OKI C9600DN User Manual

							C9600 User’s Guide> 21
PRINTER AND PAPER OVERVIEW
OPENING AND CLOSING THE TOP COVER
To open the top cover, squeeze the top cover handle (1) to 
release the catch and raise the cover.
CAUTION!
To gain access to the inside of the printer, ensure that 
the top cover is fully opened. 
1
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 22
To close the top cover, push gently (1) until the cover stops 
midway and then push harder (2) to close the cover completely. 
Ensure that the cover is securely closed.
1
2
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 23
IDENTIFYING MAJOR COMPONENTS
The major components of your printer are identified in the 
representations below.
1.Paper holding arm
2.Top cover (face-down stacker)
3.MP Tray (multi-purpose tray)
4.Tray 1 side cover
5.Paper size label
6.Paper volume indicator
7.Tray 1 (paper tray)
8.Control panel
9.To p  c o v e r  h a n d l e
1
2
3
456
7 8
9
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 24
10.Face-down stacker
11.Power (on/off) switch
12.Face-up stacker
12
1110
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 25
13.Interface unit
14.Network interface connector
15.Parallel interface connector
16.USB interface connector
17.Power connector
18.Ventilation holes
131
4
15
16
17 18
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 26
19.Image drum cartridge and toner cartridge (Cyan)
20.Image drum cartridge and toner cartridge (Magenta)
21.Image drum cartridge and toner cartridge (Yellow)
22.Image drum cartridge and toner cartridge (Black)
23.Toner cartridge
24.Image drum cartridge
25.Fuser unit
26.LED heads
25
19
20
21
22
23
24 26
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 27
27.Belt unit
28.Drum basket handle
29.Drum basket
30.Duplex unit
31.High Capacity Feeder (HCF), three trays
27 28 29
30
31
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 28
SOFTWARE SUPPLIED
CDs:
>CD1 – Drivers and Utilities
Contains driver and application software for use by a 
general user.
>CD2 – Network and Administrator Utilities
Contains software for use by system administrators.
>CD3 – User’s Guides
Contains documentation in electronic form (for example, 
the User’s Guide and Printing Guide) to describe how to use 
the printer for day-to-day printing tasks.
PAPER RECOMMENDATIONS
Your printer will handle a variety of print media, including a range 
of paper weights and sizes, transparencies and envelopes. This 
section provides general advice on choice of media, and explains 
how to use each type.
The best performance will be obtained when using standard 
weight 75 – 90g/m² paper designed for use in copiers and laser 
printers. Suitable types are:
>Arjo Wiggins Colour Solutions 90g/m²
>Colour Copy by Neusiedler
Use of heavily embossed or very rough textured paper is not 
recommended.
Pre-printed stationery can be used, but the ink must not offset 
when exposed to the high fuser temperatures used in the printing 
process.
Envelopes s h o u l d  b e  f r e e  f r o m  t w i s t ,  c u r l  o r  o t h e r  d e f o r m a t i o n s .  
They should also be of the rectangular flap type, with glue that 
remains intact when subjected to hot roll pressure fusing used in 
this type of printer. Window envelopes are not suitable.
Transparencies should be of the type designed for use in 
copiers and laser printers. In particular, avoid office 
transparencies designed for use by hand with marker pens. 
These will melt in the fuser and cause damage.
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 29
Labels should also be of the type recommended for use in 
copiers and laser printers, in which the base carrier page is 
entirely covered by labels. Other types of label stock may 
damage the printer due to the labels peeling off during the 
printing process. Suitable types are:
>Avery White Laser Label types 7162, 7664, 7666 (A4), or 
5161 (Letter)
>Kokuyo A693X series (A4) or A650 (B5)
PAPER INPUT AND OUTPUT INFORMATION
The following table relates paper parameters to input trays 
(Tray 1 to Tray 5 (numbering from the top) and MP Tray) and to 
output areas (Face-down stacker and Face-up stacker).
TYPESIZEWEIGHTINPUT/
OUTPUT
Plain  paper A3, A3 Nobi, A3 Wide, 
A4, A5, A6, B4, B5, 
Letter, Legal 13, 
Legal 13.5, Legal 14, 
Executive, Tabloid, 
Ta b l o i d  E x t r a64 – 216g/m² Any Tray
Any Stacker
Custom 
W: 100 – 328mm
L: 148 – 457.2mm64 – 216g/m² Any Tray
Fa c e -u p  St a c ker
Custom 
W: 79.2 – 328mm
L: 90 – 457.2mm64 – 268g/m² MP Tray
Fa c e -u p  St a c ker
Banner 
W: A4 width
L: 457.2 –1200mm128g/m² 
recommendedMP Tray
Fa c e -u p  St a c ker
Index card: 
76.2 x 127mm64 – 268g/m² MP Tray
Fa c e -u p  St a c ker
Postcard – – Tray 1 or MP Tray
Fa c e -u p  St a c ker
Downloaded From ManualsPrinter.com Manuals 
						

							C9600 User’s Guide> 30
TRAYS AND STACKERS
TRAYS 1 TO 5
Tray 1 is the standard blank paper input tray and can hold up to 530 
sheets of paper. Additional trays, to give a total of five, can be 
added as an option to give a total tray capacity of 2650 sheets of 
paper.
If you have identical paper stock loaded in another tray (for 
example Tray 2 or the MP Tray), you can have the printer 
automatically switch to that other tray when the current tray runs 
out of paper. This function can be enabled by driver settings when 
printing from a Windows application or by a menu setting when 
printing from other applications.
MP TRAY
The multi-purpose tray is used for media sizes additional to those of 
the standard trays, heavier media weights and special media.
The multi-purpose tray can handle the same sizes as the standard 
trays but in weights up to 268g/m². For very heavy paper stock use 
Envelope 120 x 235mm 
90 x 205mm 
235 x 120mm 
235 x 105mm 
240 x 332mm 
216 x 277mm 
119 x 197mm 
210 x 297mm85g/m² MP Tray
Fa c e -u p  St a c ker
324 x 229mm 
229 x 162mm 
220 x 110mm 
225.4 x 98.4mm 
241.3 x 104.8mm 
190.5 x 98.4mmBased on 
90g/m² paper
Labels A4, Letter, B5 0.1 – 0.2mm MP Tray
Fa c e -u p  St a c ker
Transparencies
Glossy paperA4, Letter 0.1 – 0.11mm Tray 1 or MP Tray
Fa c e -u p  St a c ker
TYPESIZEWEIGHTINPUT/
OUTPUT
Downloaded From ManualsPrinter.com Manuals