Nokia 6200 User Guide

[ 32 ]
Enter punctuation and special characters
While at any text entry screen in standard mode, press s to display 
special characters. If predictive text is on, press and hold 
s to display 
special characters. The following characters are available:
Use four-way scrolling
Navigate special characters using the scroll 
keys much as you would a joystick. Once a 
character is highlighted, press
 Insert to 
insert the character into your message.
  PREDICTIVE TEXT INPUT
Predictive text allows you to...

[ 33 ]Text entry
2Scroll to the language of your choice and press 
Select. Predictive text 
is turned on. The predictive text icon ( ) appears in the upper left 
corner of the display.
Note: The language setting in predictive text affects the time and 
date formats of the clock, alarm clock, and calendar.
Write with predictive text
For example, to write Nokia with the English dictionary selected, press each 
of the following keys only once: (with predictive text 
on). The illustration 
below simulates...

[ 34 ]
Add new words to the dictionary
If you encounter a word that predictive text does not recognize, a 
question mark (
?) follows the word and 
Spell appears in the lower 
left of the display.
Press 
Spell, enter your new word using the keypad, and press 
Save. 
The word is added to the dictionary as well as to the message you 
are writing.
NOTES ABOUT ADDING WORDS
 New words that you accept by pressing 
Select, 
0, or deleting the 
space between two words are saved to the dictionary.
 Depending...

[ 35 ]Manage phone security
6 Manage phone security
Lock the keypad (Keyguard)
Remember to lock your phone keypad to prevent accidental calls. If the 
keypad is locked, it unlocks when you receive a call. After the call, the lock 
automatically reactivates.
Important: When the phone is locked, calls may be possible to 
emergency numbers (for example, 911). Key in the emergency 
number and press 
h. The number appears in the display after you 
have keyed in the last digit.
To lock the keypad, press 
Menu...

[ 36 ] 2Enter the security code and press 
OK. 
3Scroll to 
Off, 
Memory, or 
Phone and press 
Select. A message appears 
in the display confirming your selection
  FIXED DIALING
Once you setup and activate a fixed dialing list, your phone can make calls 
only to those numbers that you have defined in the fixed dialing list. Fixed 
dialing is a network feature and must be supported by your wireless provider.
Note: When fixed dialing is set on, calls may be possible to certain 
emergency numbers in some...

[ 37 ]Manage phone security
5Enter a name for the number and press 
OK. A confirmation note 
appears in the display and you are returned to the fixed dialing 
number list.
6Press 
Back, scroll to 
On, and press 
Select to activate fixed dialing.
View or edit the fixed dialing list
1At the Start screen, press 
Menu 4-8-3 (
Settings > Security Settings > 
Fixed dialing).
2Scroll to 
Number list and press 
Select. You are prompted to enter the 
PIN2 code.
3Enter the PIN2 code and press 
OK. Any numbers...

[ 38 ]  If you try to browse the fixed dialing list, but have not stored any 
numbers, 
Fixed dialing list empty appears in the display.
 You cannot access SIM memory manually (view or copy numbers on 
the SIM card) while fixed dialing is active.
Closed user groups
A closed user group is a network service that specifies the group of people 
whom you can call and who can call you. For more information contact 
your network operator or service provider.
Note: When calls are limited to closed user groups,...

[ 39 ]Manage phone security
3Enter the new security code (up to 10 characters) and press 
OK. 
You are asked to re-enter the new security code for verification.
4Enter the new security code again and press 
OK. A message appears 
in the display confirming your security code has been changed.
PIN code
The PIN code protects the SIM card from unauthorized access. The PIN code 
can be 4-8 digits in length. After three successive incorrect entries the PIN 
code is blocked and you will be asked to enter the...

[ 40 ]
PIN2 Code
The PIN2 code is required for features such as fixed dialing. If you enter 
an incorrect PIN2 code three times in succession, the PIN2 code is blocked 
and you will have to enter the PUK2 code.
Note: The original PIN2 code must be obtained from your 
wireless provider.
CHANGE YOUR PIN2 CODE
1Press 
Menu 4-8-6-3 (
Settings > Security settings > Access codes > 
Change PIN2 code). You are prompted to enter the current PIN2 code.
2Enter the current PIN2 code and press 
OK. You are prompted...

[ 41 ]Contacts
7Contacts
Your contacts list can save up to 500 names, with multiple numbers and 
text notes for each name. The amount of numbers and text entries that 
you can save may vary, depending on their length and the total number 
of entries in the contacts list.
Note: This feature uses shared memory. See “Shared memory” on 
page 12 for more information.
  VIEW THE CONTACTS LIST
1At the Start screen, press the right selection key (c) under 
Contacts. 
The menu items in the left column of the...