OKI C3600n User Manual

Menu functions > 31
SYS ADJUST MENU
Not displayed as default. This menu is displayed only when set to ENABLE in OP MENU 
of Administrator menu.
MAINTENANCE MENU
This menu provides access to various printer maintenance functions.
ITEMSETTINGSEXPLANATION
X ADJUST +2.0mm
~
0
~
-2.0mmAdjusts the position of a whole print image in the direction perpendicular to 
the direction the paper runs, that is horizontally, in 0.25 mm increments.
Any parts of the print image that are outside the printable area as a...

Menu functions > 32
USAGE MENU
This menu is for information only, and provides an indication of total usage of the printer 
and the expected life left in its consumable items. This is particularly useful if you do not 
have a full set of replacement consumables to hand and you need to know how soon you 
will need them.
PRINT STATISTICS MENU
PAPER COLOR 
SET–2~0~+2 As above, but for colour printing.
SMR SETTING –2~0~+2 Sets a correction value for uneven print quality, to correct print variations 
caused...

Menu functions > 33
ADMINISTRATOR MENU
This menu is only accessible to System Administrators. In order to gain access to this 
menu, hold down the ENTER button whilst turning the printer ON.
This menu is in ENGLISH only.
ITEMSETTINGSEXPLANATION
ENTER PASSWORD xxxxxxxxxxxx Enter a password to gain entry to the Admin 
menu.
Password should be from 6 to 12 digits of 
alpha/numeric characters (or mix) 
The default value is aaaaaa
OP MENU/ ALL CATEGORYENABLE
DISABLESet up ENABLE/DISABLE condition for all...

Menu functions > 34 OP MENU (cont.) FX EMULATIONENABLE
DISABLESet up ENABLE/DISABLE condition for FX 
EMULATION category.
If DISABLE is selected, FX EMULATION 
category of USERS MENU will not appear.
USB MENUENABLE
DISABLESet up ENABLE/DISABLE condition for USB 
MENU category.
If DISABLE is selected, USB MENU category of 
USERS MENU will not appear.
NETWORK 
MENUENABLE
DISABLESet up ENABLE/DISABLE condition for 
NETWORK MENU category.
If DISABLE is selected, NETWORK MENU 
category of USERS MENU will not...

Menu functions > 35 PS MENU LI TRAYTYPE1
TYPE2Switches between Postscript types
SIDM MENU SIDM MANUAL 
ID#0 ~ 2 ~ 9 Set up Pn specified in MANUAL by MANUAL-1 
ID No.FX/PPR Emu in CSFcontrol command 
(ESC EM Pn). 
SIDM MANUAL2 
ID0 ~ 3 ~ 9 Set up Pn specified MANUAL by MANUAL-2 ID 
No.FX/PPR Emu in CSF control command (ESC 
EM Pn).
SIDM TRAY 0 ~ 1 ~ 9 Set up Pn specified TRAY (MP Tray) by MP Tray 
ID No.FX/PPR Emu in CSF control command 
(ESC EM Pn). 
CHANGE 
PASSWORDNEW 
PASSWORD
xxxxxxxxxxxxSet a new...

Replacing consumable items > 36
REPLACING CONSUMABLE ITEMS
This section explains how to replace consumable items when due. As a guide, the life 
expectancy of these items is:
TONER:
STARTER CARTRIDGES:
The machine is shipped with sufficient Black, Cyan, Magenta & Yellow toner for 1,000 
A4 pages, of which 500 A4 pages of toner are used to initially charge the image drum 
(500 A4 pages remaining at 5% coverage).
REPLACEMENT CARTRIDGES:
Replacement cartridges are available in Standard capacity (1,500 A4...

Replacing consumable items > 37
CONSUMABLE ORDER DETAILS
* Average life: 20% pages at continuous print, 50% pages at 3 pages per job and 30% pages at 1 page 
per job.
For the protection of your product, and in order to ensure that you benefit from 
its full functionality, this model has been designed to operate only with genuine 
original toner cartridges. Any other toner cartridge may not operate at all, even 
if it is described as “compatible”, and if it does work, your products performance 
and print...

Replacing consumable items > 38
If you do spill any toner powder, lightly brush it off. If this is not enough, use a cool, damp 
cloth to remove any residue.
Do not use hot water, and never use solvents of any kind. They will make stains 
permanent.
1.Press the cover release and open the printer’s top cover fully.
2.Note the positions of the four cartridges.
(a) Pull the coloured toner release lever (1) on the cartridge to be replaced fully 
towards the front of the printer.
3.Lift the right-hand end of...

Replacing consumable items > 39
5.Remove the new cartridge from its box but leave its wrapping material in place for 
the moment.
(a) Gently shake the new cartridge from end to end several times to loosen and 
distribute the toner evenly inside the cartridge.
(b) Remove the wrapping material and peel off the adhesive tape from the 
underside of the cartridge.
6.Clean the top surface of the image drum
7.Insert the left end of the cartridge into the top of the image drum unit
(a) first, pushing it against...

Replacing consumable items > 40
8.Press gently down on the cartridge to ensure that it is firmly seated, push the 
coloured lever (1) towards the rear of the printer. This will lock the cartridge into 
place and release toner into the image drum unit.
9.Finally, close the top cover and press down firmly at both sides so that the cover 
latches.
1
Downloaded From ManualsPrinter.com Manuals