OKI B440dn User Manual

Printer components > 11
17.Power cable connection
18. Duplex unit  
19. Parallel interface connection
20. USB interface connection
21. LAN interface connection (only for B410dn, B430dn and B440dn)
22. Test button (only for B 410dn, B430dn and B440dn)
23. Memory panel (to upgrade your printer’s memory RAM DIMM)
24. Cooling fan
17
18
23
24
19
20 21
22
Downloaded From ManualsPrinter.com Manuals 

Operator panels > 12
OPERATOR PANELS
This chapter describes the function of the operator panel on your printer. It is useful to 
describe the Printer Menu Setup Tool at this  point as it provides the B410d, B410dn, the 
equivalent of the menu control panel  on the B430d, B430dn and B440dn (See  “Printer 
drivers” on page 38  for installation of the  Printer Menu Setup Tool.)
B410D, B410DN
OPERATOR PANEL
The B410d, B410dn operator panel consists of 2 indicating LEDs, an LCD (3)  and an  Online 
(4)...

Operator panels > 13
LCD 
The LCD (3) has two rows of up to 16 alphanumeric digits, displaying print status and error 
messages.
ONLINE BUTTON
The primary functions of the  Online button (4)  are activated by pressing the switch 
momentarily and releasing. The pr imary functions are as follows:
> Turning the printer off-line.
> Turning the printer on-line (ready).
> Resuming printing after page overflow.
> Interrupting data processing when the pr inter is receiving and processing data.
> Resuming data...

Operator panels > 14
>Resetting the printer and clearing the bu ffer after printing has been cancelled.
CHANGING LANGUAGE
The default language used by your printer for  display messages and for report printing is 
English. If required, th is can be changed to:
PRINTER MENU SETUP TOOL
After installing the printe r driver software onto your comp uter, the Printer Menu Setup Tool 
is then automatically installed.  See “Printer drivers” on page 38.  This Printer Menu Setup 
Tool  is used to control and...

Operator panels > 15
MENU FUNCTIONS
The Printer Menu allows you to view and change the printer’s internal settings. You can 
think of this as the software equi valent of the LCD operator panel.
The settings are grouped into categories or  “menus” such as Information Menu or Print 
Menu.
Some of these settings are similar to those fo und in your printer driver or application 
software. The settings that you can change using  this software act as the printer’s defaults. 
These can be overridden by  the...

Operator panels > 16
Print menu
This menu provides adjustment of various print job related functions.
Media menu
This menu provides adjustment to  suit a wide range of print media.
ITEMDEFAULTREMARKS
COPIES 1
DUPLEX OFF
MANUAL OFF
PAPER FEED TRAY1
AUTO TRAY SWITCH ON
TRAY SEQUENCE DOWN
MEDIA CHECK ENABLE
RESOLUTION 600DPI
TONER SAVE MODE DISABLE
ORIENTATION PORTRAIT
LINES PER PAGE 64 LINES
EDIT SIZE CASSETTE SIZE
ITEMDEFAULTREMARKS
TRAY1 PAPERSIZE A4
TRAY1 MEDIATYPE PLAIN
TRAY1 MEDIAWEIGHT MEDIUM
TRAY2...

Operator panels > 17
System configuration menu
This menu adjusts general printer settings to suit the way you prefer to work.
PCL Emulation
This menu controls the printer’s PCL emulation.
ITEMDEFAULTREMARKS
POW SAVE TIME 10 MIN
PERSONALITY AUTO EMULATION
CLRABLE WARNING ONLINE
AUTO CONTINUE ON
MANUAL TIMEOUT 60 SEC
TIMEOUT INJOB 40 SEC
TIMEOUT LOCAL 40 SEC
TIMEOUT NET 90 SEC B410dn only
LOW TONER CONTINUE
JAM RECOVERY ON
ERROR REPORT OFF
ITEMDEFAULTREMARKS
FONT SOURCE RESIDENT
FONT NO. I0
FONT PITCH...

Operator panels > 18
PPR Emulation
This menu controls the printer’s PPR emulation.
FX Emulation
This menu controls the printer’s FX emulation.
ITEMDEFAULTREMARKS
CHARACTER PITCH 10 CPI
FONT CONDENSE 12CPI TO 20CPI
CHARACTER SET SET-2
SYMBOL SET IBM-437
LETTER O STYLE DISABLE
ZERO CHARACTER NORMAL
LINE PITCH 6 LPI
WHITE PAGE SKIP OFF
CR FUNCTION CR
LF FUNCTION LF
LINE LENGTH 80 COLUMN
FORM LENGTH 11.7 INCH
TOF POSITION 0.0 INCH
LEFT MARGIN 0.0 INCH
FIT TO LETTER DISABLE
TEXT HEIGHT SAME...

Operator panels > 19
Parallel menu
This menu controls the operation of the printer’s parallel data interface.
USB menu
This menu controls the operation of the printer’s USB data interface.
Network menu
This menu controls the operation of the pr inter’s 10Base-T/100Base-TX network interface.
ITEMDEFAULTREMARKS
PARALLEL ENABLE
BI-DIRECTION ENABLE
ECP ENABLE
ACK WIDTH NARROW
ACK/BUSY TIMING ACK IN BUSY
I-PRIME 3 MICRO SEC
ITEMDEFAULTREMARKS
USB ENABLE
SOFT RESET ENABLE
SPEED 480 Mbps
SERIAL NUMBER ENABLE...

Operator panels > 20
Print Statistics menu
This menu provides information on the number of A4/Letter pages printed and allows you 
to reset the counter. 
Maintenance menu
This menu provides access to va rious printer maintenance functions.
Usage menu
This menu is for information only, and provides  an indication of total usage of the printer 
and the expected life left in its consumable item s. This is particularly useful if you do not 
have a full set of replacement consumables to hand and you need to...