Nortel M7100 Enterprise Edge Quick Reference Guide

© 2000 Nortel Networks
P0908511 Issue 03
Enterprise Edge
M7100
Quick Reference Guide 

Page 1  Enterprise Edge M7100 Quick Reference Guide
Your Enterprise Edge M7100 telephone
Using Button InquiryCheck what is programmed on your memory button.
1. Release all calls or lines with dial tone.
2. Press Ä¥â.
3. Press the button that you want to check.
4. Read the display.
5. Press 
Ä when finished.
Adjusting the display 
contrast1. Press Ä¥à.
2. Press Ú to á for the level you want; the higher the number 
the higher the level.
Selecting a ring type and 
volume level1. Press Ä¥ß.
2. Press Ú, Û, Ü...

Page 2  Enterprise Edge M7100 Quick Reference Guide
Making and answering calls
Answering calls1. When your telephone rings, lift your handset.You are immediately connected to the call.
Making external calls
Depending upon the dialling mode programmed for your 
telephone, you may be able to dial your call before lifting your 
handset.
1. Pick up the handset.
2. Dial â (your system’s exchange line access code or a line 
pool access code).
3. Dial the external telephone number.
Making internal calls1. Pick...

Page 3  Enterprise Edge M7100 Quick Reference Guide
Programming the memory button
Remember: Press Ä¥â to check a memory or 
line button.
Programming the memory 
button
External Autodial
1. If you are on a call or a line with dial tone, press ú or ¨.
2. Press Ä¥Ú. 
3. Dial the external number.
4. Press 
ú to store the number.
5. Label your new button.
Internal Autodial
1. If you are on a call or a line with dial tone, press ú or ¨.
2. Press Ä¥Û. 
3. Dial the extension number.
4. Label your new button....

Page 4  Enterprise Edge M7100 Quick Reference Guide
Setting up the telephone
Connecting the cordsATTENTION Before attempting 
to carry out 
any work on the 
telephone, ensure that the line 
cord is unplugged from the wall 
socket.
To remove any of the cords, 
squeeze the release latch on the 
plug and gently pull the plug 
from the socket.
Connect the handset cord to the 
jack labelled with the telephone 
icon and route the cord as 
shown.
Route the line cord through the 
stand and connect the cord to...

Page 5  Enterprise Edge M7100 Quick Reference Guide P0908511  Issue 03
Setting up the telephone
Mounting the
telephone on
the wall