Optoma Hd800xlv Projector User Manual
Have a look at the manual Optoma Hd800xlv Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English 21 User Controls Menu Tree1 EnglishCurrent/All IRIS On/ (1~16)Off On/Off Reset Image AI Menu Location SYSTEM Phase/Trackin g/H Position/V PositionY Gain/Pb Gain/Pr Gain/ Y Bias/Pb Bias/Pr Bias High Altitude On/Off Si gnal V Ima ge Shift Edge Mask English/Deutsch/Français/Italiano/Español/ Português/Polski/Nederlands/ �������/ Suomi/Svenska/Norsk/Dansk/ ��������/撫繁��/趣雜��/��勤/��� HDMI 1/HDMI 2/DVI-Digital/DVI-Analog/ DVI-SCART/Component/S-Video/Video On/Off Auto Power Of f Language Source Lock SETUP Advanced Shar pness Noise Reduction IMAGE Mode Tint IMAGE|Advanced Cinema/Bri ght/TV/sRGB/UserContrast Brightness Color Warm Gamma Film/Video/Gra phics/PC True Vivid Ed ge EnhanceB/W Extension Color Temp Degamma DISPLAY 12V Tri gger Lamp SettingProjection H Ima ge Shift V Keystone In put Source Overscan Mid User:Red Gain/Green Gain/ Blue Gain/Red Bias/ Green Bias/Blue BiasCold Color S pace RGB/YCbCr Format White Level/Black Level/Saturation/Tint 16:9/4:3/LBX/Native Lam p Reminder Background Dark Blue/Black/Gray/Start Logo STD/LBX Test Pattern Grid/White Pattern/None Exit Off (0)/(1~5) Off(0)/(1~2)On(1)/Off(0) On/Off Brite Mode On/OffSYSTEM|Lamp SettingLamp Hour Lam p Reset Yes/No 1 English Current/All IRIS On/ (1~16)Off On/Off Reset Image AI Menu Location SYSTEM Phase/Trackin g/H Position/V PositionY Gain/Pb Gain/Pr Gain/ Y Bias/Pb Bias/Pr Bias High Altitude On/Off Si gnal V Ima ge Shift Edge Mask English/Deutsch/Français/Italiano/Español/ Português/Polski/Nederlands/ �������/ Suomi/Svenska/Norsk/Dansk/ ��������/撫繁��/趣雜��/��勤/��� HDMI 1/HDMI 2/DVI-Digital/DVI-Analog/ DVI-SCART/Component/S-Video/Video On/Off Auto Power Of f Language Source Lock SETUP Advanced Shar pness Noise Reduction IMAGE Mode Tint IMAGE|Advanced Cinema/Bri ght/TV/sRGB/UserContrast Brightness Color Warm Gamma Film/Video/Gra phics/PC True Vivid Ed ge EnhanceB/W Extension Color Temp Degamma DISPLAY 12V Tri gger Lamp SettingProjection H Ima ge Shift V Keystone In put Source Overscan Mid User:Red Gain/Green Gain/ Blue Gain/Red Bias/ Green Bias/Blue BiasCold Color S pace RGB/YCbCr Format White Level/Black Level/Saturation/Tint 16:9/4:3/LBX/Native Lam p Reminder Background Dark Blue/Black/Gray/Start Logo STD/LBX Test Pattern Grid/White Pattern/None Exit Off (0)/(1~5) Off(0)/(1~2)On(1)/Off(0) On/Off Brite Mode On/OffSYSTEM|Lamp SettingLamp Hour Lam p Reset Yes/No 1 English Current/All IRIS On/ (1~16)Off On/Off Reset Image AI Menu Location SYSTEM Phase/Trackin g/H Position/V PositionY Gain/Pb Gain/Pr Gain/ Y Bias/Pb Bias/Pr Bias High Altitude On/Off Si gnal V Ima ge Shift Edge Mask English/Deutsch/Français/Italiano/Español/ Português/Polski/Nederlands/ �������/ Suomi/Svenska/Norsk/Dansk/ ��������/撫繁��/趣雜��/��勤/��� HDMI 1/HDMI 2/DVI-Digital/DVI-Analog/ DVI-SCART/Component/S-Video/Video On/Off Auto Power Of f Language Source Lock SETUP Advanced Shar pness Noise Reduction IMAGE Mode Tint IMAGE|Advanced Cinema/Bri ght/TV/sRGB/UserContrast Brightness Color Warm Gamma Film/Video/Gra phics/PC True Vivid Ed ge EnhanceB/W Extension Color Temp Degamma DISPLAY 12V Tri gger Lamp SettingProjection H Ima ge Shift V Keystone In put Source Overscan Mid User:Red Gain/Green Gain/ Blue Gain/Red Bias/ Green Bias/Blue BiasCold Color S pace RGB/YCbCr Format White Level/Black Level/Saturation/Tint 16:9/4:3/LBX/Native Lam p Reminder Background Dark Blue/Black/Gray/Start Logo STD/LBX Test Pattern Grid/White Pattern/None Exit Off (0)/(1~5) Off(0)/(1~2)On(1)/Off(0) On/Off Brite Mode On/OffSYSTEM|Lamp SettingLamp Hour Lam p Reset Yes/No 1 English Current/All IRIS On/ (1~16)Off On/Off Reset Image AI Menu Location SYSTEM Phase/Trackin g/H Position/V PositionY Gain/Pb Gain/Pr Gain/ Y Bias/Pb Bias/Pr Bias High Altitude On/Off Si gnal V Ima ge Shift Edge Mask English/Deutsch/Français/Italiano/Español/ Português/Polski/Nederlands/ �������/ Suomi/Svenska/Norsk/Dansk/ ��������/撫繁��/趣雜��/��勤/��� HDMI 1/HDMI 2/DVI-Digital/DVI-Analog/ DVI-SCART/Component/S-Video/Video On/Off Auto Power Of f Language Source Lock SETUP Advanced Shar pness Noise Reduction IMAGE Mode Tint IMAGE|Advanced Cinema/Bri ght/TV/sRGB/UserContrast Brightness Color Warm Gamma Film/Video/Gra phics/PC True Vivid Ed ge EnhanceB/W Extension Color Temp Degamma DISPLAY 12V Tri gger Lamp SettingProjection H Ima ge Shift V Keystone In put Source Overscan Mid User:Red Gain/Green Gain/ Blue Gain/Red Bias/ Green Bias/Blue BiasCold Color S pace RGB/YCbCr Format White Level/Black Level/Saturation/Tint 16:9/4:3/LBX/Native Lam p Reminder Background Dark Blue/Black/Gray/Start Logo STD/LBX Test Pattern Grid/White Pattern/None Exit Off (0)/(1~5) Off(0)/(1~2)On(1)/Off(0) On/Off Brite Mode On/OffSYSTEM|Lamp SettingLamp Hour Lam p Reset Yes/No White Level/Black Level/Saturation/Hue/IRE
22 User Controls Image Mode There are many factory presets optimized for various types of im- ages. Cinema: For home theater. Bright: For the brightest possible image, Use if ambient light is present. TV: For watching analogue or digital TV images. sRGB: For standard color. User: Memorize user’s settings. Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. Press the to decrease the contrast. Press the to increase the contrast. Brightness Adjust the brightness of the image. Press the to darken image. Press the to lighten the image. Color Adjusts a video image from black and white to fully saturated color. Press the to decrease the amount of color in the image. Press the to increase the amount of color in the image. “Image mode-->TV” will support automati-cally “Overscan” with step “2” as default. NoteNote
English 23 User Controls Tint Adjusts the color balance of red and green. Press the to increase the amount of green in the image. Press the to increase the amount of red in the image. Sharpness Adjusts the sharpness of the image. Press the to decrease the sharpness. Press the to increase the sharpness.
24 User Controls Noise Reduction The motion Adaptive Noise Reduction reduces the amount of vis- ible noise interlaced signals. The range is from “0” to “10”. (0:Off) Gamma This unit comes with 10 preset gamma curves. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps to optimize your image output. Degamma This allows you to choose a degamma table that has been fine-tuned to bring out the best image quality for the input. Film: For home theater. Video: For video or TV source. Graphics: For image source. PC: For PC or computer source. True Vivid This adjustable item utilizes a new color-processing algorithm and enhancements to enable the picture’s vividness to be significantly increased. The range is from “0” to “5”. Edge Enhance There are 3 pre-set modes and one user mode for advanced edge enhancement filter. You can easily switch between the modes to achieve different effects. (0:Off) B/W Extension Black and White Extension can stretch the black and white levels to automatically increase the contrast of input image. This unit has 2 Image | Advance “B/W Extension” can’t support when source is HDMI, analog or digi-tal RGB via DVI port. NoteNote
English
25
User Controls
pre-set modes that allow the user to switch among the pre-sets to
obtain different image effects. (0:Off/1:On)
Color Temp.
Adjust the color temperature. At cold temperature, the screen
looks colder; at warm temperature, the screen looks warmer.
1) For User mode adjustment, put cursor on “User”, and press
“Enter” to select this adjustment item.
2) Use “”, “” to highlight the desired adjustment items, then
press “Enter” or “” to select it. The Menu disappears and
only an adjustment bar appears.
3) Use “”, “” arrow keys to adjust image.
26 User Controls Format Use this function to choose your desired aspect ratio. 4:3: This format is for 4x3 input sources not enhanced for Wide- screen TV. 16:9: This format is for 16x9 input sources, like HDTV and DVD enhanced for Widescreen TV. Native: This format displays the original image without any scal- ing. Display Input Signal Display area Picture area Display on Screen
English 27 User Controls LBX: This format is for non-16x9, letterbox source and for users who use external 16x9 lens to display 2.35:1 aspect ratio using full resolution. Detail informations about LBX mode : 1. Some Letter-Box DVDs are not enhanced for 16x9 TVs. In this situation, the image will not look right when dis- played in 16:9 mode. In this situation, please try to using the 4:3 mode to view the DVD. But if the content itself is not 4:3, it will have black bars around the image in a 16:9 display. For this kind of con- tent, you can use LBX mode to fill the image in the 16x9 display as much as possible. 2. If you use an external 16x9 lens, this LBX mode also allows you to watch a 2.35:1 content (include Anamorphic DVD and HDTV film source) that support anamorphic wide is enhanced for 16x9 Display in a wide 2.35:1 image. In this case, there are no black bars, the full lamp power and vertical resolution is fully utilized for maximum view- ing effects. Other than these two occasions, one should stay with 16:9 and 4:3 modes for most viewing experiences. Overscan Overscan function removes the noise in a video image. Overscan the image to remove video encoding noise on the edge of video source. Edge Mask Press the to reduce the size of an image. Press the to magnify an image on the projection screen. H Image Shift Shifts the projected image position horizontally. V Image Shift Shifts the projected image position vertically. (*) Each I/O has differ-ent setting of “Over-scan”. (*) “Image mode-->TV” will support automati-cally “Overscan” with step “2” as default. (*) “Overscan” and “Edge mask” can’t work at same time. (*) “H Image shift” only support in format “4:3” and “Native”. If source is 1080i/p, “H Image shift” only support in format “4:3”. NoteNote
28 User Controls V Keystone Press the or to adjust image distortion vertically and makes a squarer image.
English 29 User Controls Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred lan- guage. Press “Select (Enter)” to finalize the selection. Input Source Enable input sources. Press or into the next menu as below and then use or to select. Press “Select (Enter)” to finalize the selec- tion. The projector will not search inputs that are de-selected. Source Lock When this function is turned off, the projector will search for other signals if the current input signal is lost. When this function is turned on, it will search for a specified connection port. Setup
30 User Controls High Altitude Choose “On” to turn on High Altitude mode. Operates the fans at full speed continuously to allow for proper high altitude cooling of the projector. Auto Power Off Sets the interval of power-off of the system, if there is no signal input. (In minutes) RGB/HDTV SourceVideo Source Signal Phase: Changes the display data frequency to match the fre- quency of your computer’s graphic card. When you experience a vertical flickering bar, use this function to make an adjustment. Tracking : Synchronizes the signal timing of the display with the graphics card. If you experience an unstable or flickering image, use this function to correct it. H Position: Adjusts the horizontal position. V Position: Adjusts the vertical position. White Level : Allow user adjust White Level when inputting S- Video or Video/CVBS signals. Black Level : Allow user adjust Black Level when inputting S- Video or Video/CVBS signals. Saturation : Adjusts a video image from black and white to fully saturated color. Press the to decrease the amount of color in the image. Press the to increase the amount of color in the im- age. “Signal” don’t support when source is HDMI or DVI-D. NoteNote