OKI C9600HDN User Manual

							C9600 User’s Guide> 101
2.Turn the knob in the direction indicated until the coloured 
indicator appears.
3.Remove any paper that awaits stapling in the paper 
ejection area.
4.Pull out the staple unit.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 102
5.Turn the knob in the direction indicated to move the 
stapler to the front.
6.Grip both sides of the staple cartridge, pull it up and 
remove it.
7.Raise the staple cartridge gate.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 103
8.Remove all staples that are emerging from the staple 
case.
9.Return the staple cartridge gate to its original position.
10.Refit the staple cartridge.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 104
11.Ensure that the staple cartridge is securely installed back 
into the staple unit then push the staple unit fully home.
12.Close the Finisher front cover, being careful not to trap 
your fingers.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 105
SPECIFICATIONS
ITEMSPECIFICATION
Dimensions 655x620x462mm (WxDxH)
Weight Without options, approx. 76kg
Print speeds 36 ppm colour; 40 ppm monochrome
Resolution 1200 x 600 dpi
Emulations PCL 5c, PCL XL 2.1, PS, IBM PPR, Epson FX
Memory C9600n: 256 MB, expandable
C9600dn, C9600hdn, C9600hdtn: 512 MB 
expandable,
Maximum: 1024 MB
Paper input 
at 80g/m²Trays 1 – 5: 530 sheets A4 each
MP Tray: 230 sheets A4
Paper weight 64 – 268g/m²
Paper output Face-down stacker: 500 sheets
Face-up stacker: 250 sheets
Interfaces Parallel, USB 2.0, 10Base-T and 100Base-TX
Duty cycle 150,000 pages/month maximum
Toner life 15,000 A4 pages @ 5% coverage
Image drum life 30,000 A4 pages
Belt life 100,000 A4 pages
Fuser life 100,000 A4 pages
Waste toner container 
life30,000 A4 pages at 5% coverage
Power rating 220 – 240 VAC, 50/60 Hz 6A
Power consumption Operating: 1,500 W maximum, 750 W typical
Standby: 1,300 W maximum, 200 W typical
Power save: 
						

							C9600 User’s Guide> 106 Noise level Operating: 54dBA maximum
Standby: 40dBA maximum
Power save: 40dBA maximum after 30 mins 
background level
ITEMSPECIFICATION
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 107
APPENDIX A – LCD MESSAGES
The LCD panel messages are intended to be self-explanatory. 
Representative messages are given as examples below.
MESSAGECOMMENT
Ready to Print Your printer is online and ready to print.
Printing tttttt Your printer is printing and paper is currently being 
fed from tttttt, where tttttt identifies a tray.
tttttt Near End The paper supply in the tray identified by tttttt will 
run out soon.
cccccc Toner Low The remaining toner of colour cccccc is running low.
Fuser Unit Near Life The fuser unit is nearing the end of its working life.
Change Fuser Unit The fuser unit has reached the end of its working 
life and has to be changed.
Inverter is Removed The Inverter unit has been separated from the 
printer and all Finisher functions are disabled. 
(Finisher/Inverter is an optional accessory.)
Invalid Data 
Press ONLINE ButtonInvalid data has been received by the printer. Press 
the ONLINE button to clear this warning.
Change Paper in tttttt 
mmmmmm 
pppppp 
Press ONLINE button 
Please see HELP for 
detailsThere is a mismatch between the media in the tray 
and print data. 
Load media of size mmmmmm and type pppppp 
into tray tttttt. The message may remain for some 
time after you have closed the tray.
You can have the printer ignore this error for the 
current print job by pressing the ONLINE button.
You can access help details by pressing the HELP 
button.
Install Paper 
tttttt 
mmmmmm 
Please see HELP for 
detailsThe printer has tried to take paper from an empty 
tray. 
Load media of size mmmmmm into tray tttttt. The 
message may remain for some time after you have 
closed the tray.
You can access help details by pressing the HELP 
button.
Install Tray 
ttttttThe printer has tried to take paper from a tray that 
has been removed. 
Ensure that tray tttttt is correctly located or put tray 
tttttt loaded with paper back into the printer.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 108 Open Cover 
Paper Remains 
tttttt 
Please see HELP for 
detailsAdditional paper has been detected after a paper 
jam has been cleared. 
Open tttttt side cover to check for additional paper.
You can access help details by pressing the HELP 
button.
Check Image Drum 
cccccc 
Please see HELP for 
detailsCheck that the image drum of colour cccccc is 
correctly installed.
You can access help details by pressing the HELP 
button.
MESSAGECOMMENT
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 109
APPENDIX B – MENU SYSTEM
The top-level Functions menus are: 
>Configuration
>Print Information
>Print Secure Job
>Menus
>Admin Setup
>Calibration
>Print Statistics
The two other special top-level menus are:
>Boot Menu
>System Maintenance
The following tables summarise the Configuration, Print 
Information, Print Secure Job and Menus menu trees and provide 
some usage examples. The menu trees are given to the lowest 
menu item level. Typically, this can be a parameter that can be 
set by selecting from a range of values provided or a command 
that can be executed to display or print a status or setting value.
Emboldened values followed by an (A) denote default values 
associated with locations where A4 is default paper size. 
Emboldened values followed by an (L) denote default values 
associated with locations where Letter is default paper size. 
Emboldened values followed by neither (A) nor (L) denote 
common defaults.
Certain menus and items associated with, for example, the 
Finisher appear only if the associated hardware is installed or 
under certain conditions.
The remainder of the menus above are intended for more 
specialised usage and are not described further here. For full 
details of using all menus to configure and use the printer, refer 
to the Configuration Guide.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 110
CONFIGURATION
PRINT PAGE COUNT
FINISHER COUNT
ITEMVALUEDESCRIPTION
Colour Page  nnnnnn  Displays number of 
colour printed pages 
converted to A4 
equivalent.
Monochrome 
Page nnnnnn  Displays number of 
monochrome printed 
pages converted to A4 
equivalent.
Traym  nnnnnn  Displays total printed 
pages from Traym, 
where m is in range 1 to 
5. 
MP Tray  nnnnnn  Displays total printed 
pages from MP tray. 
ITEMVALUEDESCRIPTION
Staple  nnnnnn Displays total pages 
stapled.
Punch  nnnnnn  Displays total pages 
punched.
Finisher  nnnnnn  Displays total pages 
ejected into the Finisher.
Downloaded From ManualsPrinter.com Manuals