OKI C9600HDN User Manual

C9600 User’s Guide> 81
6.Remove any jammed paper.
7.In similar manner, check for and clear any paper jammed 
under the rear top cover.
Downloaded From ManualsPrinter.com Manuals 

C9600 User’s Guide> 82
8.Replace the two top covers.
9.Push the duplex unit back into position.
Downloaded From ManualsPrinter.com Manuals 

C9600 User’s Guide> 83
10.If you detached a Finisher unit to gain access to the 
duplex unit, replace the Finisher unit.
Downloaded From ManualsPrinter.com Manuals 

C9600 User’s Guide> 84
PAPER JAMS – FINISHER (OPTIONAL ACCESSORY)
CHECK FINISHER, PAPER JAM/PAPER REMAINS
Use the Help button on the printer control panel to check the 
number displayed. You will need this to be able to clear the paper 
jam. The following paragraphs explain what to do for each of the 
indicated numeric codes.
591, 592, 593, 599/ 643, 645 (PAPER JAM AROUND FINISHER)
1.Remove any paper at the Finisher paper exit.
Downloaded From ManualsPrinter.com Manuals 

C9600 User’s Guide> 85
2.Operate the Finisher lever (1) and move the Finisher away 
from the Inverter.
3.Open the Finisher top cover.
1
Downloaded From ManualsPrinter.com Manuals 

C9600 User’s Guide> 86
4.Carefully remove any jammed paper.
5.Close the Finisher top cover.
6.Move the Finisher back into position and connect it to the 
Inverter.
Downloaded From ManualsPrinter.com Manuals 

C9600 User’s Guide> 87
594, 597, 598/ 644, 646 (PAPER JAM IN FINISHER)
1.Operate the Finisher lever (1) and move the Finisher away 
from the Inverter.
2.Open the Finisher front cover (2).
1
2
Downloaded From ManualsPrinter.com Manuals 

C9600 User’s Guide> 88
3.Continue to turn the lower knob (3) clockwise until any 
jammed paper is completely ejected.
4.Remove the ejected paper.
5.Close the Finisher front cover.
3
Downloaded From ManualsPrinter.com Manuals 

C9600 User’s Guide> 89
6.Open the Finisher right side cover.
7.Carefully remove any jammed paper.
8.Close the Finisher right side cover.
Downloaded From ManualsPrinter.com Manuals 

C9600 User’s Guide> 90
9.Move the Finisher back into position and connect it to the 
Inverter.
590 (PAPER JAM IN FINISHER/PUNCH UNIT)
1.Operate the Finisher lever (1) and move the Finisher away 
from the Inverter.
1
Downloaded From ManualsPrinter.com Manuals