OKI C710dn User Manual

41 – C710n User’s Guide
PCL 
Setup 
(cont.)White 
Page skipOn/OffSets whether to eject a page 
without any data to print (blank 
page) upon reception of FF 
command (OCH) in PCL Mode. 
OFF: Ejecting.
CR 
FunctionCR/CR+LFSets action when CR code is 
received in PCL.
CR: Carriage Return 
CR+LF: Carriage Return and 
Line Feed
LF 
FunctionLF/LF+CRSets action when LF code is 
received in PCL.
LF: Line Feed 
LF+CR: Line Feed and Carriage 
Return
Print 
MarginNormal
1/5 inch
1/6 inch
Sets a non-printable area...

42 – C710n User’s Guide
PCL 
Setup 
(cont.)
)
Pen Width 
Adjust
On/OffWhen minimum width is 
specified in PCL, sometimes a 
1-dot line, looks broken.
With PEN WIDTH Adjust set to 
ON, when the minimum width is 
specified, the line width will be 
emphasized so as to look wider 
than a 1-dot line.
With PEN WIDTH Adjust set to 
OFF, the line will appear as 
before.
Tr a y  2  I D #1 ~ 5 ~ 59Sets the # to specify Tray 2 for 
the paper feed destination 
command (ESC&l#H) in PCL5e 
emulation.
(Displayed only...

43 – C710n User’s Guide
IBM PPR 
Setup 
(cont.)Symbo 
SetIBM 437Sets the Symbol Set for IBM 
PPR (see machine operator 
panel for complete list).
Letter O 
StyleEnable/
DisableSpecifies the style that replaces 
ø (9B) and ¥ (9D) with ø (ou) 
and Ø (zero).
Zero 
CharacterNormal/
SlashedSpecifies the style of 0(zero). 
SLASHED: SLASH ZERO
Line Pitch6/8 LPISets line space.
White 
Page SkipOn/OffSets whether to eject a blank 
sheet. Available only when 
simplex is set.
CR 
FunctionCR/CR+LFSets action when CR...

44 – C710n User’s Guide
EPSON 
FX SetupCharacter 
Pitch10 CPI/12 
CPI/17 CPI
20 CPI/
Proportional
Specifies character pitch in 
Epson FX emulation.
Character 
SetSET-2
SET-1
Sets a character set.
Symbol 
SetIBM 437Sets the Symbol Set for Epson 
FX Emulation.
(see machine operator panel for 
complete list).
Letter O 
StyleEnable/
DisableSpecifies the style that replaces 
ø (9B) and ¥ (9D) with ø (ou) 
and Ø (zero).
Zero 
CharacterNormal/
SlashedSpecifies the style of 0(zero). 
SLASHED: SLASH ZERO
Line...

45 – C710n User’s Guide
EPSON 
FX Setup 
(cont.)Te x t  
HeightSame/DiffSets height of a character.
SAME: Regardless of CPI, same 
height
DIFF: According to CPI, 
character heights vary.
Color 
SetupInk 
Simulation
Off
SWOP
Euroscale
Japan
The machine has its own 
process simulation engine 
which simulates standard colors 
in the printer.
This function is available only 
with PS language jobs.
UCRLow
Medium
High
Selects limitation to the toner 
layer thickness.
If paper curl occurs in dark 
printing,...

46 – C710n User’s Guide
Memory 
SetupReceive 
Buffer 
Size
Auto
0.5 megabyte
1 megabyte
2 megabyte
4 megabyte
8 megabyte
16 megabyte
Sets the size of receive buffer
Resource 
Save
Auto
Off
0.5 megabyte
1 megabyte
2 megabyte
4 megabyte
8 megabyte
16 megabyte
Sets the size of resource saving 
area.
HDD 
Setup
This item 
is 
displayed 
only if a 
HDD 
(option) 
is 
installed
.
InitializeExecuteInitializes the HDD to the 
factory default setting. Machine 
performs partition-division, and 
initializes each...

47 – C710n User’s Guide
HDD 
Setup 
(cont.)Resize 
PartitionPCL nn%/
Common 
mm%/PSll%/
Specifies the size of partition. 
Specifies a size by ratio to the 
whole HDD in % (1% unit).
nn,mm,ll: 1 - 98 and 
nn+mm+ll=100
The sizes are displayed in the 
partition list and can be 
changed by selecting the 
partition size to be changed. If 
Apply is selected, the following 
confirmation message appears.
Are You Sure? Yes/No
No = return to the previous 
menu.
Yes = Execute Now? Yes/No
No = return to the previous...

48 – C710n User’s Guide
HDD 
Setup 
(cont.)Format 
PartitionPCL
Common
PS
Formats a specified partition.
When the Enter button is 
pressed, the following 
confirmation message appears.
Are You Sure? Yes/No
No =l return to the previous 
menu.
Yes = Execute Now? Yes/No
No i=l return to the previous 
menu. The request to execute 
partition formatting is put into 
the memory and formatting will 
be executed at next power 
cycle.
Yes =shutdown. The partition 
is formatted at power Off/On 
cycle.
In Non-PS...

49 – C710n User’s Guide
Change 
PasswordNew 
Passwordxxxxxxxxxxxx
xxSets a new password to enter 
Admin Setup menu
From 6 to 12 alpha/numeric 
digits can be entered.
Ver ify  
passwordxxxxxxxxxxxx
xxForces the User to input the 
new password to enter Admin 
Setup.
From 6 to 12 alpha/numeric 
digits can be entered.
SettingsReset 
Settings
ExecuteResets EEPROM of CU. Resets 
User menu to the factory 
default.
If Execute is selected, exits 
from the menu.
Save 
Settings
ExecuteSaves menus currently set....

50 – C710n User’s Guide
Calibration
ITEMSETTI
NGSEXPLANATION
Auto DensityOn/OffEnables/disables automatic 
density adjustment.
Adjust 
DensityExecuteIf Execute is selected, the 
printer will immediately adjust 
density and reflect it in TRC 
compensation.
This adjustment must be 
executed when the printer is 
idling. It can become invalid 
if executed in any other 
state.
Adjust 
RegistrationExecuteWhen this menu is selected, the 
printer performs AutoAdjust 
Registration.
This adjustment must be...