OKI C8600cdtn User Manual

Menu functions> 71
TRAY1 
MEDIAWEIGHT
LIGHT (64~74g/
m²)
MEDIUM 
(75~90g/m²)
HEAVY (91~
120g/m²) Adjusts the printer for the weight of 
paper stock loaded in this tray.
TRAY1 LEGAL
SIZELEGAL 14
LEGAL 13.5
LEGAL 13Specifies the legal pa
per size for TRAY1.
TRAY2 PAPERSIZE CASSETTE SIZE 
CUSTOM Selects the size of paper loaded in Tray 2 
(lower) if installed. For CUSTOM setting 
see X-DIMENSION and Y-DIMENSION 
later in this table.
TRAY2 PAPER 
WIDTH 100mm
210mm
297mmSets the width of a custom paper for...

Menu functions> 72
MPT PAPERSIZE A3
A4 SEF
A4 LEF
A5 SEF
A6
B4
B5 SEF
B5 LEF
LEGAL 14
LEGAL 13.5
LEGAL 13
LETTER SEF
LETTER LEF
EXECUTIVE
CUSTOM
COM-10
ENVELOPE
DL ENVELOPE
C5 ENVELOPE
C4 ENVELOPE Selects the size of paper to be fed from 
the multi purpose tray. For CUSTOM 
setting see X-DIMENSION and Y-
DIMENSION later in this table.
MP TRAY PAPER 
WIDTH64mm
210mm
297Sets the width of a custom paper for the 
MP tray. That is, the dimension at 
right 
angles  to the direction of paper feed.
MP TRAY...

Menu functions> 73
COLOUR MENU
The printer automatically adjusts colour balance and density at 
appropriate intervals, optimising the printed output for bright 
white paper viewed in natural daylight conditions. The items on 
this menu provide a means of changing the default settings for 
special or particularly difficult print jobs. Settings revert to their 
default values when the next print job is complete.
ITEMSETTINGSEXPLANATION
ADJUST DENSITY EXECUTE Image density will be automatically 
adjusted...

Menu functions> 74
SYSTEM CONFIGURATION MENU
This menu adjusts general printer settings to suit the way you 
prefer to work.
ITEMSSETTINGSEXPLANATION
POWER SAVE 
DELAY TIME5
15
30
60
240Adjusts the idling time before the printer 
automatically switches into power saving 
mode. In this mode power consumption is 
reduced to a low level required to just 
keep the printer operating and ready to 
receive data. When a job is sent the 
printer will require a warm-up time of up 
to 1 minute before printing can...

Menu functions> 75
USB MENU
This menu controls the operation of the printer’s USB data 
interface.
NETWORK MENU
This menu controls the operation of the printer’s 10Base-T/
100Base-TX network interface.
ITEMSETTINGSEXPLANATION
SOFT RESET ENABLE / 
DISABLEEnables or disables the SOFT RESET 
command.
SERIAL NUMBERENABLE / 
DISABLESpecifies whether to ENABLE or DISABLE 
a USB serial number.
The USB serial number is used to identify 
the USB device connected to your PC.
SPEED 12 / 480 Mps Selects the...

Menu functions> 76
MEMORY MENU
SYSTEM ADJUST MENU
FTPENABLE / 
DISABLEEnables or disables communication via 
FTP.
SNMPENABLE / 
DISABLEEnables or disables SNMP protocol.
NETWORK SCALENORMAL / SMALLSelects network size.
HUB LINK 
SETTINGAUTO 
NEGOTIATE
100BASE-TX FULL
100BASE-TX HALF
10BASE-T FULL
10BASE-T HALFSets full or half duplex for communication 
via a network hub.
ITEMSETTINGSEXPLANATION
ITEMSETTINGSEXPLANATION
RECEIVE BUFFER 
SIZEAUTO
0.5 MB
1 MB
2 MB
4 MB
8 MB
16 MB
32 MBSets the receive buffer...

Menu functions> 77 DUPLEX X
ADJUST0.00 MM
+0.25 MM
+2.00 MM
-2.00 MM
-0.25 MMIn duplex printing, horizontally adjusts 
the print position of the entire image on 
the rear surface at 0.25 mm pitch.
Any image that lies outside the printable 
area is not printed.
DUPLEX Y
ADJUST0.00 MM
+0.25 MM
+2.00 MM
-2.00 MM
-0.25 MMIn duplex printing, vertically adjusts the 
print position of the entire image on the 
rear surface at 0.25 mm pitch.
Any image that lies outside the printable 
area is not printed.
With PS,...

Menu functions> 78
MAINTENANCE MENU
This menu provides access to various printer maintenance 
functions.
ITEMSETTINGSEXPLANATION
MENU RESET EXECUTE Resets menus to default settings.
SAVE MENUEXECUTESaves the current menu settings. The last 
menu executed is saved and the menu 
previously saved is overwritten and 
erased.
When you press the ENTER button, the 
following confirmation message is 
displayed.
“DO YOU WANT TO EXECUTE THIS 
FUNCTION?” YES/NO
If you select NO, the display returns to 
the previous...

Menu functions> 79
USAGE MENU
This menu is for information only, and provides an indication of 
total usage of the printer and the expected life left in its 
consumable items. This is particularly useful if you do not have a 
full set of replacement consumables to hand and you need to 
know how soon you will need them.
BG SETTING–3~0~+3Compensates for print variations caused 
by differences in temperature, humidity 
and printing density/frequency.
Change the value when the background 
density is high....

Replacing consumable items> 80
REPLACING CONSUMABLE ITEMS
This section explains how to replace consumable items when due. 
As a guide, the life expectancy of these items is:
>Toner:
The printer is shipped with sufficient Cyan, Magenta, 
Yellow & Black toner for 6,000 A4 pages in the print 
cartridges.
>Image drum: Approximately 20,000 A4 pages (calculated 
on typical office usage where 20% of printing is 1 page 
only, 30% is 3 page documents and 50% is print runs of 
15 pages or more).
>Transfer belt:...