Nvidia 3d Vision 2 User Guide

6nV IDI a 3D V I sIon U seR GUID e
Do not block this side of your glasses. It must be in-line-of-sight with the IR emitter
ON button 
Indicator Light: To check the batter y life, press the ON button.  If the indicator light is:  Green: Up to 60 hours of batter y life.  Red: flashing red indicates two hours or less batter y life 
Amber LED: light flashes amber  when charging. s olid amber when  fully charged.
Usb connection to charge glasses
 
 
If you are charging the wireless glasses by connecting them...

UnPa CKIn G e qUIP men T7
Changing the nose Piece
Your wireless glasses come with three interchangeable nose pieces 
to give you a comfor table fit. s imply pull out the current nose piece 
and inser t the one that fits you best.
Pull the nose piece out as shown and snap another nose piece in place
USB IR Emitter  
(included with the 3D Vision glasses kit)
3D Vision products such as desktop monitors, projectors, and some 
3D Vision notebooks use the U sb IR emitter to communicate to the 3D 
Vision...

8nV IDI a 3D V I sIon U seR GUID e
02
WARNING: Infrared Device Safety  
Cl a SS 1 l ED pRODUCT This product includes an Infrared light-emitting diodes for transmitting signals from the controller to the glasses. although this invisible beam is not considered harmful, and complies with EN60825-1 (IEC60825-1), we recommend the following precaution: when the Infrared device is transmitting:
 >Do not stare into the emitter
 >Do not view directly with optical instruments
No par ts in the device may be ser...

InsTa ll a TIon a n D seT UP9
R T
Y
H
G
F
D
C V
X 7
6
5
F6F5F4
3D      (Triangle Down) Decrease stereoscopic 3D depth
3D      (Power Button) 3D Vision on /off button
3D      (Triangle Up) Increase stereoscopic 3D depth
Built-in 3D Vision IR Emitter The minimum viewing distance  from the emitter is 9 inches (23 cm).  location of emitter may var y  depending on notebook.
Built-in IR Emitters
3D Vision products with b uilt-In IR emitters do not require the U sb 
IR emitter and will communicate directly with...

10nV IDI a 3D V I sIon U seR GUID e
02
3D Vision l CD monitors and a ll-In-one PCs 
m ost 3D Vision l CD monitors and a ll-in-one PCs will not have keys 
for controlling 3D Vision when playing 3D content.  You can control 3D 
using the following keyboard shor tcuts:
> 3D on /off – CTR l-T
> Increase stereoscopic 3D depth – CTR l-f 4
> Decrease stereoscopic 3D depth – CTR l-f 3
Note: The effective range of the Desktop l CD built-in IR e mitter is 15 feet.  The effective range of the a ll-In-one PC b...

InsTa ll a TIon a n D seT UP11
Wired Glasses 
3D Vision Wired Glasses are designed to work with 3D Vision-Ready 
displays. The Wired Glasses do not use the U sb IR emitter that 
comes with 3D Vision Wireless Glasses kits and 3D Vision n otebooks. 
USB Cable 
This cable is permanently attached to the Wired Glasses and is not a removable cable.  You can use Usb extender cables to increase the length of this cable.
USB Plug
ensure the 3D Vision Controller Driver is installed before plugging in the Wired...

12nV IDI a 3D V I sIon U seR GUID e
02
Changing the nose Pieces 
Your wireless glasses come with three interchangeable nose pieces 
to give you a comfor table fit. s imply pull out the current nose piece 
and inser t the one that fits you best.
securing Wired Glasses
3D Vision Wired Glasses can also be secured to be a PC using the 
notch in the U sb plug and notebook security devices.   n VIDIa has 
tested Kensington notebook security devices to attach the glasses to 
a PC tower or table. 
Pull the nose...

 13
03
INSTalla TION a ND SETU p
Installing the hardware and software to your computer 
system is pretty straightfor ward. 
Note: before beginning the installation, make sure your  wireless glasses are fully charged. s ee Charging the Glasses on page 6. 
Download the Latest Software
Required action before You s tart the Installation 
 
If your notebook with built-in 3D Vision IR e mitter includes nVIDIa 3D 
Vision glasses, drivers are already installed on your notebook 120Hz. 
Please launch the " set...

14nV IDI a 3D V I sIon U seR GUID e
03
Installation
Connecting the Display  
(skip this step if you are using a 3D Vision notebook)
1. Connect your 3D Vision Ready display to your n VIDIa graphics 
card. The display you connect must be a 3D Vision Ready l CD or 
analogue CRT display. for lCDs use the dual-link DVI-to-DVI 
cable supplied with the display.
Note: Connect onl Y the display now. The driver and software must be installed prior to connecting the U sb IR emitter.
see the following pages for...

 15
Dlp HDTV Connection Diagram
Note: Check your D lP’s user manual to see if there is a specific HD mI por t used to connect a PC to your HDT V. In addition, change the input mode on the T V’s menu to be PC or Computer to ensure the T V can process the video signal correctly. 
Note: The DVI-to-HD mI Cable is not included with your 3D Vision kit. Please obtain one from a computer or electronics store.
IR EmitterPC
DLP
HDMI Port
VESA 3-pin  stereo cable 
3D Glasses  Emitter Port
DVI-to-HDMI Cable
DO NOT...