Optoma Ep7150 Projector User Manual
Have a look at the manual Optoma Ep7150 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1 English Table of Contents Table of Contents .........................................................................................1 Usage Notice ................................................................................................2 Precautions ..........................................................................................................2 Introduction ..................................................................................................4 Product Features ..................................................................................................4 Package Overview ...............................................................................................5 Product Overview .................................................................................................6 Main Unit ........................................................................................................................6 Control Panel .................................................................................................................7 Connection Ports ...........................................................................................................7 Remote Control with Laser Pointer ................................................................................8 Installation ....................................................................................................9 Connecting the Projector ......................................................................................9 Powering On/Off the Projector ...........................................................................10 Powering On the Projector ...........................................................................................10 Powering Off the projector ........................................................................................... 11 Warning Indicator ......................................................................................................... 11 Adjusting the Projected Image ...........................................................................12 Adjusting the Projector Image Height ..........................................................................12 Adjusting the Projector Zoom / Focus ..........................................................................13 Adjusting Projected Image Size ...................................................................................13 User Controls .............................................................................................14 Control Panel & Remote Control ........................................................................14 On-Screen Display Menus .................................................................................16 How to Operate ...........................................................................................................16 Menu Tree ..........................................................................................................17 Language .....................................................................................................................18 Image-I ........................................................................................................................19 Image-II (Computer Mode) ...........................................................................................21 Image-II (Video Mode) ................................................................................................. 23 Audio ............................................................................................................................25 Management ................................................................................................................26 Lamp Setting ................................................................................................................27 Appendices ................................................................................................28 Troubleshooting ..................................................................................................28 Replacing the Lamp ...........................................................................................32 Compatibility Modes ...........................................................................................33 Optoma Global Offi ces ....................................................................................... 34 Regulation & Safety notices ...............................................................................35
2 English Usage Notice Precautions Follow all warnings, precautions and maintenance as recom- mended in this user’s guide to maximize the life of your unit. Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. Warning- To reduce the risk of fi re or electric shock, do not expose this product to rain or moisture. Warning- Please do not open or disassemble the product as this may cause electric shock. Warning- When changing the lamp, please allow unit to cool down, and follow all changing instructions. Warning- This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warn- ing messages. Warning- Reset the “Lamp Reset” function from the On Screen Display “Lamp Setting” menu after replacing the lamp module (refer to page 27). Warning- When switching the projector off, please ensure the projector completes its cooling cycle before disconnect- ing power. Warning- Turn on the projector fi rst and then the signal sources. Warning- Do not use lens cap when projector is in operation. Warning- When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this hap- pens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp”. (see page 32)
3 English Usage Notice Do: Turn off the product before cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’t: Block the slots and openings on the unit provided for ventila- tion. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: - In extremely hot, cold or humid environments. - In areas susceptible to excessive dust and dirt. - Near any appliance that generates a strong magnetic fi eld. - In direct sunlight.
4 English Introduction Product Features Congratulations and Thank You for choosing an EP7150 pro- jector, an Optoma Product. This product is a XGA single chip 0.55” DLPTM projector. Outstanding features include: True XGA, 1024 x 768 addressable pixels Texas Instruments Single chip DLPTM Technology NTSC/NTSC4.43/PAL/PAL-M/PAL-N/SECAM and HDTV compatible (480i/p, 576i/p, 720p, 1080i) Multi-Auto functions: Auto detection, Automatic saving of user adjustments IR remote control with laser pointer User friendly multilingual on screen menu Advanced digital keystone correction and high quality full screen image re-scaling User friendly control panel One built-in speaker UXGA, SXGA+, SXGA compression and SVGA, VGA re- sizing Mac compatible
5 English Introduction Power Cord 1.8mVGA Cable 1.8m Wireless Remote Controller Composite Video Cable 1.8m Projector with lens cap Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immedi- ately if anything is missing. Documents : User’s Guide Quick Start Card Warranty Card Quick Troubleshooting Guide SCART VGA/S-Video Adaptor(available in European region only) Due to the differ-ence in applications for each country, some regions may have different ac-cessories. 2 x AA BatteriesCarry Bag
6 English Introduction 1. Control Panel 2. Zoom Lever 3. Power Socket 4. Speaker 5. Elevator Button 6. Zoom Lens 7. Focus Ring 8. IR Receivers 9. Connection Ports Main Unit Product Overview 12 5 6 1 9 8 3 7 2 4
7 English Introduction Control Panel 1. Enter 2. Menu (On/Off) 3. Power 4. Four Directional Select Keys 123 89765 4 Connection Ports 1. VGA-In SCART Connector (PC Analog signal/SCART RGB/HDTV/Component Video Input) 2. Composite Video Input Connector 3. S-Video Input Connector 4. Audio Input Connector 5. Service Connector 6. KensingtonTM Lock Port 43256 5. Source Select 6. Resync 7. Power LED 8. Lamp Indicator LED 9. Temp Indicator LED 1
8 English Introduction Remote Control with Laser Pointer 1. Laser Button 2. Four Directional Select Keys 3. Keystone +/- 4. Page Up 5. Page Down 6. Source Select 7. Freeze 8. Power 9. Menu 10. Enter 11. Mute 12. Resync 13. Hide 8 10 11 4 5 1 12 13 6 7 92 3
9 English Installation Connecting the Projector Due to the differ-ence in applications for each country, some regions may have different acces-sories.S-Video Output Video OutputDVD Player, Settop Box, HDTV receiver RGB 1. ..............................................................................................................VGA Cable2. ...........................................................Audio Input Cable (Optional Accessory)3. ........................................................................................Composite Video Cable4. ...................................................................S-Video Cable (Optional Accessory)5. .......................................................Audio Output Cable (Optional Accessory)6. .....................................SCART VGA/S-Video Adaptor (For European Only)7. ...................................D-15 to RCA Adapter for YPbPr (Optional Accessory) 1 2 6 54 3 7 1 To ensure the projector works well with your computer, please set the display mode of your graphic card less than or equal to 1600 x 1200 resolution. Make sure the timing of the display mode is compatible with the projector. Refer to the “Compatibility Modes” section on page 33.
10 English Installation Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will fl ash green. 3. Turn on the lamp by pressing “Power ” button on the control panel. And the Power LED will turn green. 4. Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically within “Management” menu; check that “Source Lock” has been set to “Off”. If you connect multiple sources at the same time, use the “Source” button on the control panel or on remote control to switch. Powering On/Off the Projector Turn on the projec- tor fi rst and then the signal sources. Power Lens Cap1 2