OKI MC860dn User Manual

MFP overview > 11
Rear view
REF.DESCRIPTION
14 Access panel  
Allows access to the hard disk drive (HDD) and to install optional memory.
15 O N/OFF power switch  
Refer to “Switching Off” on page 16 for de tails. Always follow the correct procedure 
to ensure that no HDD data is lost.
16 AC power socket
17 Parallel connector
18 USB connector (type A)  
19 Test switch  
20 Network connection  
21 Status LEDs  
22 USB connection (type B)
23 Duplex unit
24 Rear, face up stacker
This is mainly used for...

MFP overview > 12
Control Panel
REF.DESCRIPTION
1.  Touch screen display
Enables you to make selections associated with the copying, faxing and scanning 
functions by touching the screen to press selected buttons.
Caution! Be careful not to scratch the di splay with sharp or pointed objects e.g. 
a ballpoint pen as this may damage the display.  
2.  Contrast Dial
Allows you to adjust the screen contrast as required.
3.  Main function buttons
COPY: Pressing this button selects copy mode on the touch...

MFP overview > 13
7. STOP/START buttons
STOP: Pressing this button stops the copying or scanning process.
START :
> MONO  - Starts the copying, faxing or scanning process in black & white.
> COLOR  - Starts the copying or scanning process in color.
If the LED above the button is not lit, that f unction is not available, e.g only the Mono 
button LED illuminates when faxing (color faxing is not possible).
8.  INTERRUPT : Pressing this button switches the interrupt mode on or off. Its LED is lit 
when...

MFP overview > 14
Changing the Display Language
The default language used by your MFP for display messages and for report printing is 
English
1. If required, this can be chan ged using the Panel Language Setup utility.             
1. To ensure your product contains the latest firmwa re updates, it is recommended that you download 
the language files from th is utility during setup.
Downloaded From ManualsPrinter.com Manuals 

Getting started > 15
Getting started
Releasing the Scanner Locks
1.Using the key (1) provided, turn the sca nner lock to the UNLOCKED position.
2. Repeat step 1 for the second scanner lock.
3. Place the key (1) on the hook at the  rear of the scanner for safe keeping.
4. Fit plugs (2) in the scanner lock locations as shown.
CAUTION!
Make sure the scanner is in  the UNLOCKED position before 
operating.
1
2
Downloaded From ManualsPrinter.com Manuals 

Getting started > 16
5.Switch the unit on and turn  the mirror carriage mode off:
(a) Press the  Setup button on the control panel.
(b) Touch the  Admin Setup button and enter the admin password (the default is 
aaaaaa). Refer to “Pre-configuration Information” on page 25.
(c) Touch the  User Install button.
(d) Using the right hand arrow button, navigate to  Mirror Carriage mode. Touch 
the  Mirror Carriage mode  button and follow the on -screen instructions to 
unlock.
Power Save Mode
If you do not...

Getting started > 17
Installing Drivers and Utilities
Your machine is supplied with the following drivers:
• TWAIN driver (only use when connecting to the unit via USB)
• Printer driver: PCL5c, PCL 6, PostScript3
•Fax driver
Twain and Printer Drivers
The TWAIN driver is used for “Pull Scanning”,  i.e. initiating a scan from your PC via 
software. Compare this to “Push Scanning” wh ere you start the scan by pressing a button 
on the units front panel. The TWAIN driver  only works via USB connections to a...

Getting started > 18
Configuration Tool
Installation of the Configuration tool is optional and can be found on the Driver/Utilities CD 
under the Utilities folder. Follow the on-scree n instructions to complete the Configuration 
tool installation.
The Configuration tool can discover devices ov er USB or network connections. This only 
detects MC860 devices.
1. To search and install, select  Tools > Register Device.
2. Highlight the required search  result and when prompted click  Yes.
The Configuration...

Getting started > 19
Actkey Utility
The Actkey utility enables the unit to receive one key touch commands from a locally 
connected Windows computer.
Installation of the Actkey utility is optional.  It can be found on the Driver/Utilities CD under 
the Utilities folder.
Information on using the Actkey utility can  be found in “Scan to Local PC” on page 101.
Setting up the Actkey Utility
1.Install the Actkey utility from the CD:
Set-up will place an “Actke y” icon on your desktop.
2. Double-click this...

Getting started > 20
Paper Recommendations
Your unit will handle a variety of print media, including a range of paper weights and sizes, 
transparencies and envelopes. This section prov ides general advice on choice of media, and 
explains how to use each type.
The best performance will be obtained when us ing standard 20 to 24 lb. US Bond (75 to 90 
g/m²) paper designed for use in copiers and lase r printers. Use of heavily embossed or very 
rough textured paper is not recommended.
Pre-printed...