Nitsuko Portrait 308 Hardware Manual

VOICEMAIL
4-25
Using Voice Mail (Figure 4-15)
The Portrait System is compatible with the NVM-202ex or
NVM-22 (P/N 17590A) Voice Mail Systems.  This feature
provides telephone users with comprehensive Voice
Messaging and Auto Attendant capabilities.  The system has
a capacity of five voice mail ports.
System Requir
ements:
l NVM-202ex (P/N 17670) software 6.01 or higher OR
NVM-22 (P/N 17590A) software 7.01 or higher Voice Mail
Units.
l Portrait 308 with software version 1.00 or higher.
NOTE:  The Voice...

VOICE MAIL
4-26
ORN-WHTto YELLOWlug
5.Back at the MDF, run two pairs of cross-connect wires
between the pins on the B block and cross-connect block
to complete the connection.
6.Install bridging clips as required.
7.  Using a four-conductor line cord, connect the first modu-
lar jack to ÒLINE1Ó on the Voice Mail Interface.  Then,
connect the second modular jack to ÒLINE2Ó on the
Voice Mail Interface.
If ÒLINE1Ó fails due to improper installation for an
equipment problem, ÒLINE2Ó will not function.
8....

VOICEMAIL
4-27 Figure 4-15  INSTALLING VOICE MAIL
BLK
RED
GRN BLU-WHTORN-WHTWHT-ORN
WHT-BLU
8240 - 62a
YEL
BLK
RED
GRN BLU-WHTORN-WHT
WHT-ORN
WHT-BLUYEL
BLU-WHT
ORN-WHT WHT-ORNWHT-BLU
BLU-WHT
ORN-WHT WHT-ORNWHT-BLU
25-Pair Cable
to Portrait KSU
Extension
Modular
JackExtension
Modular
Jack
Twisted Pair
Station Cable
VOICE MAIL INTERFACE
VOICE MAILLINE2LINE1
4-Conductor
Line Cord
NVM-22Connector for
Ports 1 and 2
NVM-202ex
Connector for
Ports 1 and 2
HDWRY1-Aa.QXD  10/15/97 7:44 AM  Page 4-27 

WALL MOUNT KITS
4-28
Using the Wall-Mount Kit
You can use a wall-mount kit to attach any key telephone to
a wall. The wall-mount kit includes a mounting bracket,
wall-mount screws and a handset hanger.  When a phone is
wall-mounted, the directory tray located beneath the phone
can not be used.
Note: The wall-mount kit currently does not accommodate
installing on a wall plate.
Installing the Wall-Mount Handset Hanger 
(Figure 4-16)
1. Insert the handset hanger in the slot provided beneath the
telephoneÕs...

WALLMOUNT KITS
4-29
Wall-Mounting a Key Telephone (Figure 4-17)
1.Mount the wall-mount kitÕs plastic bracket in the desired
location using the screws provided.
2.Insert the telephoneÕs line cord from the 625 modular
jack through the plastic bracket using the space provided
in the bracket.
4.Place the telephone on top of the plastic bracket on the clips
provided. Gently push the bottom of the bracket in until it
snaps into the slots on the phone.
Figure 4-17  INSTALLING THE WALL MOUNT BRACKETS
82400 - 33...

4-30
- For Your Notes -
HDWRY1-Aa.QXD  10/15/97 7:45 AM  Page 4-30 

5-1
Section 5
Specifications and Parts List
In this section. . . Page
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3
Parts List  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7
5. Specifications and
Parts List
HDWRY1.QXD  10/21/97 8:33 AM  Page 5-1 

5-2
5. Specifications and
Parts List
HDWRY1.QXD  10/21/97 8:33 AM  Page 5-2 

SPECIFICATIONS
5-3
System Capacities
Tenant Groups: 4
Cabinets: 1
Talk Timeslots (Intercom/line): 2
Analog Trunks (CO/PBX lines): 3
Electronic Key and/or Analog Telephones: 8
(6 single line telephones maximum)
Power Failure Telephones: 1
Door Boxes: 2
Door Box/Music On Hold Relays: 2
Alarm Sensors: 1
External Paging Zones: 1
Internal Paging Zones: 4
Speed Dial, Personal: 10
Speed Dial, System: 100
Caller ID Circuits: 3
Voice Mail Ports: 5
PCBs
Auxiliary PCB: 1
Caller ID PCB: 1
CPU Central Processing...

SPECIFICATIONS
5-4
Power Requirements
A dedicated 110 VAC 60 Hz 15 amp circuit (terminated in a NEMA 5-
15R receptable) located within six feet of the cabinet is required. You
should install a separate dedicated outlet for each cabinet.
Environmental Specifications
Cabinets and Key TelephonesDoor Box
Temperature: 0-45oC (32-113oF)Temperature: -20-60oC (-4-140oF)
Humidity: 10-95% (non-condensing)Humidity: 10-95%
(non-condensing)
Electrical Specifications
Power Supply:110 VAC ±- 10% @ 50-60 Hz
15 amps...