OKI C3600n User Manual

Menu functions > 21
MENUS
INFORMATION MENU
This menu provides a quick method of listing various items stored within the printer.
SHUTDOWN MENU
This menu only appears if ENABLE is selected in ADMIN menu.
PRINT MENU
This menu provides adjustment of various print job related functions.
ITEMACTIONEXPLANATION
PRINT MENU MAP EXECUTE Prints complete menu listing with current settings shown.
NETWORK EXECUTE Prints Network configuration information.
PRINT FILE LIST EXECUTE Prints a list of overlays, macros, fonts...

Menu functions > 22
MEDIA MENU
This menu provides adjustment to suit a wide range of print media.
MONO-PRINT 
SPEEDAUTO SPEED
NORMAL SPEED 
COLOR SPEED If the first page of a print job is black and white, the printer runs 
at 20ppm (pages per minute). When a colour page is detected the 
printer slows down to 16ppm.
This setting operates in the same way as AUTO SPEED, except 
that the printer runs at 20ppm until a colour page is detected, 
when it switches to 16PPM. This setting is therefore most...

Menu functions > 23 MF PAPERSIZE LETTER
EXECUTIVE
LEGAL14
LEGAL13.5
LEGAL13
A4 / A5 / A6 / 
B5
CUSTOM
COM-9 
ENVELOPE
COM-10 
ENVELOPE
MONARCH ENV
DL ENVELOPE
C5 ENVELOPESelects the size of paper to be fed from the multi purpose tray. For 
CUSTOM setting see X-DIMENSION and Y-DIMENSION later in this 
table.
MF MEDIATYPEPLAIN
LETTERHEAD
LABELS
BOND
RECYCLED
CARD STOCK
ROUGH
GLOSSY
USER TYPE 1
USER TYPE 2
USER TYPE 3
USER TYPE 4
USER TYPE 5Selects the type of media to be fed from the multi purpose tray so...

Menu functions > 24
COLOUR MENU
The printer automatically adjusts colour balance and density at appropriate intervals, 
optimising the printed output for bright white paper viewed in natural daylight conditions. 
The items on this menu provide a means of changing the default settings for special or 
particularly difficult print jobs.
ITEMSETTINGSEXPLANATION
DENSITY 
CONTROLAUTO
MANUALIf set to AUTO, image density will be automatically adjusted at power on, 
when a new image drum or toner cartridge is...

Menu functions > 25
SYSTEM CONFIGURATION MENU
This menu adjusts general printer settings to suit the way you prefer to work.
CMY 100% 
DENSITYDISABLE
ENABLEWhen enabled, black areas are produced using 100% C, M, and Y instead 
of black. This results in a glossier finish.
CMYK 
CONVERSIONON
OFFSetting to OFF will simplify the conversion process of CMYK data, which 
will reduce the processing time.
This setting is ignored when Ink Simulation function is used.
Note: This function only applies to PS models...

Menu functions > 26
PCL EMULATION
This menu controls settings effective when the printer is operating in PCL emulation mode.
ITEMSSETTINGSEXPLANATION
FONT SOURCERESIDENT / 
RESIDENT2
DOWNLOADE
DSpecifies the location of the PCL default font. Normally this will be 
INTERNAL unless additional fonts are installed in the expansion ROM slot or 
additional fonts have been downloaded to RAM as permanent fonts.
FONT No.I0/ C001 / 
S001Sets the current default font number from the currently selected source,...

Menu functions > 27
PPR EMULATION
This menu controls settings effective when the printer is operating in PPR emulation mode.
ITEMSETTINGSEXPLANATION
CHARACTER 
PITCH10 CPI; 
12 CPI; 17 
CPI; 
20 CPI; 
PROPORTION
ALSpecifies character pitch in IBM PPR emulation.
FONT 
CONDENSE12CPI - 
20CPI; 
12CPI - 12CPISpecifies 12CPI pitch for Condense Mode.
CHARACTER 
SETSet 1; Set 2Specifies a character set.
SYMBOL SET IBM 437
(Default Symbol 
Set only shown)Specifies a symbol set.
LETTER 0 
STYLEDisable;...

Menu functions > 28
FX EMULATION
This menu controls settings effective when the printer is operating in FX emulation mode.
ITEMSETTINGSEXPLANATION
CHARACTER 
PITCH10 CPI; 
12 CPI; 17 
CPI; 20 CPI; 
PROPORTION
ALSpecifies character pitch in this emulation.
CHARACTER 
SETSet 1; Set 2Specifies a character set.
SYMBOL SETIBM 437 
(Default 
Symbol Set 
only shown)Specifies a symbol set.
LETTER 0 
STYLEDisable; 
EnableSpecifies the style that replaces 9BH with letter o and 9DH with a zero
ZERO...

Menu functions > 29
USB MENU
This menu controls the operation of the printer’s USB data interface. 
NETWORK MENU
This menu controls the operation of the printer’s 10Base-T/100Base-TX network interface.
ITEMSETTINGSEXPLANATION
SOFT RESET ENABLE / DISABLEEnables or disables the SOFT RESET command.
SPEED 12 / 480 Mps Selects the interface speed.
OFFLINE RECEIVE ENABLE / DISABLEOFFLINE RECEIVE.
SERIAL NUMBERENABLE / DISABLE Specifies whether to ENABLE or DISABLE a USB serial 
number.
The USB serial number is...

Menu functions > 30
MEMORY MENU
This menu sets the conditions of memory allocated to the buffer and resource.
Not displayed as default. This menu is displayed only when set to ENABLE in OP MENU 
of Administrator menu.
NETWORK 
SCALENORMAL / 
SMALLSelects network size.
When NORMAL is selected, printer can work effectively, even when 
connected to a HUB that has a spanning tree
feature. However, printer start up time gets longer when computers are 
connected with two or three small LANs.
When SMALL is...