Norstar Compact 616 Dr5 Installer Guide

 
  (General admin: 9. Call 
cooled from:
  LineY N Line
Y N
LineY N 
I Line
Y N
LineY N Line
Y N
LineY N I Line
Y N
LineY N 
 Line Y N
LineY N 
 Line
Y N
Show extl 
LineY N  Line
Y N
LineY N 
 Line
Y N
LineY N 
 Line
Y N
LineY N Line
Y N
LineY N 
 Line
Y N
LineY N 
 Line
Y N
Log Space
1 st Display
Name Name
Number Number
I 
Line
Line
Line
Line
Line
Line
Line
Line
Line
Line
Line
LineY N Line
Y N Line
Y N 
Y N Line
Y N Line
Y 
 Line
Y N 
 Line
Y N Line
Y N Line
Y N Line
Y N 
 Line
Y N 
 LineY N
Y N
Y N
Y...

Page10
Programming glossary
1st displaySelect the first  to be displayed by the Call Display features. The default is Name.
Other settings are Number and Line. Name or Number only appear if you have subscribed to
Call Display services, otherwise line name will appear as the default.
Admin. passwordAssign a 1 to  password for security. The default is  (23646).
Answer Up to four buttons on a telephone can be programmed for answering calls to the  of other
telephones. The default is No Answer 
Auto Call...

Page 11
DRT to prime, Delayed Ring Transfer automatically  unanswered  to a Prime  Choose Yes to activate DRT. 
ExceptionsEnter any number of exceptions to the restrictions, as long as the total number of restrictions and
 for the svstem does not exceed 200.
External codeAssign the one digit External tine access  or none. This code allows an  Telephoneor an  to access external lines.
Extra-dial telephone
Filter 
Forward no answer
Forward on busy
Full 
Full handsfreeIf 
a Direct-dial telephone is also a...

‘age 12
Individual Change the Directory Number (DN) of a telephone. All  must be the same length. The first
digit of a new DN cannot be the same as the External Line access code or 0.
Note:Changing an individual DN locks the configuration session into System Data mode, and
when the session ends, you have to m-enter the Configuration access code and the
Installer password to continue with programming.
Installer passwordChange the one to six character Installer password used to enter Configuration...

Page 13
On hold
Paging
Page zone
Park prefix
Park timeout
Password
Pickup group
Prime line
Prime set
Receive tones
 delay
Reset  logs
Restrictions
Ringing
Service Modes
A caller waiting oh hold  hear Music (from a  such as  radio  to the KSU),
periodic Tones or Silence. 
 default is Tones. 
Allows announcements to be made from a  telephone. The default is Yes.
By default, a telephone falls into Page Zone 1. Enter a digit from 2 to 3 to change the page zone
for this telephone, or change the setting to No...

Page 14
Show Line 
Ringing Sets
Auxiliary ringer
Speed dial 
Use prime line,
Use line:-,
Pool 
Start time:
Stop time:
System-speed dial
System Data
System Version
Time and date
Trunk/Line Data
Transfer callback
Trunk answer
Trunk data
User filter
 center 
   lines
 Enter the  of an   which requires   telephones (a line can have
multiple ringing telephones).
Enter the 
 of the telephones that should ring for calls on that line.
You can also make the Auxiliary ringer ring for calls on that line.
Assign...

Programming defaults
A. 
1.  Data  7)
 line: Trunk data
 Dial modeTone
Full 
 N
Private to:. Pool
2. Line Access (p. 8)
Show  
tine assignment01.02.03.04.05.06ADD or  line
Answer No Answer Add 
Ringing (All assigned Trunklines)Ring
No Ring
  (A-C) accessY N
 keys
 fineNone 
3. Call Handling (p. 3)
 
 
 
Music, 
4. Miscellaneous (p. 3)
gmd musicYN
 N
  
YN
 
 (blank)
1 to 4 valid digits
 Installer pswd.
‘System Data (p.. 3)
  New-]
B. General admin
 Sys speed dial  (24   
NumberNo number LinePrime!
Line...