Nikon Camera D810 Users Manual

137
❚❚Canceling Bracketing
To cancel bracketing, press the  D button and rotate the main 
command dial until the number of shots in the bracketing 
sequence is zero ( r) and  M is no longer displayed.
 The 
program last in effect will be restored the next time bracketing is 
activated.
 Bracketing can also be cancelled by performing a 
two-button reset ( 0206), although in this case the bracketing 
program will not be restored the next time bracketing is 
activated.
AExposure and Flash Bracketing
In...

138
AExposure Bracketing
The camera modifies exposure by  varying shutter speed and aperture 
(programmed auto), aperture (shutter -priority auto), or shutter speed 
(aperture-priority auto, manual exposure mode).
 If  On  is selected for 
ISO sensitivity settings > Auto ISO sensitivity control  (0 111) in 
modes  e, f , and  g, the camera will modify exposure by varying ISO 
sensitivity and only vary shutter speed  and/or aperture if the limits of 
exposure system are exceeded.
 Custom Setting e7 ( Auto...

139
❚❚White Balance Bracketing
The camera creates multiple copies of each photograph, each 
with a different white balance.
 For more information on white 
balance, see page 148.
1Select white balance bracketing.
Choose  WB bracketing  for Custom 
Setting e6  Auto bracketing set .
2Choose the number of shots.
Pressing the D button, rotate the main command dial to 
choose the number of shots in the bracketing sequence.
 The 
number of shots is shown in the control panel.
At settings other than zero, a  W...

140
3Select a white balance increment.
Pressing the D button, rotate the sub-command dial to 
choose the white balance adjustment.
 Each increment is 
roughly equivalent to 5 mired.
Choose from increments of 1 (5 mired), 2 (10 mired), or 3 
(15 mired).
 Higher  B values correspond to increased amounts 
of blue, higher  A values to increased amounts of amber 
( 0 151).
 The bracketing programs with an increment of 1 are 
listed below.
Control panel displayNo. of 
shotsWhite balance  incrementBracketing...

141
4Frame a photograph, focus, and 
shoot.
Each shot will be processed to create 
the number of copies specified in the 
bracketing program, and each copy will have a different 
white balance.
 Modifications to white balance are added to 
the white balance adjustment made with white balance fine-
tuning.
If the number of shots in the 
bracketing program is greater than 
the number of exposures 
remaining,  n and the icon for 
the affected card will flash in the 
control panel, a flashing  j icon 
will...

142
❚❚Canceling Bracketing
To cancel bracketing, press the  D button and rotate the main 
command dial until the number of shots in the bracketing 
sequence is zero ( r) and  W is no longer displayed.
 The 
program last in effect will be restored the next time bracketing is 
activated.
 Bracketing can also be cancelled by performing a 
two-button reset ( 0206), although in this case the bracketing 
program will not be restored  the next time bracketing is 
activated.
AWhite Balance Bracketing
White...

143
❚❚ADL Bracketing
The camera varies Active D-Lighting over a series of exposures. 
For more information on Active D-Lighting, see page 182.
1Select ADL bracketing.
Choose  ADL bracketing  for Custom 
Setting e6  Auto bracketing set .
2Choose the number of shots.
Pressing the D button, rotate the main command dial to 
choose the number of shots in the bracketing sequence.
 The 
number of shots is shown in the control panel.
Number of shots
Control panel
ADL bracketing indicator
Main command 
dial
D...

144
At settings other than zero, a d icon and an ADL 
bracketing indicator will appear in the control panel and  D 
will be displayed in the viewfinder.
 Choose two shots to take 
one photograph with Active D-Lighting off and another at a 
selected value.
 Choose three to five shots to take a series of 
photographs with Active D-Lighting set to  Off, Low , and 
Normal  (three shots),  Off, Low , Normal , and High (four 
shots), or  Off, Low , Normal , High , and Extra high  (five shots).
 
If you choose...

145
Active D-Lighting is shown in the control panel.
Control panel displayActive D-Lighting
Y Auto
R Low
Q Normal
P High
Z Extra high 

146
4Frame a photograph, focus, and shoot.
The camera will vary Active D-Lighting shot-by-
shot according to the bracketing program 
selected.
 While bracketing is in effect, a 
bracketing progress indicator will be displayed in the control 
panel.
 A segment will disappear from the indicator after each 
shot.
❚❚ Canceling Bracketing
To cancel bracketing, press the  D button and rotate the main 
command dial until the number of shots in the bracketing 
sequence is zero ( r) and  d is no longer...