Nikon Coolpix S80 User Manual

							139
Connecting to a Printer
Connecting to Televisions, Computers and Printers
Connecting the Camera to a Printer
1Close the slide cover to turn off the camera.
2Turn on the printer.
Check printer settings.
3Connect the camera to the printer using the supplied USB cable.
4The camera is automatically turned on.
When properly connected, the PictBridge startup 
screen (
1) will be displayed in the camera monitor, 
followed by the print selection screen (
2).
12/1215/11/2010 Print selection12
Downloaded From camera-usermanual.com Nikon Manuals 
						

							140
Connecting to a Printer
Connecting to Televisions, Computers and Printers
BNotes on Connecting/Disconnecting Cable
•Be sure that connectors are properly oriented. Do not attempt to insert connectors at an angle, 
and do not use force when connecting or disconnecting the USB cable.
•Open and close the slide cover to turn off the camera before disconnecting the USB cable.
BIf the PictBridge Startup Screen is not Displayed
Turn the camera off and disconnect the USB cable. Set the Charge by computer option (A159) 
in the camera’s setup menu to Off and reconnect the cable again.
Downloaded From camera-usermanual.com Nikon Manuals 
						

							141
Connecting to a Printer
Connecting to Televisions, Computers and Printers
Printing Pictures One at a Time
After properly connecting the camera to the printer (A139), follow the 
procedures described below to print a picture.
1Tap C or D to choose the desired 
picture, and tap I.
Previous or subsequent picture can also be 
viewed by tapping the scroll bar.
Tap o to display 12 thumbnails, and n to 
switch back to full-frame playback.
2Tap Copies.
3Tap the desired number of copies 
(up to nine).
4Tap Paper size.
5Tap the desired paper size.
Tap A or B to display additional options.
To specify paper size using settings on the 
printer, tap Default in the paper size option.
12/12 15/11/2010 Print selection
Start print
Paper size Copies PictBridge
4 1
75 2
86 3
9
Copies
Start print
Paper size Copies PictBridge
Default
3.5×5 in.
100×150 mm 5×7 in. Paper size
1/2
Downloaded From camera-usermanual.com Nikon Manuals 
						

							142
Connecting to a Printer
Connecting to Televisions, Computers and Printers
6Tap Start print.
7Printing begins.
Monitor display returns to the print selection 
screen shown in step 1 when printing is 
complete.
To cancel printing before all copies have been 
printed, tap Cancel.
Printing Multiple Pictures
After properly connecting the camera to the printer (A139), follow the 
procedures described below to print multiple pictures.
1When the print selection screen is 
displayed, tap F.
The print menu is displayed.
2Tap Paper size.
To exit the print menu, tap J.
Start print
Paper size Copies PictBridge
002/004Printing
Cancel
Current number of copies/
total number of copies
12/12 15/11/2010 Print selection
Print selection
Print all images
Paper size DPOF printing Print menu
Downloaded From camera-usermanual.com Nikon Manuals 
						

							143
Connecting to a Printer
Connecting to Televisions, Computers and Printers
3Tap the desired paper size.
Tap A or B to display additional options.
To specify paper size using settings on the 
printer, tap Default in the paper size option.
4Tap Print selection, Print all 
images or DPOF printing.
Print selection
Choose pictures (up to 99) and the 
number of copies (up to nine) of 
each.
•Tap the desired pictures and tap 
A or B at the upper left in the 
monitor to specify the number of 
copies to be printed.
•Pictures selected for printing can 
be recognized by the check mark 
(w) and the numeral indicating the number of copies to be printed. Revert 
the number of copies to [0] to cancel the selection of the picture.
•Tap n to switch back to full-frame playback, and o to display 9 thumbnails.
•Tap n to remove print marking from all pictures.
•Tap I when setting is complete. 
•When the screen shown at right is 
displayed, tap Start print to print.
•To return to the print menu, tap 
Cancel.
Default
3.5×5 in.
100×150 mm 5×7 in. Paper size
1/2
Print selection
Print all images
Paper size DPOF printing Print menu
112/ 20
×1×1×1×1
×1×1
×1×1
×1×1 15/11/2010 Print selection
005 prints
Cancel Start print Print selection
Downloaded From camera-usermanual.com Nikon Manuals 
						

							144
Connecting to a Printer
Connecting to Televisions, Computers and Printers
5Printing begins.
Monitor display returns to the print menu 
shown in step 2 when printing is complete.
To cancel printing before all copies have been 
printed, tap Cancel.
CPaper Size
The camera supports the following paper sizes: Default (the default paper size for the printer 
connected to the camera), 3.5 × 5 in., 5 × 7 in., 100 × 150 mm, 4 × 6 in., 8 × 10 in., Letter, A3, and 
A4. Only sizes supported by the printer will be displayed. To specify paper size using printer settings, 
choose Default in the Paper size option.
Print all images
One copy each of all pictures stored 
in the internal memory, or on the 
memory card, is printed.
•When the screen shown at right is 
displayed, tap Start print to print.
•To return to the print menu, tap 
Cancel.
DPOF printing
Print pictures for which a print order 
was created using the Print set 
option (A102).
•When the screen shown at right is 
displayed, tap Start print to print. 
To return to the print menu, tap 
J.
•To view the current print order, 
tap View images. To print 
pictures, tap I.
005 prints
Cancel Start print Print all images
020 prints
View images Start print DPOF printing
12/ 20
15/11/2010 View images
002/004Printing
Cancel
Current number of copies/ 
total number of copies
Downloaded From camera-usermanual.com Nikon Manuals 
						

							145
Basic Camera Setup
Basic Camera Setup
The Setup Menu
The setup menu contains the following options.
cWelcome screenA147
Choose whether or not a welcome screen is displayed when camera is turned on.
dDateA148
Set camera clock and choose home and destination time zones.
eMonitor settingsA151
Set the photo information displayed in playback mode, the image review settings, 
and the monitor brightness.
fDate imprintA152
Imprint shooting date and time on pictures.
gVibration reductionA153
Choose whether or not vibration reduction is enabled.
hAF assistA154
Enable or disable AF-assist illuminator.
uDigital zoomA154
Enable or disable digital zoom.
iSound settingsA155
Adjust sound and volume when operating the camera.
kAuto offA155
Set time before the monitor turns off for saving power.
l/mFormat memory/Format cardA156
Format internal memory or memory card.
nLanguageA157
Choose the language used for camera monitor display.
HTV settingsA158
Adjust settings necessary for connection to television.
VCharge by computerA159
Choose whether or not to charge the camera battery when connecting to a 
computer via the USB cable.
dBlink warningA159
Specify whether or not the camera detects human faces that have blinked with 
shooting using face detection.
pReset allA161
Restore camera settings to default values.
hCopyA164
Copy files between memory card and internal memory.
rFirmware versionA165
Display camera firmware version.
Downloaded From camera-usermanual.com Nikon Manuals 
						

							146
The Setup Menu
Basic Camera Setup
Operating the Setup Menu
1Tap the bottom tab in shooting or 
playback mode.
See “Opening the Tabs” (A12) for more 
information.
2Tap z.
The setup menu is displayed.
3Tap the desired option.
Tap B or C to display previous or 
subsequent page.
Tap J to return to the previous screen.
When I is displayed in a screen, tap I to 
apply the setting.
To exit the setup menu, tap J or press the 
shutter-release button (when shooting).
W
T
363636
W
T
OFFOFFOFF0.00.00.0
Set up
Date
Date imprint
AF assist Welcome
screen
Monitor
settings
Vibration
reduction
Downloaded From camera-usermanual.com Nikon Manuals 
						

							147
The Setup Menu
Basic Camera Setup
c Welcome Screen
Choose whether or not a welcome screen is displayed when the camera is turned 
on.
Tap the bottom tab (A146) M z (Setup menu) M c Welcome screen
None (default setting)
The camera enters shooting or playback mode without displaying the welcome 
screen.
COOLPIX
The camera displays a welcome screen and enters shooting or playback mode.
Select an image
Displays a picture selected for the 
welcome screen. When the Select 
image screen is displayed, select a 
picture and tap I.
•In the Select image screen, tap n to 
switch to full-frame playback and tap 
o to switch back to 9-thumbnail 
display.
•As the selected picture is stored in the 
camera, it will be displayed when the camera is turned on even if the original 
picture is deleted.
•Copies created at a size of 320 × 240 or smaller using the crop (A123) or small 
picture (A122) function cannot be selected.
Select image
Downloaded From camera-usermanual.com Nikon Manuals 
						

							148
The Setup Menu
Basic Camera Setup
d Date
Set the camera clock.
Selecting Travel Destination Time Zone
1Tap Time zone.
The time zone screen is displayed.
2Tap x Travel destination.
The date and time displayed in the monitor 
changes according to the region currently 
selected. Tap the bottom tab (A146) M z (Setup menu) M d Date
Date
Set camera clock to current date and time.
Tap the items on the displayed 
screen to select the display order of 
the day, month and year, and set the 
date and time.
•To select the item: tap the desired item.
•To edit the highlighted item: tap A or 
B.
•To apply the setting: tap I (A21).
Time zone
Home time zone (w) can be specified and daylight saving time is enabled or 
disabled from Time zone options. When Travel Destination (x) is selected, local 
time (A150) is automatically calculated and shooting date and time in the 
selected region are recorded with pictures. Useful when travelling. 
Date
YMD MDYDMY
01 01
00 00:2010
Date
Date
Time zone
11 1520101330:
Time zone
London, Casablanca
Home time
zoneTravel
destination
11 1520101530:
Downloaded From camera-usermanual.com Nikon Manuals