Optoma Ex631 Projector User Manual
Have a look at the manual Optoma Ex631 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
EN-31 Video Image Color Adjust a video image from black and white to fully saturated color. Sharpness Sharpen or soften the image. Tint Shift colors toward red or green. Sound Vo l u m e Adjust the volume level. Mute Cut off the sound temporarily. Internal Speaker Use the internal speaker of projector.
EN-32 Setting Menu Position Choose the menu location on the display screen. Projection Adjust the picture to match the orientation of the projector: upright or upside- down, in front of or behind the screen. Invert or reverse the image accord- ingly. Screen Type (for WXGA model only) Choose the screen type from16:10 or 16:9. Color Space Select an appropriate color matrix type from RGB,YUV. Lamp Time Display the lamp’s elapsed operating time (in hours). Lamp Time Reset Reset the lamp Hour to 0 hours. Security Turn on the projector with or without password verification. When the pass- word function is added, image projection will require to input the preset pass- word when turning on the projector. Pass-code default value is Right-Left- Down-Up (first time).
EN-33 Power mode (standby) Set whether the VGA OUT function works when the projector is in standby (powered off but connected to AC power). „ Eco mode: The VGA OUT function will not work when the projector is in standby. „ Active mode: The VGA OUT and AUDIO OUT functions will work when the projector is in standby. Auto Power Off Set the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. Then projector will automatically power off when the countdown has finished (in minutes). Quick Resume If the projector is accidentally turned off, this feature allows the projector to be instantly powered on again within 100 seconds of power down. Source Lock „On: The projector will search specified connection port. „Off: The projector will search for other signals if the current input signal is lost. Brightness Mode „Bright: Choose “Bright” to increase the brightness. „Eco: Choose “Eco” to dim the projector lamp which will lower power consumption and extend the lamp life by up to 120%. „Eco+: Choose “Eco+” to dim the projector lamp which will automatically detect the brightness level of the content and reduce lamp power consumption (up to 70 percent) during periods of inactivity. High Altitude Use this function to allow the fans operates at full speed continuously to achieve proper high altitude cooling of the projector. OSD Timeout Duration of OSD menu display countly starts (at idle state by second). Closed Captioning Enable or disable closed captioning by selecting CC1,CC2 or Off. Projector ID ID definition can be set up by menu (range 0~99), and allow user control an individual projector by RS232. Network Allow you to configure the LAN settings. „Network State:Display the network connection status. „DHCP: This protocol automatically assign IP Address to networked
EN-34devices. „On: Assign an IP address to the projector from an external DHCP server automatically. „Off: Assign an IP address manually. „IP Address: Select an IP address. „Subent mask: Select subnet mask number. „Gateway: Select the default gateway of the network connected to the projector. „DNS: Select DNS number. „Apply: Press and then choose Yes to apply the selection. Wireless This setting is only for wireless module use. Wireless is only functional with VGA 1 connector. 3D Mode „On: Enable 3D Mode function. „Off: Disable 3D Mode function. When 3D Sync is set to On, the settings for input source or broadcast device are required as below: 1. For S-VIDEO and VIDEO input source, signal type should be NTSC (60). 2. For computer input source, the hardware and software requirements should be Windows 7 operating system, 3D videos and professional 3D video player softwares. Computers output frequency should be 120Hz and display card should be higher than NVIDIA 9800. 3D Sync Invert „On: Invert left and right frame contents. „Off: Default frame contents.
EN-35 Language Select the language used by the on-screen menu. Factory Default Restore settings to factory default .
EN-36 Use web browser to control your projector 1. Turn on DHCP to allow the DHCP server to automatically assign an IP, or manually enter the required network information. 2. Then choose apply and press button to complete the configuration process. 3. Open your web browser and type in the projectors IP address from the OSD LAN screen. The following web page will display as below: •When you used the projector IP address, you will can not link to your service server.
EN-37 4. The crestron control settings can be found in the [tools] tab.(see picture) Please note, each field can only contain a limited number of characters, as shown in the table below. (spaces and the other punctuation included): CategoryItemInput-Length (characters) Crestron ControlIP Address 15 IP ID 2 Port 5 ProjectorProjector Name 10 Location 9 Assigned To 9 Network ConfigurationDHCP (Enabled) (N/A) IP Address 15 Subnet Mask 15 Default Gateway 15 DNS Server 15 User PasswordEnabled (N/A) New Password 15 Confirm 15 Admin PasswordEnabled (N/A) New Password 15 Confirm 15
EN-38 Connect you computer to the projector 1. Find an IP Address (10.0.50.100) from LAN function of projector. 2. Select Apply and press Enter button to submit function or press MENU key to exit. 3. To open Network Connections, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections. Click the connection you want to configure, and then, under Network Tasks , click Change settings of this connection. 4. On the General tab, under This connection uses the following items, click Internet Protocol (TCP/IP), and then click Properties.
EN-39 5. Click Use the following IP address, and type in as below:. „IP address:10.0.50.101 „Subnet mask:255.0.0.0 „Default gateway:10.0.50.254 6. To open Internet Options, click IE web browser, click Internet Options, click the Connections tab and click LAN Settings....
EN-40 7. The Local Area Network (LAN) Setting dialog box appears, In the Proxy Server area, cancel the Use a proxy server for your LAN check box., then click OK button twice. 8. Open your IE and type in the IP address of 10.0.50.100 in the URL then press Enter key. Crestron RoomView Control Tool Crestron RoomViewTM provides a central monitoring station for 250+ control systems on a single Ethernet network (more are possible. the number depends on the combination of IP ID and IP address). Crestron RoomView monitors each projector, including projectors online status, system power, lamp life, network setting and hardware faults, plus any custom attribute as defined by the Administrator. The Administrator can add, delete, or edit room information, contact information and events, which are logged automatically by the software for all users.(Operation UI as following image) 1. Main Screen „Crestron RoomView function support is dependent on models.