Nortel Modular Ics Telephone Feature Card Manual

•

Modular ICS
Telephone Feature Card 

Use this card as a quick reference for accessing the features of your 
telephone. Your system administrator will inform you if any of these features 
are not available for your telephone.
This card uses the Business Series Terminals button icons. The table below 
shows which buttons to use on the different types of  Nortel Networks 
telephones. 
²¡ßCancel ²£¡ß
Listen to music (provided by your office) through your telephone speaker 
when you are not on a call.
²¥â
Check what is programmed on any button....

 
²àÞ
Answer a call that is ringing at another telephone in your pickup group. The 
external call that has been ringing longest is answered first.
²¡âÚ
Answer the next call. If more than one call is waiting, priority is given to 
incoming external calls over callback, camped, or transferred calls.
²¡Û
Re-route a call to another telephone even if all its lines are busy.
Press 
²¡Û, then dial the extension number of the receiving telep hone.
²ß¡
Change the dialing filters on a line or telephone, or  gain...

²¥à
Adjust the contrast of your display.
Press 
²¥à, then press a number from Ú toá(depending on your 
telephone). Press
³to set your choice.
²¥¡Û
Choose one of three methods of dial ing.
1. Press 
²¥¡Û.
2. Press £ to select the mode.
3. Press³to store the mode.
Standard Dial: Select a line, then dial the number. (Standard Dial is always 
available, even when another dialing mode is selected.)
Automatic Dial: Dial the number without choosing a line button first. Your prime 
line is automatically selected...

 
²¡ÝCancel ²£¡Ý
Send calls arriving on an external line to another telephone outside your 
system. (Some external lines may not support this feature. See your system 
coordinator.) This feature is not available on the T7100/M7100 tel ephone.
²àÚ
Generate a Link signal ‹ to access a PBX or other host exchange.
²¡â¡
Generate a tone for as long  as  you hold down a button. This  is used  to 
communicate with devices like fax or answering machines. Long tones are in 
effect only for your current call....

External page
²ßÛ 
Make a page announcement through an external loudspeaker sys tem.
Internal and external page
²ßÜ and zone (0 to 6) 
Make a page announcement  through both your telephone speakers  and an 
external loudspeaker system. Zone 0 pages all zones.
²à¡
Program in an exte rnal autodial sequence to inse rt a 1.5 second delay ›.
For pulse dialing: 
¥ also inser ts a 1.5 second delay.
²ßá
Interrupt a person who is on a call.
A person on another call can press
²¡Þ(Do Not Disturb) to block 
priority...

 
²ßà
Save a number to redial later. Enter the code while you are on a call that you 
have dialed to save the number. Enter the code when you are not on a call to 
redial the saved number.
Show service schedules ²¡àâ
Display the modes that have been turned on at a designated control  set.
Ringing service
²¡àÚCancel ²£¡àÚ
Turn on one of six schedules for alternative ringing/call answering 
arrangements from a designated control telephone.
Restriction services
²¡àÛCancel ²£¡àÛ
Tur n on one of six se rvices...

 
²¡âßCancel ²£¡âß
Change the first line of the display to the current time and date.
²¡âÜ
Briefly display the time and date while you are on a call.
²àâ
Send a call to another telephone within your system, or to an external 
telephone. You may not be able to transfer a call on an exter nal line to an 
external telephone, depending on the capabilities of the lines.
1. Make or answer a call.
2. Press ² àâ.
3. Call the person you want to transfer the call to.
4. Stay on the line if you wish to speak to the...

 
The following features are available only if you subscribe to Call Display 
services or to special line services from your local telephone company.
²¡ÚÞCancel ²£¡ÚÞ
Have the system automatically delete the oldest log item from a full Call Log, 
so that a new log item can be stored.
²¡ÚÚ
Display the name, number or line name of a ringing or held call. Press £ to 
move through the information displays.
²¡ÚÛ
Call Log displays use the following special characters:
1(underline) identifies a new item...