OKI MC160n User Manual

							NETWORK SETTING Menu1-5
LDAP SETTING DISABLE/ENABLE
LDAP SERVER 
ADDR.
LDAP PORT NO.
SSL SETTING
SEARCH BASE
ATTRIBUTE
SEARCH METHOD
LDAP TIMEOUT
MAX. SEARCH 
RESULTS
AUTHENTICATION
LDAP ACCOUNT
LDAP PASSWORD
DOMAIN NAME
Downloaded From ManualsPrinter.com Manuals 
						

							NETWORK SETTING Menu 1-6
USB SETTING
COMM. SETTING
USER SETTING
AUTO REDIAL
Downloaded From ManualsPrinter.com Manuals 
						

							NETWORK SETTING Menu1-7 Accessing the Network Setting Menu
Use the following series of keystrokes at the machine to access the Network 
Setting menu options on your machine. This menu provides access to all of 
the configurable network items.
Using the Network Setting Menu Options
If the machine is connected to a network, the following settings should be 
specified. For details about each setting, contact your network administrator.
To manually specify settings for the IP address, subnet mask and 
gateway, set 
IP ADDR. SETTING to SPECIFY.
When entering the IP address, do not enter a class D (between 
224.0.0.0 and 239.255.255.255) or class E (between 240.0.0.0 and 
255.255.255.255) IP address.
In addition, “255” cannot be entered as the last three digits of the IP 
address. Press this 
key . . .(until) the message window reads . . .
 UTILITY
MACHINE SETTING
 ADMIN. MANAGEMENT
Use the keypad to input 6-digits administrator number.
ADMINISTRATOR NO.
 NETWORK SETTING
Downloaded From ManualsPrinter.com Manuals 
						

							NETWORK SETTING Menu 1-8
TCP/IP
IP ADDR. SETTING
PurposeEnables or disables TCP/IP.
 If 
ENABLE is selected, TCP/IP is enabled.
 If 
DISABLE is selected, TCP/IP is disabled.
OptionsDISABLE/ENABLE
DefaultENABLE
PurposeSets the IP address of this machine on the network.
Sets the subnet mask of the network. The subnet mask 
allows you to limit access to your machine (for example, 
according to departmental divisions).
Sets the address of the router/gateway when a router/gate-
way is used on your network and you allow users outside 
your network environment to print on your machine.
OptionsAUTO/SPECIFY
DefaultAUTO
(If IP ADDR. SETTING is set to SPECIFY)
IP ADDRESS: 0.0.0.0
SUBNET MASK: 255.255.255.0
GATEWAY: 0.0.0.0
Range(If IP ADDR. SETTING is set to SPECIFY)
0-255 for each xxx triplet
Use the keypad to input each number; use the   and   
keys to move between triplets.
NotesA single digit number, such as “1”, cannot be input as “001”. 
Align the number on the left and input “1” as “1 _ _”. Use 
the   and   keys to move between triplets.
The B
ACK key can also be used for deleting. To cancel IP 
Address menu, hold down the B
ACK key for more than one 
second, and then press the B
ACK key again after all set-
tings have been cleared.
Downloaded From ManualsPrinter.com Manuals 
						

							NETWORK SETTING Menu1-9
DNS CONFIG.
When using network scanning and when specifying the SMTP server 
as a host name instead of as an IP address, be sure to select 
ENABLE, and then specify the IP address of the DNS server.
DHCP
PurposeSets whether or not the DNS server setting is to be speci-
fied.
If specifying the DNS server setting, the SMTP server can 
be specified as a host name when using network scanning.
If ENABLE is selected, type in the IP address of the DNS 
server.
If DISABLE is selected, the DNS server cannot be refer-
enced.
OptionsDISABLE/ENABLE
DefaultDISABLE
Range(If DNS CONFIG. is set to ENABLE)
0-255 for each xxx triplet
Use the keypad to input each number; use the   and   
keys to move between triplets.
NotesA single digit number, such as “1”, cannot be input as “001”. 
Align the number on the left and input “1” as “1 _ _”. Use 
the   and   keys to move between triplets.
The B
ACK key can also be used for deleting. To cancel DNS 
CONFIG. menu, hold down the BACK key for more than 
one second, and then press the B
ACK key again after all 
settings have been cleared.
After changing the settings, the machine must be turned 
off, then on again.
PurposeIf there is a DHCP server on the network, specifies whether 
the IP address and other network information is automati-
cally assigned by the DHCP server. 
OptionsDISABLE/ENABLE
DefaultENABLE
Downloaded From ManualsPrinter.com Manuals 
						

							NETWORK SETTING Menu 1-10
BOOTP
ARP/PING
HTTP
FTP
PurposeIf there is a BOOTP server on the network, specifies 
whether the IP address and other network information is 
automatically assigned by the BOOTP server. 
OptionsDISABLE/ENABLE
DefaultDISABLE
PurposeIf the IP address cannot be acquired due to the DHCP or 
BOOTP address and if a fixed IP address cannot be 
acquired, the destination IP address of the ICMP (Ping) 
packet previously received by the machine can be acquired 
as the IP address of the machine.
If ENABLE is selected, the IP address can be acquired auto-
matically.
If DISABLE is selected, the IP address cannot be acquired 
automatically.
OptionsDISABLE/ENABLE
DefaultDISABLE
PurposeSelect whether or not to enable HTTP. 
If ENABLE is selected, HTTP is enabled. 
If DISABLE is selected, HTTP is disabled.
OptionsDISABLE/ENABLE
DefaultENABLE
PurposeSelect whether or not to enable FTP server. 
If ENABLE is selected, FTP server is enabled. 
If DISABLE is selected, FTP server is disabled.
OptionsDISABLE/ENABLE
DefaultENABLE
Downloaded From ManualsPrinter.com Manuals 
						

							NETWORK SETTING Menu1-11
SMB
BONJOUR
IPP
SLP
PurposeSelect whether or not to enable SMB.
If ENABLE is selected, SMB is enabled.
If DISABLE is selected, SMB is disabled.
OptionsDISABLE/ENABLE
DefaultENABLE
PurposeSelect whether or not to enable Bonjour. 
If ENABLE is selected, Bonjour is enabled. 
If DISABLE is selected, Bonjour is disabled.
OptionsDISABLE/ENABLE
DefaultENABLE
PurposeSelect whether or not to enable IPP.
If ENABLE is selected, IPP is enabled. 
If DISABLE is selected, IPP is disabled.
OptionsDISABLE/ENABLE
DefaultENABLE
PurposeSelect whether or not to enable SLP. 
If ENABLE is selected, SLP is enabled.
If DISABLE is selected, SLP is disabled.
OptionsDISABLE/ENABLE
DefaultENABLE
Downloaded From ManualsPrinter.com Manuals 
						

							NETWORK SETTING Menu 1-12
SNMP
SPEED/DUPLEX
PurposeSelect whether or not to enable SNMP.
If ENABLE is selected, SNMP is enabled.
If DISABLE is selected, SNMP is disabled.
OptionsDISABLE/ENABLE
DefaultENABLE
PurposeSpecifies the transmission speed for the network and the 
transmission method for bi-directional transmission.
Options
AUTO
10BASE-T FULL
10BASE-T HALF
100BASE-TX FULL
100BASE-TX HALF
DefaultAUTO
Downloaded From ManualsPrinter.com Manuals 
						

							Network Printing
Downloaded From ManualsPrinter.com Manuals 
						

							Network Connection 2-2
Network Connection
Theory
To connect your machine in a TCP/
IP network environment, you must 
make sure that the internal net-
work addresses in the machine 
have been set. 
In many cases, you have to 
enter only a unique IP 
address. However, you may 
also have to enter a subnet 
mask and/or a gateway 
(router) address, depend-
ing on your network config-
uration requirements.
M
Downloaded From ManualsPrinter.com Manuals