OKI B410d User Manual

Operation > 41
Image tab
1.Dithering produces an intermediate greysc ale by adjusting the combination of dots 
used in printing. Selecting a setting determ ines the degree of detail with which a 
graphics image will be printed. Mesh determ ines that a screen of dots is used for 
dithering while Line Art determines that an array of lines is used for dithering.
2. Select dithering texture by setting the si ze of dots used in the halftone screen.
3. Set this control to print greyscale effect s in black...

Operation > 42
PS EMULATION (B430DN)
The tabs available are the Layout Tab, the Paper/Quality Tab  and the  Job Options Tab .
Layout tab
1.Page orientation can be set to portrait (t all), landscape (wide) or landscape rotated 
by 180 degrees.
2. Print on both sides (duplex printing) can be  set to long edge or short edge of the 
document.
3. Printed page order can be set as front to  back or back to front of the document.
4. Set the number of pages to be printed on a  single sheet. You can also set it...

Operation > 43
Paper/Quality tab
You can set the paper source or leave it as automatic selection and by using the  Advanced 
button you have access to the same set of  options as described above for the Layout Tab.
Job options tab
1.The output resolution  of the printed page can be set as follows.
> The ProQ1200 for B410d and B410dn setting prints at 2400 x 600dpi. This setting 
requires the most printer memory and take s the longest to print. It is the best 
option for printing photographs. 
> The High...

Operation > 44
2.You can print watermark text behind the main  page image. This is useful for marking 
documents as draft, confidential, etc.
If you would like to print on special statio nery, such as forms and letterhead, but do 
not want to use pre-printed stationery, you  can create your own using Overlays (for 
B430dn). For more information on  Overlays and Macros, refer to “Overlays and 
Macros (Windows only)” on page 55 . The Overlays button also offers guidelines on 
how to carry out manual...

Operation > 45
Advanced tab
1.You can specify which times of day your printer will be available.
2. Indicates current priority, from 1 (lowest) to 99 (highest). Highest priority 
documents will print first.
3. Specifies that documents should be spoole d (stored in a special print file) before 
being printed. The document  is then printed in the background, allowing your 
application program to become available more quickly. Options follow:
This specifies that printing should not star t until the last...

Operation > 46
compatibility problems occur you can disable the feature. However, these advanced 
options may then not be available, even though the hardware might support them.
9. This button provides access to the same  setup windows as when printing from 
applications. Changes made via the Wind ows Control Panel become the Windows 
default settings.
10. You can design and specify a separator page  that prints between documents. This is 
particularly useful on a shared printer to  help each user find...

Operation > 47
Device settings tab
1.You can set the desired paper sizes in each of the available paper feed trays.
2. You can make a variety of font settings depending on your application.
3. You can set which optional upgrades are in stalled on your printer. See the chapter 
entitled “Installing options”.
PRINTER SETTINGS IN MACINTOSH
Refer to the readme file on the driver CD  and the online help provided in the driver 
software.
1
2
3
Downloaded From ManualsPrinter.com Manuals 

Operation > 48
POWER SAVING MODE
Power Saving sets how long the printer waits before going into standby mode. In standby 
mode your printer’s energy consumption is re duced. You can specify the length of time 
before a printer enters power saving  mode by setting a larger value.
CHANGING THE LENGTH OF TIME BEFORE ENTERING POWER SAVING MODE
B410d and B410dn
Use the Menu Setup Tool
1.Select Start > Programs > Oki Data > OKI B410 printer Menu Setup Tool > Printer 
Menu Setup Tool.
2. Double-click  System...

Operation > 49
B420dn and B430dn
Use the Printer Menu via the Operator Panel
1.Press the  Menu    or     button until  Maintenance Menu appears. Press  .
2. Press    or    until  Power Save appears. Press  .
3. Press    or     until  Disable appears. Press   . An asterisk (*) will appear to 
confirm the selection.
4. Press  Online .
Downloaded From ManualsPrinter.com Manuals 

2-sided printing > 50
2-SIDED PRINTING 
The duplex unit adds the function of two-sided printing, using less paper and making large 
documents easier to handle. It also enables  booklet printing, which uses even less paper.
This printer has the option of Auto  Duplex and Manual Duplex printing.
AUTO DUPLEX PRINTING
This option provides automatic two-sided prin ting only for Letter, A4, Legal 13 and 14 and 
Custom paper sizes, using paper stocks from 60 - 105g/m2 (16 - 28 lb). 
To carry out Auto Duplex...