Nikon Coolpix S6000 Users Manual

							139
Setup Menu
Basic Camera Setup
p Reset All
When Reset is selected, the camera’s settings will be restored to their default 
values.
Basic Shooting Functions
Shooting Menu
Scene Mode
Smart Portrait Menu
d button M z (Setup menu) (A121) M p Reset all
OptionDefault value
Flash mode (A30)Auto
Self-timer (A32)Off
Macro mode (A33)Off
Exposure compensation (A34)0.0
OptionDefault value
Image mode (A37)R 4320 × 3240
White balance (A39)Auto
Metering (A41)Matrix
Continuous (A42)Single
ISO sensitivity (A43)Auto
Color options (A44)Standard color
AF area mode (A45)Auto
Autofocus mode (A48)Single AF
OptionDefault value
Scene mode setting in the shooting-mode 
selection menu (A51)Scene auto selector
Hue adjustment in Food mode (A58) Center
Option Default value
Skin softening (A65)Normal
Smile timer (A65)On
Blink proof (A65)Off
Downloaded From camera-usermanual.com Nikon Manuals 
						

							140
Setup Menu
Basic Camera Setup
Subject Tracking Menu
Movie Menu
Setup Menu
Others
OptionDefault value
Autofocus mode (A68)Full-time AF
Face priority tracking (A68)On
OptionDefault value
Movie options (A103)HD 720p (1280 × 720)
Autofocus mode (A104)Single AF
OptionDefault value
Menus (A122)Text
Welcome screen (A123)None
Photo info (A127)Auto info
Brightness (A127)3
Date imprint (A128)Off
Vibration reduction (A129)On
Motion detection (A130) Auto
AF assist (A131)Auto
Digital zoom (A131)On
Button sound (A132)On
Shutter sound (A132)On
Auto off (A133)1 min
HDMI (A135)Auto
Charge by computer (A136)Auto
Blink warning (A137)Off
OptionDefault value
Paper size (A116, 117)Default
Frame interval for Slide show (A86)3 s
Downloaded From camera-usermanual.com Nikon Manuals 
						

							141
Setup Menu
Basic Camera Setup
•Selecting Reset all also clears the current file number (A146) from memory. 
Numbering will continue from the lowest number available. To reset file 
numbering to “0001”, delete all pictures stored in the internal memory or on the 
memory card (A87) before selecting Reset all.
•The following menu settings will remain unaffected when menus are reset with 
Reset all.
Shooting menu: Preset manual data (A40) acquired for White balance
Setup menu: Date (A124), Language (A135), and Video mode (A135)
r Firmware Version
View the current camera firmware version. 
d button M z (Setup menu) (A121) M r Firmware version
COOLPIX S6000 Ver.x.x
Back
Downloaded From camera-usermanual.com Nikon Manuals 
						

							142
Caring for the Camera
Caring for the Camera
Maximizing Camera Life and Performance
To ensure continued enjoyment of this Nikon product, observe the following 
precautions when using or storing the device.
BKeep dry
The device will be damaged if immersed in water or subjected to high humidity.
BDo not drop
The product may malfunction if subjected to strong shock or vibration.
BHandle the lens and all moving parts with care
Do not apply force to the lens, lens cover, monitor, memory card slot, or battery chamber. These 
parts are easily damaged. Applying force to the lens cover could result in camera malfunction or 
damage to the lens. Should the monitor break, care should be taken to avoid injury caused by 
broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes 
or mouth.
BDo not point the lens at strong light sources for extended periods
Avoid pointing the lens at the sun or other strong light sources for extended periods when using or 
storing the camera. Intense light may cause deterioration of the CCD image sensor, producing a 
white blur effect in photographs.
BKeep away from strong magnetic fields
Do not use or store this device in the vicinity of equipment that generates strong electromagnetic 
radiation or magnetic fields. Strong static charge or the magnetic fields produced by equipment 
such as radio transmitters could interfere with the monitor, damage data stored on the memory 
card, or affect the product’s internal circuitry.
BAvoid sudden changes in temperature
Sudden changes in temperature, such as when entering or leaving a heated building on a cold day, 
can cause condensation to form inside the device. To prevent condensation, place the device in a 
carrying case or a plastic bag before exposing it to sudden changes in temperature.
BTurn the product off before removing or disconnecting the power source
Do not remove the battery while the product is on, or while images are being recorded or deleted. 
Forcibly cutting power in these circumstances could result in loss of data or in damage to product 
memory or internal circuitry.
Downloaded From camera-usermanual.com Nikon Manuals 
						

							143
Maximizing Camera Life and Performance
Caring for the Camera
CThe Battery
•Check the battery level before using the camera and replace or charge the battery if necessary. Do 
not continue charging once the battery is fully charged as this will result in reduced battery 
performance. Whenever possible, carry a fully charged spare battery when taking pictures on 
important occasions.
•Do not use the battery at ambient temperatures below 0 °C (32 °F) or above 40 °C (104 °F). 
•Charge the battery indoors with an ambient temperature of 5 °C to 35 °C (41 °F to 95 °F) before 
use.
•When charging the COOLPIX S6000 using the Charging AC adapter EH-68P or a computer, the 
charge capacity may decrease at ambient temperatures 45 °C to 60 °C (113 °F to 140 °F). 
•The battery is not charged at ambient temperatures below 0 °C (32 °F) or above 60 °C (140 °F). 
•Note that the battery may become hot during use; wait for the battery to cool before charging. 
Failure to observe these precautions could damage the battery, impair its performance, or prevent 
it from charging normally.
•On cold days, the capacity of batteries tends to decrease. Be sure that the battery is fully charged 
before heading outside to take pictures in cold weather. Keep spare batteries in a warm place and 
exchange as necessary. Once warmed, a cold battery may recover some of its charge.
•Dirt on the battery terminals can prevent the camera from functioning. Should the battery 
terminals become dirty, wipe them off with a clean, dry cloth before use.
•If the battery will not be used for some time, insert it in the camera and run it flat before removing 
it for storage. The battery should be stored in a cool location with an ambient temperature of 15 to 
25 °C (59 to 77 °F). Do not store the battery in hot or extremely cold locations.
•Always remove the battery from the camera or optional battery charger when it is not being used. 
When inserted, minute amounts of current are drawn from the battery even when not in use. This 
may result in excessive draining of the battery and complete loss of function. Turning the camera 
on or off while the battery is exhausted can result in reduced battery life. 
•Recharge the battery at least once every six months and completely exhaust it before returning it 
to storage.
•After removing the battery from the camera or optional battery charger, replace the supplied 
terminal cover and store in a cool place.
•A marked drop in the time a fully-charged battery retains its charge, when used at room 
temperature, indicates that the battery needs to be replaced. Purchase a new EN-EL12 battery.
•Replace the battery when it no longer holds a charge. Used batteries are a valuable resource. 
Please recycle used batteries in accordance with local regulations.
Downloaded From camera-usermanual.com Nikon Manuals 
						

							144
Maximizing Camera Life and Performance
Caring for the Camera
Cleaning
Do not use alcohol, thinner, or other volatile chemicals.
Storage
Turn the camera off when not in use. Be sure that the power-on lamp is off before 
putting the camera away. Remove the battery if the camera will not be used for an 
extended period. Do not store the camera with naphtha or camphor moth balls, or 
in any of the following locations:
•Next to equipment that produces strong electromagnetic fields, such as 
televisions or radios
•Exposed to temperatures below –10 °C (14 °F) or above 50 °C (122 °F)
•Places that are poorly ventilated or subject to humidity of over 60%
To prevent mold or mildew, take the camera out of storage at least once a month. 
Turn the camera on and release the shutter a few times before putting the camera 
away again.
CNotes on the Monitor
•The monitor may contain a few pixels that are always lit or that do not light. This is a characteristic 
common to all TFT LCD displays, and does not indicate a malfunction. Images recorded using the 
product will not be affected.
•White or colored streaks may be visible when bright subjects are framed in the monitor. This 
phenomenon, known as “smear,” occurs when extremely bright light strikes the image sensor; it is 
characteristic of image sensors and does not indicate a malfunction. Smear may also take the form 
of partial discoloration in the monitor during shooting. It does not appear in images recorded with 
the camera except in the cases of movies and of images recorded with Multi-shot 16 selected for 
Continuous. When shooting in these modes, we recommend that you avoid bright subjects such 
as the sun, reflected sunlight, and electric lights.
•Images in the monitor may be difficult to see under bright lighting.
•The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your 
Nikon-authorized service representative.
LensAvoid touching glass parts with your fingers. Remove dust or lint with a blower 
(typically a small device with a rubber bulb attached to one end that is pumped 
to produce a stream of air out the other end). To remove fingerprints or other 
stains that cannot be removed with a blower, wipe the lens with a soft cloth, 
using a spiral motion that starts at the center of them and working toward the 
edges. If this fails, clean the lens using a cloth lightly dampened with 
commercial lens cleaner.
MonitorRemove dust or lint with a blower. To remove fingerprints and other stains, 
clean the monitor with a soft, dry cloth, being careful not to apply pressure.
BodyUse a blower to remove dust, dirt, or sand, then wipe gently with a soft, dry 
cloth. After using the camera at the beach or other sandy or dusty 
environment, wipe off any sand, dust, or salt with a dry cloth lightly dampened 
with fresh water and dry thoroughly. Note that foreign matter inside the 
camera could cause damage not covered by the warranty.
Downloaded From camera-usermanual.com Nikon Manuals 
						

							145
Technical Notes and Index
Technical Notes and Index
Optional Accessories
* When using in other countries, use a plug adapter (available commercially) as necessary. 
For more information about plug adapters, consult your travel agency.
Approved Memory Cards
The following Secure Digital (SD) memory cards have been tested and approved 
for use in this camera.
Memory cards with an SD Speed Class
1 rating of 6 or faster are recommended for 
recording movies. Movie recording may stop unexpectedly when memory cards 
with a lower Speed Class rating are used.
1Specification defining minimum data transfer speeds for SD and SDHC memory cards.2If the memory card will be used with a card reader or similar device, check that device 
supports 2 GB cards.
3SDHC compliant. 
If the memory card will be used with a card reader or similar device, check that 
device supports SDHC.
Contact the manufacturer for details on the above cards.
Rechargeable batteryRechargeable Li-ion Battery EN-EL12
Charging AC adapterCharging AC Adapter EH-68P*, EH-68P (AR)*
Battery chargerBattery Charger MH-65
AC adapterAC Adapter EH-62F
Connecting the EH-62F
Be sure that the AC adapter cord has been properly aligned in 
AC adapter and battery chamber grooves before closing the 
battery-chamber/memory card slot cover. If the cord is not 
properly aligned in the grooves, the cover and cord may be 
damaged when the cover is closed.
USB cableUSB Cable UC-E6
Audio/video cableAudio Video Cable EG-CP14
SanDisk2 GB2, 4 GB3, 8 GB3, 16 GB3, 32 GB3
TOSHIBA2 GB2, 4 GB3, 8 GB3, 16 GB3, 32 GB3
Panasonic2 GB2, 4 GB3, 8 GB3, 12 GB3, 16 GB3, 32 GB3
Lexar2 GB2, 4 GB3, 8 GB3
Downloaded From camera-usermanual.com Nikon Manuals 
						

							146
Technical Notes and Index
Image/Sound File and Folder Names
Pictures, movies, or voice memos are assigned file names as follows.
•Files are stored in folders named with a folder number followed by an identifier: 
“P_” plus a three-digit sequential number for pictures taken in Panorama 
assist scene mode (e.g. “101P_001”; A61) and “NIKON” for all other pictures 
(e.g. “100NIKON”). When the number of files within a folder reaches 9999, a new 
folder will be created. File numbers will be assigned automatically starting with 
“0001.”
•Voice memo file names have the same identifier and file number as the picture 
to which the voice memo is attached.
•Files copied using Copy>Selected images are copied to the current folder, 
where they are assigned new file numbers in ascending order starting from the 
largest file number in memory. Copy>All images copies all folders from the 
source medium; file names do not change but new folder numbers are 
assigned in ascending order, starting from the largest folder number on the 
destination medium (A92).
•A single folder can hold up to 200 pictures; if the current folder already contains 
200 pictures, a new folder, named by adding one to the current folder name, 
will be created the next time a picture is taken. If the current folder is numbered 
999 and contains 200 pictures, or a picture is numbered 9999, no further 
pictures can be taken until the internal memory or memory card is formatted 
(A134), or a new memory card is inserted.DSCN0001.JPG
Identifier (not shown on camera monitor)
Original still pictures (voice 
memo attachment included) 
and moviesDSCN
Small copies (voice memo 
attachment included)SSCN
Cropped copies (voice memo 
attachment included)RSCN
Quick retouch copies, 
D-Lighting copies and Skin 
softening copies (voice 
memo attachment included)FSCN
Extension (indicates file format)
Still pictures.JPG
Movies.MOV
Voice memos.WAV
File number (assigned automatically in 
ascending order, starting with “0001”)
Downloaded From camera-usermanual.com Nikon Manuals 
						

							147
Technical Notes and Index
Error Messages
The following table lists the error messages and other warnings displayed in the 
monitor, as well as the solutions for dealing with them.
DisplayProblemSolutionA
O (blinks) Clock not set. Set date and time. 124
BBattery running low.Prepare to charge or replace 
battery.12, 14
N
Battery exhausted.Battery exhausted. Charge or replace battery. 12, 14
P
Battery temperature 
highBattery temperature is 
high.Turn off camera, and allow 
battery to cool down before 
resuming use. After 
five seconds, this message will 
disappear, the monitor will 
turn off, and the power-on 
lamp will blink rapidly. After 
the lamp blinks for three 
minutes, the camera will turn 
off automatically. Pressing the 
power switch also turns off 
the camera.17
Q (● blinks red) Camera cannot focus.•Refocus.
•Use focus lock.26, 27
46
P
Please wait for the 
camera to finish 
recording.Camera cannot perform 
other operations until 
recording is complete.Wait until message clears 
from display automatically 
when recording is complete.–
u
Memory card is write 
protected.Write-protect switch is 
in “lock” position.Slide write-protect switch to 
“write” position.21
P
This card cannot be 
used.
Error accessing memory 
card.•Use approved card.
•Check that terminals are 
clean.
•Confirm that memory card 
is correctly inserted.145
20
20 P
This card cannot be 
read.
Downloaded From camera-usermanual.com Nikon Manuals 
						

							148
Error Messages
Technical Notes and Index
P
Card is not formatted. 
Format card?
Yes
NoMemory card has not 
been formatted for use 
in COOLPIX S6000.Formatting deletes all data 
stored on the memory card. 
Be sure to select No and make 
copies of any pictures which 
need to be kept before 
formatting the memory card. 
Select Yes and press the k 
button to format the memory 
card.21
u
Out of memory.Memory card is full.•Choose smaller image size.
•Delete pictures.
•Insert new memory card.
•Remove memory card and 
use internal memory.37
28, 87, 
105
20
20
P
Image cannot be 
saved.Error occurred while 
recording picture.Format internal memory or 
memory card.134
Camera has run out of 
file numbers.Insert a new memory card or 
format internal memory or 
memory card.146
Picture cannot be used 
for welcome screen.The following pictures cannot 
be registered as welcome 
screen.
•Pictures taken at an Image 
mode setting of P 4224 × 
2376
•Pictures reduced to 320 × 
240 size or smaller with 
cropping or small picture 
editing123
Insufficient space to 
save a copy.Delete pictures from 
destination.87
P
Sound file cannot be 
saved.A voice memo cannot 
be attached to this file.•Voice memos cannot be 
attached to movies.
•Select a picture taken with 
this camera.–
91
u
A blink was detected 
in the picture just 
taken.One or more portrait 
subjects may have 
blinked when the 
picture was taken.Check the picture in playback 
mode.65, 69
N
Image cannot be 
modified.Cannot edit selected 
picture.•
Select pictures that support 
editing function.
•Movies cannot be edited.93
–
DisplayProblemSolutionA
Downloaded From camera-usermanual.com Nikon Manuals