OKI MB260 User Manual

MB260
- 21 -
Copy
Top and bottom printing margins setup
If you want to, you can offset the lateral margins of the 
document towards the top or the bottom during printing.
! 856 - ADVANCED FCT/SCAN. & PRINT/TOP 
PRINT.
1Press !, enter 856 using the keypad.
2Setup the top / bottom margins offsets (by 0.5 mm 
steps) with the buttons  and !.
3Confirm by pressing the OK button.
4Quit this menu by pressing the   button.
Format paper setup
This menu allows you to define the default paper format 
of the manual...

MB260
- 22 -
Parameters/Setup
Parameters/
Setup
You can setup your machine as you like depending on the 
use. You will find in this chapter description of the 
functions.
You can print the functions guide and the available setup 
of your multifunction machine.
Language
This setting enables you to choose the menu language of 
your choice. By default, the multifunction machine is set 
to English.
To select the language:
!203 - SETUP / GEOGRAPHICAL / LANGUAGE
1Press !, enter 203 using the keypad.
2Select...

MB260
- 23 -
Parameters/Setup
2Enter your lock code (4 digits) with the keyboard, 
confirm with OK.
3Enter again your lock code (4 digits) with the 
keyboard, confirm with OK.
4Quit this menu by pressing the   button.
Lock the keyboard
Every time you use your machine, you will have to enter 
your code.
!812 - ADVANCED FCT / LOCK / LOCK KEYBD.
1Press !, enter 812 using the keypad.
2Enter the four-digit locking code with the keypad.
3Press OK to confirm.
4With the buttons ! or , choose ON and confirm 
with...

MB260
- 24 -
 Network features
Network features
You may connect your multifunction terminal to a wireless 
network.
However, practical knowledge of your computer 
configuration is required to set up a network.
You can connect your machine to a PC using a USB cable 
or make a wireless connection (via radio) with a PC or 
network.
Type of radio network
A radio network or WLAN (Wireless Local Area Network) 
is created when at least two computers, printers or other 
peripheral devices communicate with each...

MB260
- 25 -
 Network featuresConnect your WLAN adaptor
Your machine belongs to a new generation of terminals 
that you can incorporate into a WLAN network using a 
WLAN USB key.
1Plug your WLAN USB key into the USB port of your 
machine.
Configure your network
Creating or rejoining a network
Before attempting to use a WLAN adaptor on your 
machine, you must enter the parameters that will allow a 
WLAN network to recognise your machine.
On your machine you will find simple instructions 
that guide you...

MB260
- 26 -
 Network features
8 IP CONF.: MANU or IP CONF.: AUTO appear on 
the screen. 
If you choose to set up the system manually, go to 
the next paragraph and enter the parameters 
IP ADDRESS, SUBNET MASK and GATEWAY.
9At the end of this procedure, you return to the main 
menu of CONFIG. ASS.
10Exit this menu by pressing the 
 key.
Once the network has been set up, the LED of the WLAN 
USB key should be on.
Referring to or changing your 
network parameters
Each of the parameters of your network may...

MB260
- 27 -
 Network features
! 2827 - SETUP /  WLAN  / PARAMETERS  / SECURITY
This parameter allows you to make your network secure 
by setting the encryption method to use in your WLAN 
network.
1Type in !, select the menu SETUP using the keys 
! or  and confirm with OK.
2Select WLAN using the keys ! or  and confirm 
with OK.
3Select PARAMETERS using the keys ! or  and 
confirm with OK.
4Select SECURITY using the keys ! or  and 
confirm with OK.
5Choose WEP, WPA or OFF and confirm with OK.
- If you...

MB260
- 28 -
 Network features
Setting up the PC
For this section, refer to the instructions supplied by the 
manufacturer of the WLAN USB key to help you to find 
and join the house network.
1You may need to install the software for the WLAN 
USB key on the PC, if this has not already been 
done. 
2Plug WLAN USB key into a USB port on the PC.
3Use the software of the WLAN USB key to detect 
the network.
4Join the network house once this has been 
detected.
5Now set up the WLAN network connection of your...

MB260
- 29 -
USB memory key
USB memory key
You can connect a USB memory Key on the front side of 
your machine. The files stored in TXT, TIFF and JPEG 
formats will be analysed and you will be able to use the 
following actions:
- print the stored files contained in your USB memory 
key
1,
- delete the files contained in your USB memory key,
- run an analysis on the contents of the inserted USB 
memory key,
- digitalise a document on your USB memory key.
Use of the USB memory key
Print your documents
You...

MB260
- 30 -
USB memory key
-SELECTION, to print one or several files 
located in the USB memory key. 
Select with the ! or  buttons the file to print 
and confirm with OK. A star (*) appears on the 
left side of the file. 
Repeat this step for each file you want to print. 
Press the   button.  
COPIES NUMBER appears on the screen, 
enter the desired number of copies with the 
numerical keypad and confirm with OK. 
 
Select the printing format (for JPEG files): A4 or 
LETTER (depending on model), or...