OKI MC160n User Manual

NETWORK SETTING Menu1-5
LDAP SETTING DISABLE/ENABLE
LDAP SERVER 
ADDR.
LDAP PORT NO.
SSL SETTING
SEARCH BASE
ATTRIBUTE
SEARCH METHOD
LDAP TIMEOUT
MAX. SEARCH 
RESULTS
AUTHENTICATION
LDAP ACCOUNT
LDAP PASSWORD
DOMAIN NAME
Downloaded From ManualsPrinter.com Manuals 

NETWORK SETTING Menu 1-6
USB SETTING
COMM. SETTING
USER SETTING
AUTO REDIAL
Downloaded From ManualsPrinter.com Manuals 

NETWORK SETTING Menu1-7 Accessing the Network Setting Menu
Use the following series of keystrokes at the machine to access the Network 
Setting menu options on your machine. This menu provides access to all of 
the configurable network items.
Using the Network Setting Menu Options
If the machine is connected to a network, the following settings should be 
specified. For details about each setting, contact your network administrator.
To manually specify settings for the IP address, subnet mask and...

NETWORK SETTING Menu 1-8
TCP/IP
IP ADDR. SETTING
PurposeEnables or disables TCP/IP.
 If 
ENABLE is selected, TCP/IP is enabled.
 If 
DISABLE is selected, TCP/IP is disabled.
OptionsDISABLE/ENABLE
DefaultENABLE
PurposeSets the IP address of this machine on the network.
Sets the subnet mask of the network. The subnet mask 
allows you to limit access to your machine (for example, 
according to departmental divisions).
Sets the address of the router/gateway when a router/gate-
way is used on your network and...

NETWORK SETTING Menu1-9
DNS CONFIG.
When using network scanning and when specifying the SMTP server 
as a host name instead of as an IP address, be sure to select 
ENABLE, and then specify the IP address of the DNS server.
DHCP
PurposeSets whether or not the DNS server setting is to be speci-
fied.
If specifying the DNS server setting, the SMTP server can 
be specified as a host name when using network scanning.
If ENABLE is selected, type in the IP address of the DNS 
server.
If DISABLE is selected,...

NETWORK SETTING Menu 1-10
BOOTP
ARP/PING
HTTP
FTP
PurposeIf there is a BOOTP server on the network, specifies 
whether the IP address and other network information is 
automatically assigned by the BOOTP server. 
OptionsDISABLE/ENABLE
DefaultDISABLE
PurposeIf the IP address cannot be acquired due to the DHCP or 
BOOTP address and if a fixed IP address cannot be 
acquired, the destination IP address of the ICMP (Ping) 
packet previously received by the machine can be acquired 
as the IP address of the...

NETWORK SETTING Menu1-11
SMB
BONJOUR
IPP
SLP
PurposeSelect whether or not to enable SMB.
If ENABLE is selected, SMB is enabled.
If DISABLE is selected, SMB is disabled.
OptionsDISABLE/ENABLE
DefaultENABLE
PurposeSelect whether or not to enable Bonjour. 
If ENABLE is selected, Bonjour is enabled. 
If DISABLE is selected, Bonjour is disabled.
OptionsDISABLE/ENABLE
DefaultENABLE
PurposeSelect whether or not to enable IPP.
If ENABLE is selected, IPP is enabled. 
If DISABLE is selected, IPP is disabled....

NETWORK SETTING Menu 1-12
SNMP
SPEED/DUPLEX
PurposeSelect whether or not to enable SNMP.
If ENABLE is selected, SNMP is enabled.
If DISABLE is selected, SNMP is disabled.
OptionsDISABLE/ENABLE
DefaultENABLE
PurposeSpecifies the transmission speed for the network and the 
transmission method for bi-directional transmission.
Options
AUTO
10BASE-T FULL
10BASE-T HALF
100BASE-TX FULL
100BASE-TX HALF
DefaultAUTO
Downloaded From ManualsPrinter.com Manuals 

Network Printing
Downloaded From ManualsPrinter.com Manuals 

Network Connection 2-2
Network Connection
Theory
To connect your machine in a TCP/
IP network environment, you must 
make sure that the internal net-
work addresses in the machine 
have been set. 
In many cases, you have to 
enter only a unique IP 
address. However, you may 
also have to enter a subnet 
mask and/or a gateway 
(router) address, depend-
ing on your network config-
uration requirements.
M
Downloaded From ManualsPrinter.com Manuals