Olympus Camera Sz 16 Ihs Instruction Manual

							51EN
OLYMPUS Viewer 3
Operating 
SystemMac OS X v10.5–v10.8
Processor Intel Core Solo/Duo 1.5 GHz or better 
(Core 2 Duo 2 GHz or better required 
for movies)
RAM 1GB or more (2GB or more 
recommended)
Free Hard 
Drive Space 3GB or more
Monitor 
Settings 1024 × 768 pixels or more
Minimum 32,000 colors (16,770,000 
colors recommended)
 
● Other languages can be selected from the 
language combo box. For information on using the 
software, see online help.
3 Copy the camera manual. 
● Click the “Camera Instruction Manual” button to 
open the folder containing the camera manuals. 
Copy the manual for your language to the 
computer
. 
						

							52EN
Direct printing (PictBridge)
By connecting the camera to a PictBridge-compatible 
printer, you can print images directly without using a 
computer.
To  fi nd out if your printer supports PictBridge, refer to 
the printer’s instruction manual.
 
● The printing modes, paper sizes, and other 
parameters that can be set with the camera vary 
depending on the printer that is used. For details, 
refer to the printer’s instruction manual.
 
● For details on the available paper types, loading 
paper, and installing ink cassettes, refer to the 
printer’s instruction manual.
 
● In the setup menu, set [USB Connection] to [Print]. 
[USB Connection] (p. 41)
 Printing images at the printer’s 
standard settings [Easy Print]
1 Display the image to be printed on 
the monitor.
 
● “Viewing images” (p. 18)
2 Turn on the printer, and then 
connect the printer and camera.
USB cable 
(supplied)
I (right)
Multi-connector
3 Press I to start printing.
4 To print another image, use  HI 
to select an image, and press the 
A button.
To exit printingTo exit printingAfter a selected image is displayed on the screen, 
disconnect the USB cable from the camera and 
printer. 
						

							53EN
Changing the printer’s settings for printing [Custom Print]
1 Display the image to be printed on 
the monitor.
 
● “Viewing images” (p. 18)
2 Turn on the printer, and then 
connect the printer and camera.
3 Press the A button.
4 Use FG to select the print mode, 
and press the A button.
Submenu 2 Application
PrintThis prints the image selected 
in Step 8.
All Print This prints all images stored in the 
internal memory or card.
Multi PrintThis prints one image in a multiple 
layout format.
All Index This prints an index of all images 
stored in the internal memory 
or card.
Print Order
*1This prints images based on the 
print reservation data on the card.
*1  [Print Order] is available only when print  reservations have been made. “Print Reservations” 
(p. 55)
5 Use FG to select [Size] 
(Submenu 3), and press  I.
 
● If the [Printpaper] screen is not displayed, the 
[Size], [Borderless], and [Pics/Sheet] are set to 
the printer’s standard.
MENUPrintpaper
Size Borderless Back
StandardStandard
6 Use FG to select the 
[Borderless] or [Pics/Sheet] 
settings, and press the 
A button.
Submenu 4 Application
Off/
On
*1
The image is printed with a border 
around it ([Off]).
The image is printed to  fi ll the 
entire paper ([On]).
(The number 
of images per 
sheet varies 
depending on 
the printer.) The number of images per sheet 
([Pics/Sheet]) is selectable only 
when [Multi Print] is selected in 
Step 4.
*1 The available settings for [Borderless] vary 
depending on the printer.
  If [Standard] is selected in Steps 5 and 6, the 
image is printed at the printer’s standard settings. 
						

							54EN
7 Use HI to select an image.
8 Press F to make a print 
reservation for the current image. 
Press G to make the detailed 
printer settings for the current 
image.
To make the detailed printer settingsTo make the detailed printer settings1 Use FGHI to select the setting, and press the 
A button.
Submenu 5 Submenu 6 Application

						

							55EN
11 Use FG to select [Print], and 
press the A button.
 
● Printing starts.
 
● When [Option Set] is selected in [All Print] 
mode, [Print Info] screen is displayed.
 
● When printing is  fi nished, the [Print Mode 
Select] screen is displayed.
Multi Print
Print Order All IndexAll Print
Print Print
MENUPrint Mode Select Back
To cancel printingTo cancel printing1 
Press the  button while [Do Not Remove 
USB Cable] is displayed.
2  Select [Cancel] using  FG and then press the 
A button.
12 Press the  button.
13 When the message [Remove USB 
Cable] is displayed, disconnect 
the USB cable from the camera 
and printer.
 Print Reser vations
In print reservations, the number of prints and date 
imprint option are saved in the image on the card. 
This enables easy printing at a printer or print shop 
supporting DPOF by using only the print reservations 
on the card without a computer or a camera.
 
● Print reservations can be set only for the images 
stored on the card.
 
● DPOF reservations set by another DPOF device 
cannot be changed by this camera. Make changes 
using the original device. Making new DPOF 
reservations with this camera will erase the 
reservations made by the other device.
 
● DPOF print reservations can be made for up to 999 
images per card.
 Single-frame print reser vations 
[

						

							56EN
Reser ving one print each of  all images on the card [
U]
1 Follow Steps 1 and 2 in [ 
						

							57EN
Resetting the print reser vation data for selected images
1 Follow Steps 1 and 2 in [ 
						

							58EN
Usage Tips
If the camera does not work as intended, or if an 
error message is displayed on the screen, and you 
are unsure of what to do, refer to the information 
below to fi x the problem(s).
Troubleshooting
BatteryBattery“The camera does not work even when batteries 
are installed”.
 
● Insert recharged batteries in the correct 
direction.
“Inserting and removing the battery and card 
(commercially available)” (p. 4), “Charging the 
battery” (p. 5)
 
● Battery performance may have been reduced 
temporarily due to low temperature. Take the 
batteries out of the camera, and warm them by 
putting them in your pocket for a while.
Card/Internal memoryCard/Internal memory“An error message is displayed”.
“Error message” (p. 60)
LensLens“The lens has fogged up from the inside”. 
● It is likely that there is a high level of moisture 
inside the camera. Before using the camera 
again, remove the battery and memory card 
and dry fully with the battery/card cover open.
Shutter buttonShutter button“No picture is taken when the shutter button is 
pressed”.
 
● Cancel sleep mode.
To save battery power, the camera 
automatically goes into sleep mode and the 
monitor turns off if there is no operation for 
3 minutes when the camera is turned on. No 
picture is taken even if the shutter button is 
fully pressed in this mode. Operate the zoom 
lever or other buttons to restore the camera 
from sleep mode before taking a picture. If 
the camera is left for another 5 minutes, it 
automatically turns off. Press the n 
button to turn the camera on.
 
● Press the q button to switch to the shooting 
mode.
 
● Wait until #(fl  ash charge) stops blinking 
before taking pictures.
 
● With prolonged camera use, the internal 
temperature may increase, resulting in 
automatic shutdown. If this occurs, wait until the 
camera has suffi  ciently cooled. 
The camera’s external temperature may also 
increase during use, however this is normal and 
does not indicate malfunction. 
						

							59EN
MonitorMonitor“Diffi cult to see”.
 
● Condensation may have occurred. Turn off 
the power, and wait for the camera body 
to become acclimated to the surrounding 
temperature and dry out before taking pictures.
“The light is caught in the picture”.  
● Shooting with  fl ash in dark situations results in 
an image with many  fl ash refl  ections on dust 
in the air.
Date and time functionDate and time function“Date and time settings return to the default 
setting”.
 
● If the batteries are removed and left out of the 
camera for about 3 days*1, the date and time 
settings return to the default setting, and must 
be reset.
*1  The time until the date and time settings  return to the default setting varies depending 
on how long the batteries have been loaded.
“Turning on the camera and making the initial 
settings” (p. 7)
MiscellaneousMiscellaneous“The camera makes a noise when taking 
pictures”.  
● The camera may activate the lens and make a 
noise even if no operation is performed. This 
is because the camera automatically performs 
actions of auto focus as far as it is ready to 
shoot. 
						

							60EN
 Error message
 
● When one of the messages below is displayed on 
the monitor, check the corrective action.
Error message Corrective action
Card Error Card problem
Insert a new card.
Write Protect Card problem
The card write-protect switch is 
set to the “LOCK” side. Release 
the switch.
Memory Full
Internal memory problem
•  Insert a card.
•  Erase unwanted images.*1
Card FullCard problem
•  Replace the card.
•  Erase unwanted images.*1
Card Setup
Format
Power Off
Card problem
Use FG to select [Format], 
and press the A button. Next, 
use FG to select [Yes], and 
press the A button.
*2
Memory Setup
Memory Format
Power Off Power Off
Internal memory problem
Use FG to select [Memory 
Format], and press the 
A button. Next, use FG to 
select [Yes], and press the A 
button.
*2
Error message Corrective action
No Picture Internal memory/Card 
problem
Take pictures before viewing 
them.
Picture Error Problem with selected image
Use photo retouch software, 
etc. to view the image on a 
computer. If the image still 
cannot be viewed, the image 
fi le 
is corrupted.
The Image 
Cannot Be  Edited Problem with selected image
Use photo retouch software, etc. 
to edit the image on a computer.
Battery Empty
Battery problem
Charge the battery.
No Connection Connection problem
Connect the camera and 
computer or printer correctly.
No Paper
Printer problem
Load paper into the printer.
No Ink
Printer problem
Refi
 ll the ink in the printer.*1  Before erasing important images, download them 
to a computer.
*2  All data will be erased.