Nortel Enterprise Edge M7208 Instructions Manual
Here you can view all the pages of manual Nortel Enterprise Edge M7208 Instructions Manual. The Nortel manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 1
© 1999 Nortel Networks P0908512 Issue 01 Enterprise Edge M7208 User Card
Page 2
Page 3
Page 1 Enterprise Edge M7208 User Card Your Enterprise Edge M7208 telephone Using Key Inquiry Check what is programmed on your memory keys. 1. Release all calls or lines with dial tone. 2. Press Ä¥â. 3. Press the key(s) that you want to check. 4. Read the display. 5. Press Ä when finished. Adjusting display contrast1. Press Ä¥à. 2. Press Ú to á on the key pad for the contrast level you want; the higher the number the higher the contrast level. Selecting a ring type and volume level1. Press Ä¥ß....
Page 4
Page 2 Enterprise Edge M7208 User Card Making and answering calls Answer ing calls Answering calls using the handset When your telephone rings, or ¼ flashes beside an Intercom or line key: 1. Lift the handset. OR Press the key beside the flashing ¼ before lifting the handset. Answering calls using Handsfree When your telephone rings, or ¼ flashes beside an Intercom or line key: 1. Press ©. Making calls Depending upon the dialling mode programmed on your telephone, you may have to lift the handset...
Page 5
Page 3 Enterprise Edge M7208 User Card Programming memory keys Remember: Press Ä¥â to check a memory or line key. Programming memory keysExternal Autodial 1. If you are on a call or a line with dial tone, press ú or ¨. 2. Press Ä¥Ú. 3. Press a memory key. 4. Dial the external number. 5. Press ú to store the number. 6. Label your new key. Internal Autodial 1. If you are on a call or a line with dial tone, press ú or ¨. 2. Press Ä¥Û. 3. Press a memory key. 4. Dial the extension number. 5....
Page 6
Page 4 Enterprise Edge M7208 User Card Setting up the telephone Notice These telephones now conform to the latest standards in relation to the positioning of Q and Z on the number keys. The Q appears on key number 7 and the Z appears on key number 9. Connecting the cords AT T E N T I O N Before attempting to carry out any work on the telephone, ensure that the line cord is unplugged from the wall socket. To remove any of the cords, squeeze the release latch on the plug and gently pull the plug...
Page 7
Page 5 Enterprise Edge M7208 User Card Setting up the telephone Mounting the telephone on the wall Page 5 Enterprise Edge M7208 User Card P0908512 Issue 01