Optoma Ep7150 Projector User Manual
Have a look at the manual Optoma Ep7150 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 29
29
English
Appendices
5. Select the “Change” button under the “Monitor” tab.
6. Click on “Show all devices.” Next, select “Standard monitor
types” under the SP box; choose the resolution mode you need
under the “Models” box.
If you are using a Notebook:1. First, follow the steps above to adjust resolution of the com-
puter.
2. Press the toggle output settings. Example: [Fn]+[F4]
If you experience diffi culty changing resolutions or your monitor
freezes, restart all equipment...](http://img.usermanuals.tech/thumb/3621/92964/w64_optoma-ep7150-manual_d-28.png "Page 29
29
English
Appendices
5. Select the “Change” button under the “Monitor” tab.
6. Click on “Show all devices.” Next, select “Standard monitor
types” under the SP box; choose the resolution mode you need
under the “Models” box.
If you are using a Notebook:1. First, follow the steps above to adjust resolution of the com-
puter.
2. Press the toggle output settings. Example: [Fn]+[F4]
If you experience diffi culty changing resolutions or your monitor
freezes, restart all equipment...")
31
English
Appendices
Problem: Message Reminders
Fan fail:
Over temperature:
Power Off:
Replace the lamp:
32 English Appendices Replacing the Lamp The projector keeps track of the lamp usage. It will show you a warning message When you see this message, change the lamp as soon as pos- sible. Make sure the projector has cooled down for at least 30 minutes before changing the lamp. Warning: Lamp compartment is hot! Allow 30 minutes to cool down before changing lamp! Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped. Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the Power button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Use a screwdriver to remove the screws from the cover. 5. Push up and remove the cover. 6. Remove the 2 screws from the lamp module. 7. Pull out the lamp module. To replace the lamp module, reverse the previous steps. 24 13
33 English Appendices Remark : “*”com-pressed computer image. Compatibility Modes ModeResolution(ANALOG) V.Frequency(Hz) H.Frequency(kHz) VESA VGA640 x 3507031.5 VESA VGA640 x 3508537.9 VESA VGA640 x 4008537.9 VESA VGA640 x 4806031.5 VESA VGA640 x 4807237.9 VESA VGA640 x 4807537.5 VESA VGA640 x 4808543.3 VESA VGA720 x 4007031.5 VESA VGA720 x 4008537.9 VESA SVGA800 x 6005635.2 VESA SVGA800 x 6006037.9 VESA SVGA800 x 6007248.1 VESA SVGA800 x 6007546.9 VESA SVGA800 x 6008553.7 VESA XGA1024 x 7686048.4 VESA XGA1024 x 7687056.5 VESA XGA1024 x 7687560.0 VESA XGA1024 x 7688568.7 * VESA SXGA1152 x 8647063.8 * VESA SXGA1152 x 8648577.1 * VESA SXGA1280 x 10246063.98 * VESA SXGA1280 x 10247579.98 * VESA SXGA+1400 x 10506063.98 * VESA UXGA1600 x 12006075 MAC LC 13”640 x 48066.6634.98 MAC II 13”640 x 48066.6835 MAC 16”832 x 62474.5549.725 MAC 19”1024 x 7687560.24 * MAC1152 x 87075.0668.68 MAC G4640 x 4806031.35 i MAC DV1024 x 7687560 * i MAC DV1152 x 8707568.49 * i MAC DV1280 x 9607575
34 English Appendices Optoma Global Offi ces For service or support please contact your local offi ce. USA 715 Sycamore Drive Tel : 408-383-3700 Milpitas, CA 95035, USA Fax: 408-383-3702 www.optomausa.comService : [email protected]@optoma.com Canada 5630 Kennedy Road, Mississauga, ON, L4Z 2A9, Canada Tel : 905-882-4228Fax: 905-882-4229 www.optoma.com Europe 42 Caxton Way, The Watford Business Park Watford, Hertfordshire, WD18 8QZ, UK Tel : +44 (0) 1923 691 800 Fax: +44 (0) 1923 691 888 www.optomaeurope.com Service Tel : +44 (0)1923 691865 Service : [email protected]@tsc-europe.com Taiwan 5F., No. 108, Minchiuan Rd. Tel : +886-2-2218-2360 Shindian City, Taipei Taiwan 231, Fax: +886-2-2218-2313 R.O.C. www.optoma.com.tw Service : [email protected]@optoma.com.tw asia.optoma.com Hong Kong Room 2507, 25/F., China United Plaza, No. 1008 Tai Nan West Street, Lai Chi Kok, Kowloon, Hong Kong Tel : +852-2396-8968Fax: +852-2370-1222 www.optoma.com.hk China 5F, No. 1205, Kaixuan Rd., Tel : +86-21-62947376 Changning District Fax: +86-21-62947375 Shanghai, 200052, China www.optoma.com.cn Latin America 715 Sycamore Drive Tel : 408-383-3700 Milpitas, CA 95035, USA Fax: 408-383-3702 www.optoma.com.br www.optoma.com.mx
35 English Appendices Regulation & safety notices This appendix lists the general notices of your Projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc- tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be deter- mined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the device and receiver. • Connect the device into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/television technician for help. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Caution Changes or modifi cations not expressly approved by the manufacturer could void the user’s authority, which is Changes or modifi cations not expressly approved by the manufacturer could void the user’s authority, which is Changes or modifi cations not expressly approved by the granted by the Federal Communications Commission, to manufacturer could void the user’s authority, which is granted by the Federal Communications Commission, to manufacturer could void the user’s authority, which is operate this computer.granted by the Federal Communications Commission, to operate this computer.granted by the Federal Communications Commission, to
36 English Appendices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.this device may not cause harmful interference, and 2.this device must accept any interference received, includ-ing interference that may cause undesired operation.this device must accept any interference received, ining interference that may cause undesired operation.this device must accept any interference received, in Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. Remarque à l’intention des utilisateurs cana- diens Remarque à l’intention des utilisateurs cana- diens Remarque à l’intention des utilisateurs cana- Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries • EMC Directive 89/336/EEC (including amendments) • Low Voltage Directive 73/23/EEC (amended by 93/68/ EEC) • R & TTE Directive 1999/EC (if product has RF function)