Nortel Modular Ics 6.0 Installer Guide

P0992638 03Modular ICS 6. 0 Installer Guide
Regulations
This equipment meets all applicable requirements of CSA and UL safety 
standards for North America and relevant EN60950 specifications for 
European markets.
Safety and installation 
This symbol (if applicable) on the product is used to identify the following 
important information:
For equipment with internal power supplies
• Mains nominal AC voltage 110-120 V~;  60Hz
 Mains nominal AC  voltage 220-240 V~;  50Hz
The shock hazard symbol within an...

22 / Regulations
Modular ICS 6.0 Installer GuideP0992638 03
For equipment with external power supplies
Must be powered from an approved Class 2 power source.
For current ratings, refer to product specific documentation and product 
labels.
Important safety instructions
When using  your telephone equipment, basic safety precautions should 
always be followed to reduce the risk of fire, electric shock and injury of 
persons, including the following:
Follow the warnings and instructions marked on the...

Regulations / 23
P0992638 03Modular ICS 6. 0 Installer Guide
c. If the product housing has been damaged.
d. If the product exhibits a distinct change in performance.
Avoid using telephone equipment during an electrical storm.  There 
may be a remote risk of electric shock from lightning.
Do not use the telephone equipment to report a gas leak in the vicinity 
of the leak.
To eliminate the possibility of accidental damage to cords, plugs, 
jacks, and the telephone equipment, do not use sharp...

24 / Regulations
Modular ICS 6.0 Installer GuideP0992638 03
Changes or modifications not expressly approved by the party responsible 
for compliance could void the user’s authority to operate the equipment.
Devices intended to be connected to the Public Switched Telephone 
Network
US
This telephone equipment complies with Part 68, FCC Rules for direct 
connection to the Public Switched Telephone Network (The FCC 
registration number appears on a label affixed to the ICS).
Your connection to the telephone...

Regulations / 25
P0992638 03Modular ICS 6. 0 Installer Guide
In some states, customers are permitted to install their own jacks.
The equipment cannot be used with or connected to a party line or a 
public coin phone service provided by the telephone company. 
Connection to Party Line Service is subject to state tariffs. Contact the 
Public State Utility Commission, Public Service Commission or 
Corporation Commission for information.
It is no longer necessary to notify the Telephone Company of your...

26 / Regulations
Modular ICS 6.0 Installer GuideP0992638 03
The telephone company may make changes in its facilities, equipment, 
operations or procedures that could affect the operation of the 
equipment.  If this happens the telephone company will provide 
advance notice in order for you to make necessary modifications to 
maintain uninterrupted service.
Do not attempt to repair this equipment yourself.  If trouble is 
experienced with this equipment, please refer to the repair and 
warranty...

Regulations / 27
P0992638 03Modular ICS 6. 0 Installer Guide
the telecommunications company cause to request the user to disconnect 
the equipment.
Users should ensure for their own protection that the electrical ground 
connections of the power utility, telephone lines and internal metallic water 
pipe system, if present, are connected together. This precaution may be 
particularly important in rural areas. 
This Class A digital apparatus meets all requirements of the Canadian 
Interference-Causing...

28 / Regulations
Modular ICS 6.0 Installer GuideP0992638 03
Canada
The Ringer Equivalence Number (REN) assigned to each terminal device 
provides an indication of the maximum number of terminals allowed to be 
connected to a telephone interface. The termination on an interface may 
consist of any combination of devices subject only to the requirement that 
sum of the ringer equivalence numbers of all the devices does not exceed 5.
Hearing aid compatibility
The telephone station sets are compatible with...

Regulations / 29
P0992638 03Modular ICS 6. 0 Installer Guide
CE marking
The Industry Canada label identifies certified equipment. This certification 
means that the equipment meets certain telecommunications network 
protective, operational and safety requirements. The Department does not 
guarantee the equipment will operate to the user’s satisfaction. 

30 / Regulations
Modular ICS 6.0 Installer GuideP0992638 03