Olympus Camera Sz 16 Ihs Instruction Manual

							DIGITAL CAMERA
Instruction Manual
SZ-16/DZ-105
●  Thank you for purchasing an Olympus digital camera. Before you start to \
use your new camera, please read these instructions carefully to enjoy optimum performance and a lon\
ger service life. Keep this 
manual in a safe place for future reference.
●  We recommend that you take test shots to get accustomed to your camera be\
fore taking important  photographs.
●  In the interest of continually improving products, Olympus reserves the \
right to update or modify  information contained in this manual. 
						

							2EN
Checking the contents of the box
or
Digital camera Strap Lithium Ion Battery 
(LI-50B) USB-AC adapter 
(F-2AC) USB cable 
(CB-USB8) OLYMPUS Setup 
CD-ROM
Names of PartsNames of Parts
3
21
4 6 5
7
8 911
10
1 Strap eyelet2 Connector cover3 Multi-connector4  HDMI micro connector5 Microphone6  Self-timer lamp/AF illuminator7 Battery/card cover8  Battery/card cover lock9 Flash10 Lens11 Tripod socket
Other accessories not shown: Warranty card
Contents may vary depending on purchase location. 
						

							3EN
27
89
12
11 10
3
6
1
4
5
1 Flash switch2 Speaker3 Zoom lever4 Shutter button5 Indicator lamp6 
n button7 Monitor8 R button (record movies)9 q button (switching between 
shooting and playback)
10 Arrow pad INFO (changing information display)
 #  (fl
 ash) Y (self-timer)  (erase)11  A button (OK)12  button
Attaching the camera strapAttaching the camera strap
  Pull the strap tight so that it does not come 
loose.
Arrow pad
H (left)
G (down)F (up)
I (right)
 FGHI instruct to press the up/down/left/right 
arrow pad. 
						

							4EN
 Inserting and removing the batter y and card (commercially available)
1 Follow Steps  1 and 2 to open 
the battery/card cover.
2
1Battery/card 
cover lock Battery/card cover
  Turn off the camera before opening the battery/
card cover.
2 Insert the battery while sliding the 
battery lock knob in the direction 
of the arrow.
Battery lock knob
  Insert the battery as illustrated with the C mark toward the battery lock knob.
Damage to the battery exterior (scratches, etc.) 
may produce heat or an explosion.
  Slide the battery lock knob in the direction of the arrow to unlock, and then remove the battery.
3 Insert the card straight until it 
clicks into place.
Write-protect switch
  Always use SD/SDHC/SDXC/Eye-Fi/FlashAir (with Wireless LAN function) card with this 
camera. Do not insert other types of memory 
cards. “Using the card” (p. 70)
 
● Do not touch the metallic parts of the card directly.
To remove the cardTo remove the card
12
Press the card in until it clicks and comes out slightly, 
then remove the card. 
						

							5EN
4  Follow Steps 1 and 2 to close 
the battery/card cover.
2
1
  When using the camera, be sure to close and 
lock the battery/card cover.
 Charging the batter y
Connect the USB cable and USB-AC adapter to the 
camera and charge the battery.
For charging the battery abroad, see “Using your 
charger and USB-AC adapter abroad” (p. 70).
 
● The battery is not fully charged at shipment. Before 
use, be sure to charge the battery until the indicator 
lamp turns off (up to 3 hours).
 Connecting the camera Connecting the camera
AC outlet
USB cable 
(supplied)
Connector cover
Multi-connector
Indicator lamp
On: Charging
Off: Charged 
						

							6EN
When to charge the batteriesWhen to charge the batteriesCharge the battery when the error message shown 
below appears.
Battery Empty
Error message
Flashes in red
  Never use any cable other than supplied or  Olympus-designated USB cable. This may cause 
smoking or burning.
  The included F-2AC USB-AC adapter (hereafter referred to as USB-AC adapter) differs 
depending on the region where you purchased 
the camera. If you received a plug-in type USB-
AC adapter, plug it directly into AC outlet.
  The included USB-AC adapter has been designed to be used for charging and playback. 
Do not take pictures while the USB-AC adapter 
is connected to the camera.
  Be sure to unplug the power plug of the USB-AC adapter from the wall outlet when the charging is 
complete or the playback ends.
  For details on the battery, see “Battery Handling Precautions” (p. 78). For details on the USB-AC 
adapter, see “USB-AC adapter” (p. 79).
 
● If the indicator lamp does not light, check the USB 
cable and USB-AC adapter connections.  
● The battery can be charged while the camera is 
connected to the computer via USB. The charging 
time varies depending on the performance of the 
computer. (There may be cases in which it takes 
approx. 10 hours.) 
						

							7EN
 Turning on the camera and making the initial settings
When you turn on the camera for the fi  rst time, a 
screen appears enabling to set the language for the 
menus and messages displayed in the monitor, and 
the date and time.
To change the selected date and time, see “Setting 
the date and time d [X]” (p. 46).
1 Press the n button to turn 
on the camera, press FGHI 
of the arrow pad to select your 
language and press the  A button.
2 Press FG of the arrow pad to 
select the year for [Y].
XMENUBack
Y/M/D
Y M D Time
-- --
----:..2013
Date and time setting 
screen
3 Press I of the arrow pad to save 
the setting for [Y].
XMENUBack
Y/M/D
Y M D Time
----
----:..2013
4 As in Steps 2 and 3, press 
FGHI of the arrow pad to 
set [M] (month), [D] (day), [Time] 
(hours and minutes), and [Y/M/D] 
(date order), and then press the 
A button.
  For precise time setting, press the A button as 
the time signal strikes 00 seconds.
5 Press HI of the arrow pad to 
select time zone and then press 
the A button.
 
● Use FG to turn daylight saving time 
([Summer]) on or off.
Seoul
Tokyo
’13.02.26 12:30
SummerMENUBack 
						

							8EN
Learning how to use the camera
 
● Press the n button to turn on the camera and 
enter the standby mode. (Press the n button 
again to turn off the camera.) 
 
● Select the shooting mode, and press the shutter 
button to shoot a still image.
 
● To shoot a movie, press the R button. 
 
● Set the shooting functions using the function 
menu or the setup menu.
 
● To view images, press the q button to switch to 
playback mode.
 
● To return to standby mode, press the q button 
again, or press the shutter button halfway down 
and then release it. 
 
● Press and hold the  q button while the camera is 
turned off to start up the camera in the playback 
mode.
 
● In this case, pressing the q button again sets 
the camera to the standby mode.
 Shooting still images
1 Press the n button to turn on 
the camera.
2 Select the shooting mode. (p. 13)
3 Hold the camera and compose the 
shot.
  When holding the camera, take care not to cover 
the fl  ash, microphone or other important parts 
with your fi  ngers, etc.
  Take care so that the fl  ash window is not 
exposed to fi  ngerprints or dirt. 
						

							9EN
4  Press the shutter button halfway 
down to focus.
Press 
halfway
P
F3.4F3.4
1/4001/400
PP
AF target mark
Shutter  speed Aperture 
value
 
● The camera was unable to focus if the AF 
target mark fl  ashes red. Try focusing again.
5 To take the picture, gently press 
the shutter button all the way 
down while being careful not to 
shake the camera.
Press 
halfwayPress fully
 Using the zoom
Turning the zoom lever adjusts the shooting range.
Turn the zoom lever as far as it will go to speed up 
the zoom operation, and turn it partway for a slow 
zoom operation (not applicable when shooting a 
movie).
W side
T side
Image size Zoom bar
16M Super-resolution zoom*1
Optical zoom
Other *2
*1  For Super-resolution zoom, see [Super-Res Zoom] (p. 34).
*2  Due to increased processing of the pixel counts, the image quality will not degrade. The 
magni fi cation ratio changes depending on the 
image size setting. 
						

							10EN
Using the fl ash
The fl  ash functions can be selected to best match the 
shooting conditions.
1 Slide the  fl ash switch to raise the 
fl  ash.
To turn off the fl  ashTo turn off the fl ashPress the fl  ash down back into the camera.
2 Press I.
PPFlash Auto
0.00.0AUTOWBAUTOWBAUTOISOAUTOISO
MENUMENU16M:3
4
3 Use HI to select the setting 
option, and press the  A button 
to set.
Option Description
Flash AutoThe fl
 ash fi res automatically in 
low-light or backlight conditions.
Redeye Pre-fl
 ashes are emitted to reduce 
the occurrence of red eye in your 
photos.
Fill In The fl
 ash fi res regardless of the 
available light.
Flash Off The fl  ash does not fi re.