OKI C3300N User Manual

Using the printer software> 91
PRINT MENU
This menu provides adjustment of various print job related 
functions.
MEDIA MENU
This menu provides adjustment to suit a wide range of print 
media.
PRINT MENU
ITEMSETTINGSEXPLANATION
COPIES 1-999 Enter the number of copies of a 
document to be printed from 1 to 999.
MANUAL FEED 
(Multi Purpose 
Tr a y )ON/OFFSelects the default tray for paper feed, 
Cassette Tray or Multi Purpose Tray.
MEDIA SIZE 
CHECK ENABLE
DISABLEDetermines whether 
the printer checks 
the...

Using the printer software> 92
TRAY 
- MEDIA TYPEPLAIN
LETTERHEAD
BOND
RECYCLED
ROUGH
USERTYPE1 – 5Selects the type of media loaded 
in this tray. This will help the 
printer to adjust its internal 
operating parameters, such as 
engine speed and fusing 
temperature, to better 
accommodate the media to be 
fed. For example, letterhead may 
benefit from a slightly lower 
fusing temperature to ensure that 
its ink does not offset. Usertype 1 
– 5 will be displayed only when 
registered from the host PC....

Using the printer software> 93
MANUAL (Multi 
Purpose Tray)
- MEDIA 
WEIGHTMEDIUM (75-
90g/m²)
HEAVY (91-
120g/m²)
ULTRA HEAVY 
(121-203g/m²)Selects the media weight to be 
fed from the Multi Purpose Tray.
CUSTOM PAPER 
SIZE
- MEDIA SIZE 
UNIT MILLIMETRE
INCH
Selects the unit of measure for 
the next two items.
CUSTOM PAPER 
SIZE
- MEDIA WIDTH64-
210 -216 
MILLIMETRESelects the width  of paper defined 
by the “CUSTOM” settings 
referred to in the foregoing PAPER 
SIZE settings.
CUSTOM PAPER 
SIZE
-...

Using the printer software> 94
COLOUR MENU
The printer automatically adjusts colour balance and density at 
appropriate intervals, optimising the printed output for bright 
white paper viewed in natural daylight conditions. The items on 
this menu provide a means of changing the default settings for 
special or particularly difficult print jobs. Settings revert to their 
default values when the next print job is complete.
COLOUR MENU
ITEMSETTINGSEXPLANATION
DENSITY 
ADJUSTMENT 
MODE AUTO
MANUAL
If set...

Using the printer software> 95
SYSTEM CONFIGURATION MENU
This menu adjusts general printer settings to suit the way you 
prefer to work.
SYSTEM CONFIGURATION MENU
ITEMSSETTINGSEXPLANATION
STATUS PAGE 
AUTO PRINT ENABLED
DISABLEDAutomatically prints status on power 
up.
TIME TO POWER 
SAVE MODE5 MIN
15 MIN
30 MIN
60 MIN
240 MINAdjusts the idling time before the 
printer automatically switches into 
power saving mode. In this mode 
power consumption is reduced to a 
low level required to just keep the...

Using the printer software> 96
USB MENU
This menu controls the operation of the printer’s USB data 
interface.
JAM RECOVERYON
OFFSpecifies whether the printer should 
perform jam recovery after a paper 
jam has occurred. If ON, the printer 
will attempt to print again any pages 
lost due to a paper jam once the jam 
has been cleared.
ERROR REPORTON
OFFSpecifies whether to print an error 
report when an inte
rnal error occurs.
LANGUAGE English, 
German, 
French, Italian, 
Spanish, 
Swedish, 
Norwegian,...

Using the printer software> 97
SYSTEM ADJUSTMENT MENU
This menu provides fine adjustment of image position on the 
printed page in steps of 0.25mm.
SYS ADJUST MENU
ITEMSETTINGSEXPLANATION
X ADJUST -2.00 ~  0 ~ 
+2.00 Horizontal position.
Y ADJUST-2.00 ~ 
0 ~ 
+2.00Vertical position.
DUPLEX X 
ADJUST -2.00 ~ 
0 ~ 
+2.00 Horizontal position.
DUPLEX Y 
ADJUST-2.00 ~ 
0 ~ 
+2.00Vertical position.
DRUM 
CLEANING ON
OFFON rotates the drum (without 
printing) prior to printing to reduce 
any horizontal white...

Using the printer software> 98
MAINTENANCE MENU
This menu provides access to various printer maintenance 
functions.
MAINTENANCE MENU
ITEMSETTINGSEXPLANATION
MENU RESET EXECUTE Resets menus to default settings.
POWER SAVE 
MODEON/OFFEnables or disables automatic power 
save mode. Delay before entering 
this mode is set in the system 
configuration menu.
PAPER BLACK 
SET –2~
0~+2 Used for small ad justment when you 
experience faded print or light 
specks / streaking in monochrome 
printing on white...

Using the printer software> 99
USAGE MENU
This menu is for information only, and provides an indication of 
total usage of the printer and the expected life left in its 
consumable items. This is particularly useful if you do not have a 
full set of replacement consumables to hand and you need to 
know how soon you will need them.
USAGE MENU
ITEMEXPLANATION
SHEETS 
- TOTAL 
- TRAY
- MANUAL TRAY 
(MPT) 
- COLOUR PAGE 
- MONO
The total number of prints output by the printer.
The total number of pages fed...

Using the printer software> 100
PRINTING SETTINGS
To print a list of the printer settings:
1.Start the Status Monitor.
2. Select the Printer Setup tab.
3. Click on the  Printer Settings  button on the Printer Setup 
tab.
4. Click on the Information menu and then select Print Menu 
Map.
5. Click on the  Printer Menu  button to print a Menu Map of 
printer settings.
CHANGING THE DISPLAY LANGUAGE
If required, carry out the followi ng instructions to change the 
language that is displayed in the Status...