OKI C9600DN User Manual

							C9600 User’s Guide> 71
2.Pull the release lever (2) and pull open the side cover.
3.Carefully remove the jammed paper.
2
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 72
4.Close the side cover.
OPEN COVER, PAPER JAM, TOP COVER
1.Squeeze the top cover handle (1) and open the top cover.
1
WARNING!
Be careful not to touch the fuser unit which is hot after 
printing.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 73
2.Squeeze the basket handle (2) and raise the drum basket.
3.Carefully remove any paper on the belt.
4.If paper is jammed in the fuser unit, push the lock lever 
(3) in the direction shown to release the unit.
WARNING!
Be careful not to touch the fuser unit which may be hot 
after printing. If the fuser unit is hot, wait until it cools 
before attempting to remove any jammed paper.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 74
Holding the fuser unit (4) by the handle, lift it out of the 
printer and place it on a flat surface.
5.Pull up the jam release levers (5) and remove the jammed 
paper.
4
3
5
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 75
6.Carefully replace the fuser unit into the printer and turn 
the lock lever (6) in the direction shown to lock the fuser 
unit.
7.If paper is jammed near the paper exit, open the face-up 
stacker (7).
6
7
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 76
8.Open the side cover (paper exit) (8) and remove the 
jammed paper.
9.Close the side cover (paper exit) and then the face-up 
stacker.
8
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 77
10.Return the image drum basket (9) into position and check 
it is locked.
11.Close the top cover and ensure it is latched.
9
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 78
PAPER JAMS – DUPLEX UNIT (IF INSTALLED)
CHECK DUPLEX UNIT, PAPER JAM
1.If a Finisher unit is attached to your printer, operate the 
lever (1) of the Inverter unit to separate the Inverter from 
the printer.
1
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 79
2.Operate the duplex cover release button (2) and open the 
cover.
3.Carefully remove any jammed paper then close the cover.
2
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 80
4.Operate the levers (3) and pull out the duplex unit.
5.Holding the front top cover by the grip (4), push it gently 
inwards and raise it.
3
3
4
Downloaded From ManualsPrinter.com Manuals