Nortel Enterprise Edge Telephone Feature Instructions Manual

© 1999 Nortel Networks
P0908931 Issue 01
Enterprise Edge
Telephone Feature
Card 

Page 1 - Enterprise Edge Telephone Feature Card
1. Press Ä and enter the desired feature code on the dial pad.
or
Press a programmed memory button.
2. Follow the display messages.
On a two-line display telephone, some features are also available on display 
buttons.
You can program memory buttons for one-touch access to frequently used 
features.
1. Press 
Ä¥Ü.
2. Press the memory button that you want to program. (This step is not necessary 
on the M7100 telephone.)
3. Press 
Ä and enter the feature code...

Page 2 - Enterprise Edge Telephone Feature Card
Ä¡âÚ
Answer the next call. If more than one call is waiting, priority is given to incoming 
external calls over callback, camped, or transferred calls.
Ä¡ÛRe-route a call to another telephone even if all its lines are busy.
Press 
Ä¡Û, then dial the extension number of the receiving 
telephone.
Äß¡Change the dialing filters on a line or telephone, or gain external access to your 
system. Dialing filters determine which numbers you can dial.
Press 
Äß¡ and...

Page 3 - Enterprise Edge Telephone Feature Card
Automatic Dial: Dial the number without choosing a line button first. Your prime 
line is automatically selected for the call.
Pre-Dial: Dial the number, then press a line button to place the call. Edit the 
number by pressing 
à before placing the call.
Ä¡ÞCancel Ä£¡ÞWhen you are not on a call prevent all incoming calls, except priority calls, from 
ringing at your telephone. When you are on a call, block an incoming priority call.
Ä¡âÛCancel Ä£¡âÛUse both...

Page 4 - Enterprise Edge Telephone Feature Card
ÄÚCancel Ä£Ú
Send a message to an Enterprise Edge telephone’s display to have someone call 
you back.
To view and reply to your messages:
1. Press 
ÄßÞ.
2. Press 
¥ and £ to view your message list.
3. Press 
â to call the person who left you the message.
To erase a message:
1. Press 
ú while viewing a message.
Ä¥¡ÚChange the position of your line or hunt group buttons.
1. Press 
Ä¥¡Ú.
2. Press the line button that you want to move.
3. Press the button that...

Page 5 - Enterprise Edge Telephone Feature Card
Ä¡ÜChange the privacy setting for an external line. If a line normally has privacy, this 
permits another telephone that shares the line to join your call by selecting the 
line while you are using it. If a line normally has privacy disabled, this prevents 
another telephone that shares the line from joining your call by selecting the line 
while you are using it. The privacy setting is re-established once you end your call 
or when you enter the Privacy...

Page 6 - Enterprise Edge Telephone Feature Card
Ä¡àÜCancel Ä£¡àÜ
Turn on one of six services for routing on par ticular lines or telephones from a 
designated control telephone. You will be required to enter the System 
Coordinator password.
ÄâDial an external telephone number using a two-digit code. There are two types of 
speed dial codes: system (01 to 70) and personal (71 to 94). System speed dial 
codes can be used from any Enterprise Edge telephone in the system. They are 
assigned by your system...

Page 7 - Enterprise Edge Telephone Feature Card
Ä¡¡Cancel Ä£¡¡Prevent your telephone from receiving voice calls. 
Do Not Disturb (
Ä¡Þ) also prevents your telephone from receiving 
voice calls.
Ä¡âÝProgram in an external autodial number to cause the system to wait to receive dial 
tone 
à from another system before proceeding with the dialing sequence.
The following features are available only if you subscribe to Call Display services 
from your local telephone company.
Ä¡ÚÞCancel Ä£¡ÚÞHave the system...