Nortel M7100 Enterprise Edge Quick Reference Guide

							© 2000 Nortel Networks
P0908511 Issue 03
Enterprise Edge
M7100
Quick Reference Guide 
						

							Page 1  Enterprise Edge M7100 Quick Reference Guide
Your Enterprise Edge M7100 telephone
Using Button InquiryCheck what is programmed on your memory button.
1. Release all calls or lines with dial tone.
2. Press Ä¥â.
3. Press the button that you want to check.
4. Read the display.
5. Press 
Ä when finished.
Adjusting the display 
contrast1. Press Ä¥à.
2. Press Ú to á for the level you want; the higher the number 
the higher the level.
Selecting a ring type and 
volume level1. Press Ä¥ß.
2. Press Ú, Û, Ü or Ý to hear the different ring types.
3. While the telephone is ringing, press à to adjust 
the volume level.
4. Press 
Ä 
to store the ring.
Adjusting the handset or 
telephone speaker volume1. Press à when using the handset or the speaker.
Display
shows the time, date, call information, and guides you.
Feature button
starts or ends a feature. Release button
cancels active calls
Hold button Dial pad
Volume control Memory button
is programmable to store a feature or to
automatically dial internal or external
number. 
						

							Page 2  Enterprise Edge M7100 Quick Reference Guide
Making and answering calls
Answering calls1. When your telephone rings, lift your handset.You are immediately connected to the call.
Making external calls
Depending upon the dialling mode programmed for your 
telephone, you may be able to dial your call before lifting your 
handset.
1. Pick up the handset.
2. Dial â (your system’s exchange line access code or a line 
pool access code).
3. Dial the external telephone number.
Making internal calls1. Pick up the handset.
2. Dial the internal number.
Note: Extension numbers and the exchange line access code 
are supplied by your System Administrator.
Making or answering a 
second call
The M7100 telephone allows you to have two calls active at 
the same time.
You can switch between calls using ú.
To answer a second call while on another call
1. Press ú to put the first call on hold.The second call automatically comes onto the line.
To hold a call and make a second call
1. Press ú to put the first call on hold.
2. Dial the telephone number for the second call.
To return to the first call
1. Press ú again to return to the first call on hold.The second call is automatically put on hold.
ú
To hold a call 
1. Press ú.
2. Press ú again to return to the call on hold.Check the display for confirmation or additional information.
Note: If you have difficulty selecting a line on your M7100 
telephone, ask your System Administrator to check your 
telephones programming. Your telephone must be assigned to 
use an exchange line or line pool. 
						

							Page 3  Enterprise Edge M7100 Quick Reference Guide
Programming the memory button
Remember: Press Ä¥â to check a memory or 
line button.
Programming the memory 
button
External Autodial
1. If you are on a call or a line with dial tone, press ú or ¨.
2. Press Ä¥Ú. 
3. Dial the external number.
4. Press 
ú to store the number.
5. Label your new button.
Internal Autodial
1. If you are on a call or a line with dial tone, press ú or ¨.
2. Press Ä¥Û. 
3. Dial the extension number.
4. Label your new button.
Features
1. If you are on a call or a line with dial tone, press ú or 
¨.
2. Press Ä¥Ü. 
3. Press Ä and the feature code.
4. Label your new button.
Erasing the memory button
1. If you are on a call or a line with dial tone, press ú or ¨.
2. Press Ä¥Ú. 
3. Press ú to erase the button.
NoticeThis telephone now conforms to the latest standards in 
relation to the positioning of Q and Z on the number keys. The 
Q appears on key number 7 and the Z appears on key 
number 9.  About the 
memory buttonThe memory button can store a 
telephone number or feature code to 
give you one touch dialling or feature 
activation. You can change the 
memory button by programming it 
with a new number or feature code.
Memory button 
						

							Page 4  Enterprise Edge M7100 Quick Reference Guide
Setting up the telephone
Connecting the cordsATTENTION Before attempting 
to carry out 
any work on the 
telephone, ensure that the line 
cord is unplugged from the wall 
socket.
To remove any of the cords, 
squeeze the release latch on the 
plug and gently pull the plug 
from the socket.
Connect the handset cord to the 
jack labelled with the telephone 
icon and route the cord as 
shown.
Route the line cord through the 
stand and connect the cord to 
the telephone jack that is 
marked with the jack icon.
Attach the stand using the slots 
on the back of the telephone.
Once the above work is 
complete, plug the line cord back 
into its wall socket.
Connect to jack 
from  distribution block
Connect to receiver 
						

							Page 5  Enterprise Edge M7100 Quick Reference Guide P0908511  Issue 03
Setting up the telephone
Mounting the
telephone on
the wall