Nokia 3200 User Guide

							Nokia 3200 User Guide 19Copyright © Nokia 2003 Basic operations
  OPTIONS DURING A CALL
Many of the options that you can use during a call are network services. During a 
call, select Options and one of the following: 
Mute—Mute your voice; you can hear the other party but they cannot hear you.
Unmute—Return to normal from mute status.
End call—End the call.
End all calls—End all calls within a conference call.
Contacts—Open the contacts menu.
Menu—Display the main menus.
Hold—Place the current call on hold.
Unhold—Remove the current call from hold status.
Lock keypad—Lock the keypad to prevent an accidental key press.
New call—Place a new call; the first call is put on hold.
Conference—Call another party and invite them into the call.
Private—Have a private conversation with one participant in a conference call.
Answer—Answer another incoming call.
Reject—Reject a call; the calling party receives a busy signal.
Loudspeaker—Enable the handsfree feature in your phone.
Handset—Disable handsfree and return to normal use (earpiece).
Touch tones—Send touch tones generated by your phone keypad.
Swap—Switch between the active call and the call on hold.
Transfer— C o n n e c t  a  c a l l  o n  h o l d  t o  a n  a c t i v e call, and disconnect yourself from the 
calls.
Headset or Handsfree—Switch the active call to a compatible accessory when the 
accessory is connected to the phone.
Record—Make an audio recording of the call. (See “Voice recorder” on page 81 for more information.)
Auto volume on or Auto volume off—Set the automatic volume control on or off 
(See “Automatic volume control” on page 68 for more information.) 
						

							20 Copyright © Nokia 2003
5 Text entry
You can use two methods for entering text and numbers.
Standard mode is the only way to enter names into contacts and to rename 
caller groups.
Predictive text input is a quick and easy method for writing messages.Press the # key to switch predictive text on or off and to use predictive text in various 
modes. Press and hold the # key to switch between text and numeric entry. As you 
press the # key, the following icons (not the descriptions) appear in the upper left of 
the display:
  STANDARD MODE
Enter text (Abc)
 Press a key once to insert the first letter on the key, twice for the second letter, 
etc. If you pause briefly, the last letter in the display is accepted and your 
phone awaits the next entry.
 Select Clear to backspace the cursor and delete a character. Select and hold Clear to backspace continuously and delete characters.Press the 0 key to enter a space and accept a completed word.Press the 1 key to enter a period (.). Press the * key to display special characters. See “Punctuation and special characters” on page 22.
Enter numbers (123)
To switch to 123 mode from Abc mode, press and hold the # key at any message 
entry screen until the icon in the upper left corner of the display switches from Abc 
to 123 (or vice versa).
IconIndicates...
Uppercase text. Predictive text is off.
Lowercase text. Predictive text is off.
Sentence case text. Predictive text is off.
Sentence case text. Predictive text is on.
Lowercase text. Predictive text is on. 
						

							Nokia 3200 User Guide 21Copyright © Nokia 2003 Text entry
 PREDICTIVE TEXT INPUT
Predictive text input allows you to write messages quickly using your keypad and 
the built-in phone dictionary. It is much faster than using the standard mode 
“multitap” method. You can use predictive text to write a message, or create a 
calendar note.
Note: When predictive text is on, the icon  appears in the upper left corner of the display. When predictive text is off, the icon  appears in the upper left corner of the display. 
Activate predictive text
1At any text entry screen, select and hold Options. ORAt a text entry screen, select Options > Predictive text.
2Select the language of your choice.A confirmation message shows that predictive text is turned on. 
Enter text
 For each letter of the word that you want to spell, press the corresponding key 
on your keypad only once, even if the letter you want is not the first letter on 
the key. The phone predicts the word you are trying to spell.
 If a displayed word is not correct, press the * key to see other matches. To 
move forward through a list of matches, keep pressing the * key. To return to 
the previous word in the list of matches, select Previous.
Press the 0 key to accept the word, enter a space, and begin writing the next 
word.
If ? appears after a word, select Spell to add the word to the dictionary. See “Add new words to the dictionary” on page 21.Press the 1 key to insert a period into your message. Press and hold the * key to display special characters. See “Punctuation and special characters” on page 22.
Compound words
Enter the first part of the word and confirm it by pressing the Scroll right key. Enter 
the last part of the word and confirm it by pressing the 0 key.
Add new words to the dictionary
If you encounter a word that predictive text does not recognize, a question mark 
(?) follows the word and Spell appears in the lower left of the display. 
						

							22 Copyright © Nokia 2003
Select Spell, enter your new word using the keypad, and select Save. The word is 
added to the dictionary and to the message that you are writing.
Keep these factors in mind when adding words:
 New words that you accept by selecting Save, the 0 key, or deleting the space 
between two words are saved to the dictionary.
 Depending on the language and the length of the words, you may be able to 
add hundreds of words to the dictionary.
 When the dictionary is full, the most recent addition replaces the first.
Predictive text example
To write Nokia with predictive text on and with the English dictionary selected, 
press each of the following keys once:
     the 6 key      the 6 key     the 5 key      the 4 key    the 2 key
The illustration above simulates your display each time a key is pressed.
  PUNCTUATION AND SPECIAL CHARACTERS
While at any text entry screen, press the * key to display special characters (press 
and hold the * key if predictive text is on).
Navigate through the list of special characters by using the four-way scroll keys 
like a joystick. Once a character is highlighted, select Insert to insert the character 
into your message. 
						

							Nokia 3200 User Guide 23Copyright © Nokia 2003 Phone security
6 Phone security
An array of security features prevents accidental calls, allows you to restrict the 
calls your phone can make and receive, and keeps your stored information safe. 
  KEYGUARD
With Keyguard, you can lock the keypad to prevent keys from being pressed 
accidentally. 
If the keypad is locked, it unlocks when you receive a call. After the call, the lock 
automatically reactivates.
Lock the keypad
Select Menu > * key.
Unlock the keypad
Select Unlock > * key.
When the Keyguard is on, calls still may be possible to the official emergency 
number programmed into your phone. Enter the emergency number and press the 
Talk key.
  PIN CODE REQUEST
The PIN code protects the SIM card from unauthorized access. The PIN code can be 
4–8 digits in length. After three successive incorrect entries the PIN code is blocked 
and you will be asked to enter the personal unblocking key (PUK) code.
Note: The PIN code must be obtained from your service provider. The PIN code is typically provided with your SIM card.
Enable your phone to request the PIN code upon power-up. This provides extra 
security in case your phone is lost or stolen.
1From the menus, select Settings > Security settings > PIN code request.After a brief pause, you are prompted to enter the current PIN code. 
2Enter the PIN code and select OK.3Scroll to On and select OK. A message appears in the display confirming your selection. 
						

							24 Copyright © Nokia 2003
  CALL RESTRICTIONS
This network service lets you restrict the calls your phone can make and receive. 
Check with your service provider for details.
When calls are restricted, calls still may be possible to the official emergency number 
programmed into your phone.
Turn on call restrictions
1From the menus select Settings > Security settings > Call restrictions and 
one of the following:
Outgoing calls—Calls cannot be made.
International calls—Calls cannot be made to foreign countries.
Int. calls except to home country—When abroad, calls can be made only 
within the current country and to your home country (that is, the country 
where your home network operator is located).
Incoming calls—Calls cannot be received.
Incoming calls if roaming—Calls cannot be received outside your home area.
Cancel all call restrictions—Turns off all call restrictions. Calls can be made 
and received in the usual way.
Note: If you selected Cancel all call restrictions, the following steps are not available. Also, you can cancel call restrictions on each option, 
allowing restrictions on other options to stay in force.
2Scroll to one of the following:Activate—Enter the restriction password and select OK.
Cancel—Enter the restriction password and select OK.
Check status—The phone lists the call types with call restriction active.
3Select OK.
Change your restriction password
Contact your service provider for your original restriction password.
1From the menus, select Settings > Security settings > Access codes > 
Change restriction password.
2Enter your new password, and select OK. 
						

							Nokia 3200 User Guide 25Copyright © Nokia 2003 Phone security
  FIXED DIALING
Once you set up and activate a fixed dialing list, your phone can make calls only to 
those numbers that you have defined in the fixed dialing list. Fixed dialing is a 
Network Service and must be supported by your service provider.
When fixed dialing is activated, calls still may be possible to the official emergency 
number programmed into your phone.
Set up and activate a fixed dialing list
1From the menus, select Settings > Security Settings > Fixed dialing. After a brief pause, the following options appear in the display:
On—Activate fixed dialing.
Off—Deactivate fixed dialing.
Number list—View the numbers in your fixed dialing list.
Note: If you activate fixed dialing and the number list is empty, all outgoing calls, except for the emergency number(s) programmed into your 
phone, require entry of the PIN2 code.
2Select Number list. Fixed dialing not active and then Fixed dialing list empty appear in the 
display.
You are prompted to enter the PIN2 code. 
3Enter the PIN2 code and select OK.4Enter the fixed dialing number, or select Find to retrieve a number from 
contacts and select OK.
5Enter a name for the number and select OK. A confirmation note appears in the display and you are returned to the fixed 
dialing number list.
6Select Back > On to activate fixed dialing.
View or edit the fixed dialing list
1From the menus, select Settings > Security Settings > Fixed dialing > 
Number list.
You are prompted to enter the PIN2 code. 
2Enter the PIN2 code and select OK.Any numbers which you have assigned to fixed dialing appear in the display.
3Scroll to a number and select Options. The following options appear in the display.
View number—View the number for an entry. 
						

							26 Copyright © Nokia 2003
Add—Add a number to your fixed dialing list.
Edit—Edit the highlighted entry.
Delete—Delete the highlighted entry.
Delete all—Delete all entries in your fixed dialing list.
4Select the desired option.
Notes about fixed dialing
 If a SIM card with fixed dialing that is activated is inserted into a phone that 
does not support fixed dialing, the SIM card is rejected.
 If you try to add a name without a number to the fixed dialing list, you will 
receive an error message.
 If you try to browse the fixed dialing list but have not stored any numbers, 
Fixed dialing list empty appears in the display.
 You cannot access SIM memory manually (view or copy numbers on the SIM 
card) while fixed dialing is active.
  CLOSED USER GROUPS
This network service specifies the group of people whom you can call and who can 
call you. Default resets the phone to use a user group that the SIM card owner has 
agreed upon with the service provider.
When calls are limited to closed user groups, calls still may be possible to the 
official emergency number programmed into your phone.
Turn on closed user groups
1From the menus, select Settings > Security settings > Closed user group > 
On.
2Enter the group number, then select OK.
Turn off closed user groups
From the menus, select Settings > Security settings > Closed user group > Off.
  SECURITY LEVELS
The security level determines your access to features when a nonowner SIM card is 
used. A nonowner SIM card is one (other than the original) that is inserted after you 
power off the phone. There are three security levels:
Off—Owner and Nonowner cards are treated the same. 
						

							Nokia 3200 User Guide 27Copyright © Nokia 2003 Phone security
Memory—Nonowner cards can access SIM memory. Any changes to the memory 
setting requires the security code.
The owner card has access to all features, but the security code is required to 
change a memory setting.
Phone—The security code is required upon power-up.
Use this procedure to set your security level.
1From the menus, select Settings > Security settings > Security level. After a brief pause, you are prompted to enter the security code.  The default code is 12345. 
2Enter the security code and select OK > Off, Memory, or Phone. A message appears in the display confirming your selection
  ACCESS CODES
With the following access codes, you can keep your information safe:
 Security code (4–8 digits) PIN code and PIN2 code (4–8 digits) PUK code and PUK2 code (8 digits) Call barring password (4 digits)
Note: Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialing of the emergency number.
Security code
The security code controls access to features such as the security level and is 
supplied with the phone. The preset code is 12345.
Note: If you enter the wrong security code five times in succession, you will not be able to enter a code for five minutes, even if you power off the 
phone between incorrect entries.
Once you change the security code from its preset of 12345, keep the new code 
secret and in a safe place separate from your phone. Use this procedure to change 
your security code.
1From the menus, select Settings > Security settings > Access codes > Change 
security code.
After a brief pause, you are prompted to enter the current security code 
(default is 12345).
2Enter the current security code and select OK. You are prompted to enter the new security code.
3Enter the new security code (up to 10 characters) and select OK.  
						

							28 Copyright © Nokia 2003
You are prompted to reenter the new security code for verification.
4Enter the new security code again and select OK. A message appears in the display confirming your security code has been 
changed.
PIN code
Before you can change your PIN code, you need to enable PIN code request. See “PIN code request” on page 23.
1From the menus, select Settings > Security settings > Access codes > 
Change PIN code.
After a brief pause, you are prompted to enter the current PIN code. 
2Enter the PIN code and select OK. You are prompted to enter the new PIN code. 
3Enter the new PIN code and select OK.You are prompted to reenter the new PIN code for verification.
4Enter the new PIN code and select OK. A message appears in the display confirming your PIN code has  been changed.
PIN2 Code
The PIN2 code is required for features such as Fixed dialing. If you enter an 
incorrect PIN2 code three times in succession, the PIN2 code is blocked and you 
will have to enter the PUK2 code.
Note: The original PIN2 code must be obtained from your service provider.
Use this procedure to change your PIN2 code.
1From the menus, select Settings > Security settings > Access codes > 
Change PIN2 code. 
You are prompted to enter the current PIN2 code.
2Enter the current PIN2 code and select OK. You are prompted to enter the new PIN2 code.
3Enter the new PIN2 code and select OK. You are asked to verify the new PIN2 code by entering it again.
4Enter the new PIN2 code and select OK. A message appears in the display confirming you have changed the PIN2 code.