Nikon Coolpix S200 User Manual

7
The Monitor
IntroductionPlayback
15/05/2007 00:0015/0 5/2 007 0 0:0 015/05/2007 00:00
9999.JPG
9999.J P G9999.JPG
9999
9 999/999999999999/9999
t
e
qw
r
y
i u
o
!2
! 3
!
6
!5
!4
!0
!1
a
ba
b
!7
0h00m00s0h00m 00s0h00m00s
1 Date of recording ....................... 16
2Time of recording....................... 16
3Internal memory indicator .......... 26
4Battery level indicator ................. 20
5File number and type................ 115
6Volume indicator .................. 53, 64
7Current frame...

8
Introduction
Basic Operations
The i (shooting/playback) Button
The  C  (mode) Button
Press C  during shooting to display the shooting-
mode selection menu, or during playback to display
the playback-mode selection menu. Use the multi
selector and press the  d button to choose the
desired mode.
• Press  i to switch between the mode-selection
menus for shooting mode and playback mode.
Shooting-mode Selection Menu
Playback-mode Selection Menu
Press  i once in shooting mo de to enter full-frame
playback;...

9
Basic Operations
Introduction
The m  Button
Press  m to display the menu for the
selected mode.
• To display the setup menu for shooting or playback mode, choose Z in the 
shooting-mode or playback-mode  selection menu and then press d (c8, 100).
Navigating the Menus
The multi selector is used for menu navigation.L
Shooting menu  c83 iPlayback menu c94
K  High-sensitivity menu  c83 JCalendar menu c57
n Scene menu  c34 LList by date menu c57
A
One-touch portrait menuc 44 wPrint menu c78
T Movie menu...

10
Basic Operations
Introduction
Making a Selection
• The selection for some options is made from a sub-menu. Press d button or 
multi selector to right the sub-menu.
• To return to the previous menu without making a selection, press the multi  selector to the left.
• To exit the menu, press  m button.
Press  m button to 
display menus.
Shooting menu
Exit
Image mode
White balance
Continuous
BSS
ISO sensitivityUse multi selector to 
select menu.
lSome menus contain multiple pages.
Press multi selector up...

11
Basic Operations
Introduction
Turning On and Off the Camera
To turn on the camera, press the power switch. The
power-on lamp (green) will light and the monitor
will turn on. To turn off the camera, press the
power switch again.
If the camera is turned off, hold down  i to turn
the camera on in playback mode ( c26).
Help Displays
Press  l (v ) to view a description of the currently selected menu option. 
• To return to the or iginal menu, press l (v ) again.
• Press  m to return to shooting or...

12
First Steps
First Steps
Charging the Battery
The camera uses a Rechargeable Li-ion Battery EN-EL10 (supplied).
Charge the battery with the Battery Charger MH-63 (supplied) before first
use or when the battery is running low.
1Connect the power cable
Connect the power cable to the battery charger  1 and insert the wall plug into a
power outlet  2. The CHARGE lamp will light to show that the charger is on  3.
2Charge the battery
Insert the battery into the battery
charger.
The CHARGE lamp starts...

13
Charging the Battery
First Steps
3Unplug the charger
Remove the battery and unplug the charger when charging is complete.
jNote on the Battery Charger
Be sure to read and follow the warnings for the battery charger on pages iii and iv before
using the battery charger.
The supplied battery charger MH-63 is for use  only with a Rechargeable Li-ion Battery EN-
EL10. Do not use with incompatible batteries.
jNote on the Battery
Be sure to read and follow the warnings for th e battery on page iii and the...

14
First Steps
Inserting the Battery
Insert a Rechargeable Li-ion Battery EN-EL10 (supplied) that has been fully
charged, using the Battery Charger MH-63 (supplied), into your camera.
1Open the battery-chamber/memory card
slot cover.
2Insert the battery.
Confirm that the positive (+) and negative (-) termi-
nals are oriented correctly as described on the label at
the entrance of the battery chamber, and insert the
battery. The orange battery latch is pushed aside as
the battery is inserted.
The battery...

15
Inserting the Battery
First Steps
Removing the Battery
Turn the camera off before removing the battery.
To eject the battery, open the battery-chamber/
memory card slot cover and slide the orange bat-
tery latch in the direction shown  1. The battery
can then be removed by hand  2. 
• Note that the battery  may become hot during
use; observe due caution when removing the
battery.
Downloaded From camera-usermanual.com Nikon Manuals 

16
First Steps
Setting Display Language, Date, and Time
A language-selection dialog is displaye d the first time the camera is turned
on. 
1Press the power switch to turn on the
camera.
The power-on lamp will light and the monitor will
turn on.
2Use the multi selector to choose the
desired language and press  d.
For information on using the multi selector, see “Mak-
ing a Selection” ( c10).
3Choose [Yes] and press  d.
If [No] is selected, the date and time will not be set.
4Press  d.
The home time zone...