferred lan-
guage. Press “Select (Enter)” to finalize the selection.
 Input Source
Enable input sources. Press  or  into the next menu as below and 
then use  or  to select. Press “Select (Enter)” to finalize the selec-
tion. The projector will not search inputs that are de-selected.
 Source Lock
When this function is turned off, the projector will search for...

30

User Controls

 High Altitude
Choose “On” to turn on High Altitude mode. Operates the fans at 
full speed continuously to allow for proper high altitude cooling of 
the projector.
 Auto Power Off
Sets the interval of power-off of the system, if there is no signal 
input. (In minutes)
RGB/HDTV SourceVideo Source
 Signal
 Phase: Changes the display data frequency to match the fre-
quency of your computer’s graphic card. When you experience a 
vertical flickering bar, use this function to make an...