Nvidia 3d Vision 2 User Guide

16nV IDI a 3D V I sIon U seR GUID e
03
120 Hz l CD Connection Diagram for US b IR Emitter
IR EmitterPC
LCD 
DVI
DO NOT MAKE THIS CONNECTION UNTIL TOLD TO DO SO BY THE INSTALL WIZARD
USB Cable
Dual Link DVI cable (supplied with the display)
USB    DVI                                                  

 17
120 Hz lCD Connection Diagram for l CD monitors with b uilt in IR Emitters
Note: lCD m onitors with b uilt in IR emitters do not require additional U sb connectors from the PC to the monitor.
PC
LCD 
DVI
Dual Link DVI cable (supplied with the display)
    DVI     

18nV IDI a 3D V I sIon U seR GUID e
03
USB
Wired Glasses Connection Diagram
Removing Current Display Drivers
before you begin the installation, you must remove 
the graphics driver currently on your computer. 
STOP: If you purchased a PC with a built-in 3D Vision IR e mitter (e.g. notebook) then 3D Vision drivers should already be installed on your PC. Do not uninstall the drivers. s kip steps 2-7 and proceed to step 8.          

 19
2. Go to Start › Control Panel › Programs and Features. 
If you have an nVIDIa graphics card, double click NVIDIA 
Drivers.*
a) select the option Remove only the following. 
b) select NVIDIA Display Driver 
c) Click Remove 
d) Restar t your computer
  * If you are replacing a non n VIDIa graphics card, be sure to remove the 
graphics driver and power down your system to replace the card before 
continuing. Replace the card with a suppor ted n VIDIa Ge force card.
Installing the Drivers and Software...

20nV IDI a 3D V I sIon U seR GUID e
03
Congratulations!  
setup and configuration are complete and 3D Vision is enabled and 
ready for you to begin the most immersive gaming experience for  
the PC.
Note: 3D Vision has been enabled with the default depth amount of 15%. n VIDIa recommends all new users begin with the default depth amount until you are comfor table. You can increase the depth over time as your eyes grow accustomed to stereoscopic 3D viewing. The depth amount can be changed from the n VIDIa...

 21
NVIDIa CONTROl pa NEl 
04
nVIDIa has provided tools for you to customise your 
3D Vision experience. To access the tool menus, go to 
the nVIDIa Control Panel.
Accessing the NVIDIA Control Panel
To open the NVIDIA Control Panel, right click on the desktop and 
select the nVIDIa Control Panel. You can also go to Windows 
Control PanelHardware and SoundNVIDIA Control Panel.
select Stereoscopic 3D from the topics in the left window pane. 
You may need to click on the + in front of Stereoscopic 3D to...

22nV IDI a 3D V I sIon U seR GUID e
Set Up Stereoscopic 3D
This section of the n VIDIa Control Panel provides all the 
adjustments needed to enhance your gaming experience. 
each of the adjustments on this screen is discussed.
Enable Stereoscopic 3D
Note: stereoscopic 3D effects work only with full-screen  DirectX applications.
To enable stereoscopic 3D mode, check the box.  
When this box is checked, it enables you to turn stereoscopic 
3D effects on and off using the U sb IR emitter on button,...

 23
Adjusting the Depth
The depth amount in a game is the depth that the far thest object is 
placed in a scene. When 3D Vision is first installed on your system, 
the Depth is set at the default of 15%. If you are new to 3D gaming, 
15% is a good point to star t with. Viewing depth at a higher setting 
can be uncomfor table to some users. as you use 3D Vision, your eyes 
will become more accustomed to viewing stereoscopic 3D and you 
can incrementally increase the depth amount without eye strain.
on the...

24nV IDI a 3D V I sIon U seR GUID e
reflected on the Depth slider in the n VIDIa Control Panel.
Stereoscopic 3D Display Type
The Stereoscopic 3D display type is a drop-down list of all 3D Vision 
Ready displays that were found by the s etup Wizard. This list is 
populated by the Wizard. If you had more than one 3D Vision-Ready 
display attached during setup, they will be reflected in the list.
Change 3D Laser Sight
The cross-hair sight in a first-person shooter ( fP s) game is usually  
positioned at...

 25
Different laser sights are displayed as you scroll down. 
To use your selected laser sight, check the Enable laser 
sight for configured game check box. If you would rather 
use the game’s laser sight, uncheck the box. 
You can define the amount of transparency for the selected 
laser sight by using the Transparency slider. a setting of 0% 
is a solid laser sight and a setting of 100% is see-through. a 
recommended laser sight transparency is 25%. You can also 
use the keyboard shor tcut keys, C tr...