Olympus Vp 1 Projector User Manual

E-31
Projecting a Picture in Picture
This function displays the video image (i.e., the picture of the
VIDEO connector input) on the personal computer screen (i.e.,
the PC connector input screen) as a sub-picture.
Each press of the PIP button advances the screen size of the
sub-picture one step in the sequence of On → Off (i.e., the
sub-picture display is off), and then repeats.
Note
* The main picture is termed the Analog RGB, Digital RGB, or YPbPr
input screen, whereas the sub-picture is termed the...

E-32
General Operation
Using the Quick Menu
This function permits commonly used adjustments to
be performed quickly.
Note that the Quick Menu will not be displayed unless the signal
of the connected equipment is input. Please select the input that
you wish to adjust.
Main unit operation
(1) A press of the QUICK MENU button brings up the quick ad-
justment display. Further presses allow selection of the de-
sired adjustment display.
(2) Press the 
 or  button to make the adjustment.
(3) To close the...

E-33
General Operation
Brightness Adjusts the brightness of the image.
Brightness decreases in the (–) direction and increases in the (+) direction.
Contrast Adjusts the contrast of the image.
Contrast becomes less distinct in the (–) direction and more pronounced in the
(+) direction.
V Keystone Corrects (vertical) keystone distortion of the screen.
Adjusts the left and right edges of the screen so that they are parallel.
H Keystone Corrects (horizontal) keystone distortion of the screen.
Adjusts the up...

E-34
General Operation
Correcting Keystone Distortion of the Projection Screen
This adjustment is used when the projection screen is dis-
torted.
Note that extreme distortion cannot be corrected and in such cir-
cumstances the projector should be placed to face the screen
straight on beforehand.
ENTER
ZOOM
MENU
HKSTNVKSTN
VOL
CANCEL
(3)
(1)
(1)
(2)
Adjustment Method(1) To adjust up-down distortion (e.g., Screen Example 1), press
the HKSTN button. The horizontal keystone adjustment dis-
play will appear....

E-35
General Operation
Enlargement of the Image and Video Movement
This function digitally enlarges the personal computer image and
video image (up to 10 times).
(1) Press the ZOOM button.
The zoom selection display will appear.
ENTER
ZOOM
MENU
HKSTNVKSTN
VOL
CANCEL
(4)(3)
(1)
(2)
+ –Zoom0
(2) Enlarge to the desired size.
Each press of the (+) button enlarges the image and each
press of the (–) button makes the image smaller (returning it
to 1:1).
(3) Pressing the cursor (
 ) buttons at the time of...

E-36
General Operation
Adjustment of the Volume
This function adjusts the volume of the built-in speaker.
(1) Press the VOL button.
The volume adjustment display will appear.
ENTER
ZOOM
MENU
HKSTNVKSTN
VOL
CANCEL
(3)
(2)
(1)
+ –Volume53
(2) Adjust the volume.
The (+) button increases the volume and the (–) button de-
creases the volume.
(3) To close the display immediately, press the CANCEL button.
In the absence of operations for a period of about 10 sec-
onds, the display will close automatically....

E-37
Menu Operation Method

This section describes only the menu operation method. Please see this page should you need infor-
mation while performing menu operations.

For information about a menu function, adjustment, or setting, please see one of the pages containing
such descriptions.

Adjustments and settings are made by projecting an image and adjusting to an optimum condition.

The remote control should be pointed toward the remote control sensor of the projector and operated.

To return the...

E-38
Menu Operation Method
Names and Functions of the Main Unit Buttons Used in Menu Operation
MENU
AUTO SOURCE
QUICK
MENUSTATUS
POWER
POWER
MENU button
Used to display menus, to return to menu name selections, and
to close menus (i.e., closing sub menu displays).
Also serves the function of the remote control  CANCEL button.
 (AUTO) button
Advances the selection of menu names. Advances the setting/
adjustment values of the item contents.
Also serves the function of the remote control ENTER button....

E-39
Menu Operation Method
Performing Menu Operations

The menu operations of the main unit buttons differ from those of the remote control buttons.
When both the main unit and remote control button operations are the same, the operation is de-
scribed under the remote control operation; however, only when different, the operation will also be
described under “Main unit operation”.

When a signal is not being input, only “Color”, “Setup” and “Info.” can be selected.
(“Color” can be selected for Video and...

E-40
Info. Setup View Color Image
Aspect
Filter
ProjectionAuto
3
Keystone
2Press the cursor ( ) button to select the menu name
Selection of the Menu Name
ENTER
CANCELMENU
HKSTNVKSTN
Red
Each press of the cursor () button advances the selection one step in the sequence of “Color” →
“View” → “Setup” → “Info.” → “Image”. Each press of the cursor () button causes a return of one
step.
The selected menu name will appear in red.
Note
At the time of menu name selection, check that the item name cursor is...