Olympus Camera Sp 720uz Ihs Instruction Manual

41EN
Retouching faces on still images Retouching faces on still images [Beauty Fix][Beauty Fix]
q (Playback Menu)  Edit  Beauty Fix
  Depending on the picture, the editing may not be 
effective.
1 Use  HI to select an image, and press the  Q button.
2 Use  FG to select a retouching item, and press the 
Q button.
3  Select [OK] or [Beauty Fix] on the review screen, and  press the Q button to save or to retouch the image 
additionally.
 
●The retouched image is saved as a separate 
image.
OKBeauty...

42EN
  When erasing pictures in the internal memory, do not insert the card into the camera. 
  Protected images cannot be erased.
To individually select and erase images To individually select and erase images [Sel. Image][Sel. Image]1 Use  FG to select [Sel. Image], and press the 
A button.
2 Use  HI to select the image to be erased, and press 
the A button to add a R mark to the image.
 
●Turn the zoom lever to the W end to display an 
index view. Images can be quickly selected using 
the FGHI...

43EN
Setting images to upload to Setting images to upload to Internet using OLYMPUS Viewer 2 Internet using OLYMPUS Viewer 2 [Upload Order][Upload Order]
q (Playback Menu)  Upload Order
1 Use HI to select an image.
2 Press the  A button.
 
●Press the A button again to cancel the settings.
3  If necessary, repeat Steps 1 and 2 to make settings  for other images, and press the   button.
 Only JPEG fi les can be ordered.  For details on uploading images, refer to OLYMPUS 
Viewer 2 “Help”. 

44EN
Menus for Other Camera SettingsMenus for Other Camera Settings
  The default settings of the function are highlighted in .
Using an Eye-Fi card [Eye-Fi]Using an Eye-Fi card [Eye-Fi]
d (Settings Menu 1)  Eye-Fi
Submenu 2ApplicationOff Disable Eye-Fi communication. 
On Enable Eye-Fi communication.
  When using an Eye-Fi card, read the Eye-Fi card 
instruction manual carefully, and comply with the 
instructions.
  Use the Eye-Fi card in compliance with the laws and regulations of the country where the...

45EN
Selecting a method for connecting Selecting a method for connecting the camera to other devices the camera to other devices [USB Connection][USB Connection]
d (Settings Menu 1)  USB Connection
Submenu 2Application
Auto When the camera is connected to 
another device, the settings selection 
screen is displayed.
Storage
Select when connecting the camera 
to a computer via a storage device.
MTP Select when transferring images 
without using the supplied [ib] (PC 
software) on Windows Vista/
Windows...

46EN
Selecting the camera sound and its volume [Sound Settings]Selecting the camera sound and its volume [Sound Settings]
d (Settings Menu 1)  Sound Settings
Submenu 2 Submenu 3Application
Sound Type
1/2/3 Selects the camera sounds (operation sounds, shutter sound, and 
warning sound).
Volume
0/1/2/3/4/5 Selects the operation volume of camera buttons.
q Volume0/1/2/3/4/5 Selects the image playback volume.
Resetting the fi
 le names of pictures [File Name]Resetting the fi le names of pictures [File Name]
d...

47EN
Adjusting the image processing Adjusting the image processing function [Pixel Mapping]function [Pixel Mapping]
d (Settings Menu 2)  Pixel Mapping
  This function has already been adjusted at factory shipping, and no adjustment is needed right 
after purchase. Approximately once a year is 
recommended.
  For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. 
If the camera is turned off during pixel mapping, be 
sure to perform it again.
To...

48EN
To play back camera images on a TVTo play back camera images on a TV 
●Connection via AV cable
1  Use the camera to select the same video signal system as the one of conn\
ected TV ([NTSC]/[PAL]).
2  Connect the TV and camera.
Connect to the TV video input 
jack (yellow) and audio input 
jack (white).
Multi-connector
AV cable (supplied)
Open the connector cover in 
the direction of the arrow.
 
●Connection via HDMI cable
1  On the camera, select the digital signal format that will be connected (\...

49EN
  For details on changing the input source of the TV, refer to the TV’s instruction manual.  When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority.  Depending on the TV’s settings, the displayed images and information may become cropped.
To operate images with the TV remote controlTo operate images with the TV remote control1 Set [HDMI Control] to [On], and turn off the camera.
2  Connect the camera and TV with an HDMI cable. “Connection via...

50EN
Setting the date and time [Setting the date and time [XX]]
d (Settings Menu 2)  X
  “Language, date, time and time zone” (p. 15)
To check the date and timeTo check the date and timePress the INFO button while the camera is turned off. The 
current time is displayed for approx. 3 seconds.
Choosing home and alternate time Choosing home and alternate time zones [World Time]zones [World Time]
d (Settings Menu 2)  World Time
  You will not be able to select a time zone using [World Time] if the camera...