Nortel Enterprise Edge M7208N Instructions Manual
Here you can view all the pages of manual Nortel Enterprise Edge M7208N Instructions Manual. The Nortel manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 1
© 2000 Nortel Networks P0908518 Issue 02 Enterprise Edge M7208N User Card
Page 2
Page 3
Page 1 Enterprise Edge M7208N User Card Your Enterprise Edge M7208N telephone Using Button InquiryCheck what is programmed on your memory buttons. 1. Release all calls or lines with dial tone. 2. Press Ä¥â. 3. Press the button(s) that you want to check. 4. Read the display. 5. Press Ä when finished. Adjusting display contrast1. Press Ä¥à. 2. Press Ú to á on the dial pad for the contrast level you want; the higher the number the higher the contrast level. Selecting a ring type and volume level1....
Page 4
Page 2 Enterprise Edge M7208N User Card Making and answering calls Answering calls Answering calls using the handset When your telephone rings, or ¼ flashes beside an Intercom or line button: 1. Lift the handset. OR Press the button beside the flashing ¼ before lifting the handset. Answering calls using Handsfree When your telephone rings, or ¼ flashes beside an Intercom or line button: 1. Press ©. Making calls Depending upon the dialling mode programmed on your telephone, you may have to lift...
Page 5
Page 3 Enterprise Edge M7208N User Card Programming memory buttons Remember: Press Ä¥â to check a memory or line button. Programming memory buttonsExternal Autodial 1. If you are on a call or a line with dial tone, press ú or ¨. 2. Press Ä¥Ú. 3. Press a memory button. 4. Dial the external number. 5. Press ú to store the number. 6. Label your new button. Internal Autodial 1. If you are on a call or a line with dial tone, press ú or ¨. 2. Press Ä¥Û. 3. Press a memory button. 4. Dial the...
Page 6
Page 4 Enterprise Edge M7208N User Card Setting up the telephone Notice These telephones now conform to the latest standards in relation to the positioning of Q and Z on the number buttons. The Q appears on button number 7 and the Z appears on button number 9. Connecting the cords AT T E N T I O N Before attempting to carry out any work on the telephone, ensure that the line cord is unplugged from the wall socket. To remove any of the cords, squeeze the release latch on the plug and gently pull...
Page 7
Page 5 Enterprise Edge M7208N User Card 12 cm Setting up the telephone Mounting the telephone on the wall Page 5 Enterprise Edge M7208N User Card P0908518 Issue 02